Mohamed Hazem Abdel Latif






Mohamed Hazem Abdel Latif

Emeritus Professor at Design and Production Engineering


Career Information

Emeritus at : 2006-08-01
Professor at : 1985-10-28
Assistant Professor at : 1980-04-28
Teacher at : 1974-06-25
Teacher Assistant at : 1972-12-04
Demonstrator at : 1967-10-01

Academic Information


Articles

Publications

  1. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " A study of some thermal and mechanical properties of HDPE blend with marble and granite dust ", Ain Shams Engineering Journal, 2019
  2. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " Mechanical behavior of PP reinforced with marble dust ", Construction and Building Materials, 2019
  3. Kareem Fathy Abo Elenien, Ayman Abdel-Wahab, Ramadan ElGamsy, Mohamed Hazem Abdellatif, " Assessment of the properties of PP composite with addition of recycled tire rubber ", Ain Shams Engineering Journal, 2018
  4. A. H. Awad, Ahmed W. Abdel-Ghany, Ayman A. Abd El-Wahab, Ramadan El-Gamasy & Mohamed Hazem Abdellatif, " The influence of adding marble and granite dust on the mechanical and physical properties of PP composites ", Journal of Thermal Analysis and Calorimetry, 2020
  5. A.H. Awad ⇑ , Ramadan El-Gamasy, Ayman A. Abd El-Wahab, Mohamed Hazem Abdellatif, " Assessment of mechanical properties of HDPE composite with addition of marble and granite dust ", Ain Shams Engineering Journal, 2020
  6. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " Mechanical and Physical Properties of PP and HDPE ", Engineering Science, 2020
  7. Bassant Hany Mousa Ramadan El gamsy Mohamed Hazem Abdel Latif, " Mechanical behaviour of rubber hybrid composites ", IOP Conference Series: Materials Science and Engineering, 2019
  8. Mohamed Mohamed Karbous* , Ayman Abd El Wahab, Ramadan El Gamasy, Mohamed Hazem Abdellatif, " Assessment of the Mechanical Properties of Marble and Granite Dust-High Impact Polystyrene Composites ", Engineering Science, 2020
  9. BASSANT HANY MOUSA, AYMAN ABDEL-WAHAB, RAMADAN EL-GAMASY, MOHAMED HAZEM ABDEL LATIF, " MECHANICAL BEHAVIOUR OF H2SO4 TREATED TIRE RUBBER- HDPE COMPOSITES ", International Journal of Mechanical And Production Engineering, 2016
  10. KARIM.F.ABO-EL-ENIN, AYMAN.A.ABDELWAHAB, M.H.ABDELLATIF, RAMDAN EL GAMASY, " PP REINFORCED WITH RECYCLED AND TREATED RUBBER PARTICLES ", International Journal of Mechanical And Production Engineering, 2016
  11. M. Atef Gabr, Ramadan El Gamsy,Mohamed HazemAbdelLatif, " Mechanical Properties of Metallic and Hybrid Polyurethane Foam Sandwich Composites ", International Journal of Scientific & Engineering Research, 2016
  12. M S Ahmed , T Attia1 , A A Abd El-Wahab, R Elgamsy and M H Abd El-latif, " Assessment of the physical properties of banana pseudo stem/ ABS composites ", IOP Conference Series: Materials Science and Engineering, 2019
  13. Bola Wagdy, Ayman A. Abd El-Wahab, Ramadan El-gamasy, " Statistical analysis of solid-state recycled aluminum alloy 2011 chips by hot extrusion ", Engineering Science and Military Technologies, 2023
  14. Mohamed Abdelaal, Mohamed Hazem Abdellatif Ahmed, Moritz Riede, Ghada Bassioni, " Studying the Effect of High Substrate Temperature on the Microstructure of Vacuum Evaporated TAPC: C<sub>60</sub> Organic Solar Thin Films ", Materials, 2021
  15. Awad, A.H., Aly Abd El-Wahab, A., El-Gamsy, R., Abdel-latif, M.H., " A study of some thermal and mechanical properties of HDPE blend with marble and granite dust ", Ain Shams Engineering Journal, 2019
  16. Awad, A.H., Abdellatif, M.H., " Assessment of mechanical and physical properties of LDPE reinforced with marble dust ", Composites Part B: Engineering, 2019
  17. Elsherif, D.M., Abd El-Wahab, A.A., Abdellatif, M.H., " Factors affecting stress distribution in wind turbine blade ", IOP Conference Series: Materials Science and Engineering, 2019
  18. Elsherif, D.M., Abd El-Wahab, A.A., Elgamsy, R.B.M., Abdellatif, M.H., " Material selection of wind turbine blade using finite element method ", International Journal of Scientific and Technology Research, 2019
  19. Awad, A.H., El-gamasy, R., A. Abd El-Wahab, A., Hazem Abdellatif, M., " Mechanical behavior of PP reinforced with marble dust ", Construction and Building Materials, 2019
  20. Yousri, O.M., Abdellatif, M.H., Bassioni, G., " Effect of Al <inf>2</inf> O <inf>3</inf> Nanoparticles on the Mechanical and Physical Properties of Epoxy Composite ", Arabian Journal for Science and Engineering, 2018
  21. Ramadan, N., Taha, I., Hammouda, R., Abdellatif, M.H., " Behaviour of hybrid SiC/jute epoxy composites manufactured by vacuum assisted resin infusion ", Polymers and Polymer Composites, 2017
  22. , " Use VARI Technique to produce Hybrid Sic - Jute Epoxy Composites ", , 2015
  23. , " Alkali Treatment of Jute Fabric for Vacuum Assisted Resin Infusion ", Second International Conference for Industry Academia Collaboration , Egypt, 2015
  24. , " Utilization of Granite Dust to Produce Floor and Wall Tiles ", , 2015
  25. , " Effect of Mechanical Treatment for Natural Fibers on the Mechanical Properties of Polypropylene Composites ", 1st International Conference on Natural Fibers , Portugal, 2013
  26. , " Mechanical Behavior of LDPE Composite reinforced with Natural Fibers ", 1st International Conference on Natural Fibers , Portugal, 2013
  27. , " Use of Recycled Rubber to Produce Tiles and other products ", , 2013
  28. , " Influence of Fibre and Matrix on the Mechanical Properties of Natural Composite Materials ", Journal of Al Azhar University, Engineering Sector JAUES, 2012
  29. , " Failure Modes of Sugar Cane Bagasse Fibres / Polypropelene Composites with two Parallel Pin Loaded Holes ", Journal of Al Azhar University , Engineering Sector JAUES, 2012
  30. , " Behaviors of Sandwich Materials ", , 2006
  31. , " Deformation and Failure of 3 D Braided Composites ", , 2006
  32. , " Mathematical Model for Intraply Hybrid Composites Characterization ", , 2005
  33. Taha, I., Abdellatif, M.H., Dietz, P., " Infiltration and coating of rapid prototyping parts ", Advanced Engineering Materials, 2005
  34. , " Effects of Lamination and Changes in Layer Thickness on Fatigue Crack Propagation of Lightweight Laminated Metal Composites ", Metallurgical and Materials Transactions A, 2004
  35. , " Fatigue Crack Propagation of Al 6090 / Sic p - AL 6013 Laminated Metal Composites ", Metallurgical and Materials Transactions A , 2004
  36. , " Effect of Changes in Temperature on Fatigue Crack Growth of Adhesively Bonded Al 2080/Sic/20 p-2080 Al Laminated Composites ", Journal of Materials Science, 2004
  37. Hassan, H.A., Lewandowski, J.J., Abd El-Latif, M.H., " Effects of Lamination and Changes in Layer Thickness on Fatigue-Crack Propagation of Lightweight Laminated Metal Composites ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2004
  38. Hassan, H.A., Lewandowski, J.J., Abd El-Latif, M.H., " Effects of changes in temperature on fatigue crack growth of adhesively bonded Al 2080/SiC/20p-2080 Al laminated composites ", Journal of Materials Science, 2004
  39. Hassan, H.A., Lewandowski, J.J., El-Latif, M.H.A., " Effects of changes in test temperature on fatigue crack propagation of Al6090/SiCp-Al 6013 laminated metal composites ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2004
  40. Abdel Latif, M.H., Rizk, M.A., " STRESS RUPTURE OF Al-Ni EUTECTIC COMPOSITES. ", , 1986
  41. Abdel Latif, M.H., El Mahallawy, N.A., Taha, M.A., " MECHANICAL PROPERTIES OF IN-SITU COMPOSITES. ", Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1985
  42. Abdel Latif, M.H., El Mahallawy, N.A., Taha, M.A., " Mechanical properties of In‐Situ Composites ", Materialwissenschaft und Werkstofftechnik, 1985
  43. El-Mahallawy, N.A., Abdel-Latif, M.H., Taha, M.A., " MICROSTRUCTURE OF IN-SITU COMPOSITES. ", Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1983
  44. El‐Mahallawy, N.A., Abdel‐Latif, M.H., Taha, M.A., " Microstructure of In‐Situ composites ", Materialwissenschaft und Werkstofftechnik, 1983
  45. Abdel Latif, M.H., Lawley, A., " Effect of oxidation on the toughness and strength of the co, Cr-(Cr,Co)7C3 In-Situ composite ", Metallurgical Transactions A, 1980
  46. Farag, M.M., Abd El Latif, M.H., " An analysis of the fatigue behavior of Al-Al <inf>3</inf>Ni composites ", Metallurgical Transactions A, 1976
  47. El Latif, M.H.Abd, El Wakil, S.D., " EFFECT OF MOLYBDENUM CONTENT ON THE MECHANICAL PROPERTIES OF SINTERED AND HEAT-TREATED STEEL COMPACTS. ", Powder Metallurgy, 1976
  48. Farag, M.M., Abd El Latif, M.H., " An analysis of the mechanical behavior of Al-Al<inf>3</inf>Ni composites ", Metallurgical Transactions A, 1975
  49. Mohamed Atef , Ghada Bassioni , Nahid Azab , Mohamed Hazem Abdellatif, " On the acoustical performance of eco-friendly cementitious composite with recycled fine rubber particles ", Construction and Building Materials, 2022
  50. Mohamed Atef , Ghada Bassioni , Nahid Azab and Mohamed Hazem Abdellatif, " Assessment of cement replacement with fine recycled rubber particles in sustainable cementitious composites ", Journal of the Mechanical Behavior of Materials, 2021
  51. noha ramadan, Iman taha, rawia Hammouda, and M.H. Abdellatif, " Behaviour of Hybrid SiC/Jute Epoxy Composites Manufactured by Vacuum Assisted Resin Infusion ", Polymers and Polymer Composites, 2017