Hala A. Abdel Hady Hassan






Hala A. Abdel Hady Hassan

Professor at Design and Production Engineering


Career Information

Professor at : 2016-05-30
Assistant Professor at : 2011-05-29
Teacher at : 2003-11-30
Teacher Assistant at : 1996-10-08
Demonstrator at : 1992-11-18

Academic Information


Brief

Professor of Materials Engineering with Design and Production Engineering Department, Ain Shams University since 2016. Both B.Sc. and M.Sc. were in Mechanical Engineering, Ain Shams University. Ph.D. research was conducted in Case Western Reserve University, Cleveland, Ohio-USA through Channel System, 2001-2003.
Research and teaching interests are primarily in the areas of processing/structure/property relationships in engineering materials; fatigue and fracture of composites, bulk metallic glass, and layered/laminated materials; failure analysis. Visiting professor with Materials science Dept. Case Western Reserve University, USA 2009, 2010 and 2011.

Awards

2008 فى مجال العلوم التكنولوجية المتقدمة- جائزة الدولة التشجعية
أفضل باجث قسم الهندسة الميكانيكية- هندسة عين شمس 
2013
* J. William Fulbright Scholar Award 2007

Books

Chapter:
 Hala A. Hassan and John J. Lewandowski, “Properties of Discontinuously Reinforced Metal Matrix: Composites and Laminates”, In: Saleem Hashmi (editor-in-chief). Reference Module in Materials Science and Materials Engineering, Oxford: Elsevier, pp 1-46, 2016
 Hala.A. Hassan and J.J. Lewandowski, “Fracture and Fatigue of Particulate Composites, Nano-Composites, and Laminates”, in Comprehensive Composite Materials (C. Zweben, ed.) – Vol. 4 - Metal Matrix Composites (T.W. Clyne, ed.), Elsevier, pp.86-136, 2018.

Articles

 Tolulope Akinkunmi Adewole, Hala A. Hassan, Oluyemi Ojo Daramola, Bahi Bakeer, Effect of chemical treatment on the tensile, and morphological properties of date palm/bagasse and hybrid reinforced polyester matrix composites, Scientific African, 2025, e02849, ISSN 2468-2276.

 Abdalrahman M Abdallah, Mohamed A Aly, Abdelkader A Ibrahim, H. A. Hassan, Waleed F Mohammed, “The Effect of Initial Surface Profile on the Surface Roughness and Roundness in Ball Burnishing Process”, Journal of Engineering Sciences, 2025, 53(5), pp. 140–157
 H M Lotfy, A B El-Shabasy, T A Attia and HA Hassan, "Assessment of steel wire's fatigue life using finite elements modelling and experimental testing" IOP Conf. Ser.: Mater. Sci. Eng. 973, 2020, 012013.
 A E Said, H A Hassan, T G Abu-El-Yazied and A M Makady, "Fracture Toughness Assessment of Axial Partially Through Cracks in X 65 and X70 Steel Pipes", IOP Conf. Ser.: Mater. Sci. Eng. 973, 2020, 012026.
 A M Magdy, A B El-Shabasy and H A Hassan, "Assessment of St. St. 316L joints welded by laser beam and metal active gas MAG Processes", IOP Conf. Ser.: Mater. Sci. Eng. 973, 2020, 012027.
 Rashed S. E., Hassan H. A., Abu-El-Yazied T. G. and El-Shabasy A. B, "Surface Improvement of 7075 alloy using Friction Stir Processing" , EGTRIB JOURNAL, Journal of The Egyptian Society of Tribology, EGTRIB JOURNAL, Journal of The Egyptian Society of Tribology, Vol. 17, No. 1, April 2020, pp. 1 – 12, ISSN 2090 - 5882.
 H. A. Hassan, A. K. Hellier, A. G. Crosky, J. J. Lewandowski, “Fracture Toughness of Cast and Extruded Al6061/15%Al2O3p Metal Matrix Composites”, AJME: Australian Journal of Mechanical Engineering, Issue sup1: Design, Manufacturing and Materials, Vol. 18, pp. S37-S45, 2020.
 M. H. Abd El-Aziz, A.B. El-Shabasy, M. M. Z. Ahmed, H.A. Hassan, " Assessment of AA7075/SiO2 surface composites fabricated by friction stir processing (FSP)", The 18th International Conference on Aerospace Sciences & Aviation Technology (ASAT-18)
April 9 - 11, 2019, Cairo, Egypt.

 Hala A. Hassan and John J. Lewandowski, “Effects of Particulate Volume Fraction on Cyclic Stress Response and Fatigue Life of AZ91D Magnesium Alloy Metal Matrix Composites”, Materials Science and Engineering A, 600, April (2014), pp. 188–194.
 Hala A. Hassan, and John J. Lewandowski, “Effects of Mixed Mode Loading on the Fracture Toughness of Bulk Metallic Glass/W Composites” Materials Science and Engineering A, 586 (2013), pp. 413-417.
 Hala A. Hassan, Adel B. El-Shabasy, and John J. Lewandowski “The Effect of Mixed Mode I/II on the Fracture toughness and Fracture Behavior of Nano-structured Metal Matrix Composites”, Materials Science and Engineering A, 559, (2013), pp. 897-901.
 A.B. El-Shabasy, H.A. Hassan, and J.J. Lewandowski, “Effects of load ratio, R, and test Temperature on High Cycle Fatigue Behavior of Nano-structured Al–4Y–4Ni–X alloy Composites”, Materials Science & Engineering A, 558, 2012, pp. 211-216.

Hala A. Hassan et. al, “Effects of Composition Changes on Strength, Bend Ductility, Toughness, and Flex-Bending Fatigue of Iron-Based Metallic Glass Ribbons”, Met. & Matr. Trans. A, 43 (8), pp. 2697-2705, 2012

 Hala A. Hassan, Adel B. El-Shabasy, John J. Lewandowski, “The effects of changes in test temperature and loading conditions on fracture toughness of a toughened Zr-based bulk metallic glass composite”, Mater. Sci. Eng. A, 540, pp. 97-101, 2012

. Hala A. Hassan et. al, “Effects of load ratio, R, and test temperature on high cycle fatigue behavior of nano-structured Al–4Y–4Ni-X alloy composites”, Mater. Sci. Eng. A 558 (12), pp. 211-216, 2012

. Hala A. Hassan et. al, “The effect of mixed mode I/II on the
fracture toughness and fracture behavior of nano-structured metal matrix composites”, Mater. Sci. Eng. A, 559, pp. 897-901, 2013.
. Hala A. Hassan et. al “Effects of Mixed Mode Loading on the Fracture Toughness of Bulk Metallic Glass/W Composites” Materials Science and Engineering A, 586, pp. 413-417, 2013.
 Hala A. Hassan et. al., “Effects of Particulate Volume Fraction on Cyclic Stress Response and Fatigue Life of AZ91D Magnesium Alloy Metal Matrix Composites”, Mater. Sci. Eng. A,, 600, pp. 188–194, l 2014,.
 A.B. El-Shabasy, H.A. Hassan, and J.J. Lewandowski, “Effects of load ratio, R, and test Temperature on High Cycle Fatigue Behavior of Nano-structured Al–4Y–4Ni–X alloy Composites”, Materials Science & Engineering A, 558, 2012, pp. 211-216.
 A.B. El-Shabasy, H.A. Hassan, and J.J. Lewandowski, “Effects of Composition Changes on Strength, Bend Ductility, Toughness, and Flex Bending Fatigue of Iron Based Metallic Glass Ribbons”, Metallurgical and Materials Transactions A, 43 (8), 2012, pp. 2697-2705.
 Hala A. Hassan, Adel B. El-Shabasy, and John J. Lewandowski “The Effects of Changes in Test Temperature and Loading Conditions on Fracture Toughness of a β Toughened Zr-based Bulk Metallic Glass Composite”, Materials Science and Engineering A, 540, 2012, pp. 97-101
 H. A. Hassan, “Effect of mixed mode I/II on fracture behavior of laminated metal matrix composites”, Materials Science and Technology, 27 (7), 2011, pp.1170-1176.

 Hala A. Hassan, Adel B. El-Shabasy, and John J. Lewandowski "Putting the heat on nano-composite aluminum alloys" Metal Powder Report, 64 (5), 2009, pp. 28-34.

 Hala A. Hassan and John J. Lewandowski, “Laminated Nanostructure Composite with Improved Bend Ductility and Toughness”, Scripta Mater., 61(11), 2009, pp. 1072-1074.

 Adel El-Shabasy, Hala Hassan, Yi Liu, Dingqiang Li and J. J. Lewandowski, "High Cycle Fatigue Behavior of a Nano-Structured Composite Produced via Extrusion of Amorphous Al89Gd7Ni3Fe Alloy Powders", Materials Science and Engineering A , 513-514, 2009, pp. 202-207.
 Hala Hassan, Adel B. El-Shabasy, M.H. Abd El-latif, “Utilization of the Agricultural Residues in Natural Fiber Polymer Composites (NFPCs)”, Third Ain Shams University International Conference on Environmental Engineering, April 14-16, 2009, Cairo Egypt.
 Hala A. Hassan and John J. Lewandowski, "Effects of Changes in Notch Radius and Test Temperature on the Toughness of a Nano-crystalline Aluminum Alloy Composites Produced via Extrusion of Amorphous Aluminum Alloy Powders., Materials Science and Engineering A, 497, December 2008, pp. 212-215.
 Hala A. Hassan, Laszlo Kecskes, and John J. Lewandowski, “Effects of Changes in Test Temperature and Loading conditions on Fracture Toughness of a Zr-based Bulk Metallic Glass, Metallurgical and Materials Transactions A, 39, Sept. 2008, pp. 2077-2085.

 Todd M. Osman, Hala A. Hassan, and John J. Lewandowski, “Interface Effects on the Quasi-Static and Impact Toughness of Discontinuously Reinforced Aluminum Laminates”, Metallurgical and Materials Transactions A, 39, August 2008, pp. 1993-2006.

 H. A. Hassan and J.J. Lewandowski, "Effect of High Temperature and Thermal Exposure on Fatigue Crack Propagation of Laminated Metal Composites LMCs", Mater. Sci. and Technology, 23(12), pp. 1505-1512, 2007.

 Hala A. Hassan, J.J. Lewandowski, M.H. Abd El-latif, “Effects of Change in Temperature on Fatigue Crack Growth of Adhesively Bonded A1 2080/SiC/20p-2080 A1 Laminated Composites”, Journal of Materials Science, 39, 2004, pp3063-3067.

 Hala A. Hassan, J.J. Lewandowski, M.H. Abd El-latif “Effects of Changes in Test Temperature on Fatigue Crack Propagation of “Al 6090/SiCp-Al 6013” Laminated Metal Composites”, Metallurgical and Materials Transactions A, 35A, 2004, pp2293-2305.

 Hala A. Hassan, J.J. Lewandowski, M.H. Abd El-latif, “Effects of Lamination and Changes in Layer Thickness on Fatigue Crack Propagation of Light Weight Laminated Metal Composites (LMCs)”, Metallurgical and Materials Transactions A, 35A, 2004, pp 45-52.

Publications

  1. Hassan, H.A., Lewandowski, J.J., " Fracture toughness and fatigue of particulate metal matrix composites ", Comprehensive Composite Materials II, 2018
  2. Hassan, H.A., Hellier, A.K., Crosky, A.G., Lewandowski, J.J., " Fracture toughness of cast and extruded Al6061/15%Al<inf>2</inf>O<inf>3</inf>p metal matrix composites ", Australian Journal of Mechanical Engineering, 2018
  3. Hassan, H.A., Lewandowski, J.J., " Effects of particulate volume fraction on cyclic stress response and fatigue life of AZ91D magnesium alloy metal matrix composites ", Materials Science and Engineering A, 2014
  4. Hassan, H.A., Lewandowski, J.J., " Effects of mixed mode loading on the fracture toughness of bulk metallic glass/W composites ", Materials Science and Engineering A, 2013
  5. Hassan, H.A., El-Shabasy, A.B., Lewandowski, J.J., " The effect of mixed mode I/II on the fracture toughness and fracture behavior of nano-structured metal matrix composites ", Materials Science and Engineering A, 2013
  6. El-Shabasy, A.B., Hassan, H.A., Lewandowski, J.J., " Effects of composition changes on strength, bend ductility, toughness, and flex-bending fatigue of iron-based metallic glass ribbons ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2012
  7. El-Shabasy, A.B., Hassan, H.A., Lewandowski, J.J., " Effects of load ratio, R, and test temperature on high cycle fatigue behavior of nano-structured Al-4Y-4Ni-X alloy composites ", Materials Science and Engineering A, 2012
  8. Hassan, H.A., El-Shabasy, A.B., Lewandowski, J.J., " The effects of changes in test temperature and loading conditions on fracture toughness of a β toughened Zr-based bulk metallic glass composite ", Materials Science and Engineering A, 2012
  9. Hassan, H.A., " Effect of mixed mode I/II on fracture behaviour of laminated metal matrix composites ", Materials Science and Technology, 2011
  10. El-Shabasy, A.B., Hassan, H.A., Liu, Y., Li, D., Lewandowski, J.J., " High cycle fatigue behavior of a nanostructured composite produced via extrusion of amorphous Al<inf>89</inf>Gd<inf>7</inf>Ni<inf>3</inf>Fe<inf>1</inf> alloy powders ", Materials Science and Engineering A, 2009
  11. Hassan, H.A., Lewandowski, J.J., " Laminated nanostructure composites with improved bend ductility and toughness ", Scripta Materialia, 2009
  12. Hassan, H.A., El-Shabasy, A.B., Lewandowski, J.J., " Putting the heat on nano-composite aluminium alloys ", Metal Powder Report, 2009
  13. Hassan, H.A., Lewandowski, John.J., " Effects of Changes in Notch Radius and Test Temperature on the Toughness of a Nano-crystalline Aluminum Alloy Composite Produced via Extrusion of Amorphous Aluminum Alloy Powders ", Materials Science and Engineering A, 2008
  14. Hassan, H.A., Kecskes, L., Lewandowski, J.J., " Effects of changes in test temperature and loading conditions on fracture toughness of a Zr-based bulk metallic glass ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2008
  15. Vormelker, A., Hassan, H.A., Kecskes, L., Lewandowski, J.J., " Effects of changes in test temperature on fracture toughness of bulk metallic glass/w composites ", Proceedings of the 7th International Conference on Tungsten, Refractory and Hardmaterials, 2008
  16. Hassan, H.A., El-Shabasy, A.B., Lewandowski, J.J., " Fracture and fatigue crack growth of nano-composite aluminum alloys ", Advances in Powder Metallurgy and Particulate Materials - 2008, Proceedings of the 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008, 2008
  17. Osman, T.M., Hassan, H.A., Lewandowski, J.J., " Interface effects on the quasi-static and impact toughness of discontinuously reinforced aluminum laminates ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2008
  18. Hassan, H.A., Lewandowski, J.J., " Summary of interface effects on fracture and fatigue of laminated aluminum composites ", TMS Annual Meeting, 2008
  19. Hassan, H.A., Lewandowski, J.J., " Effects of high temperature and thermal exposure on fatigue crack propagation of laminated metal composites ", Materials Science and Technology, 2007
  20. Hassan, H.A., Lewandowski, J.J., Abd El-Latif, M.H., " Effects of Lamination and Changes in Layer Thickness on Fatigue-Crack Propagation of Lightweight Laminated Metal Composites ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2004
  21. Hassan, H.A., Lewandowski, J.J., Abd El-Latif, M.H., " Effects of changes in temperature on fatigue crack growth of adhesively bonded Al 2080/SiC/20p-2080 Al laminated composites ", Journal of Materials Science, 2004
  22. Hassan, H.A., Lewandowski, J.J., El-Latif, M.H.A., " Effects of changes in test temperature on fatigue crack propagation of Al6090/SiCp-Al 6013 laminated metal composites ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2004
  23. Tolulope Akinkunmi Adewole, Hala A. Hassan, Oluyemi Ojo Daramola , Bahi Bakeer, " Effect of chemical treatment on the tensile, and morphological properties of date palm/bagasse and hybrid reinforced polyester matrix composites ", Scientific African, 2025

Research Projects

A Study on the low cycle fatigue behavior of Mg Composites and nano- crystalline Mg alloy”, U.S. - EGYPT Joint Science & Technology Board, Junior Scientist Development Visits, 2013.
* Processing and Mechanical Properties of Amorphous Metal Foil and Laminates
U.S.-Egypt Science & Technology Joint Fund (junior researcher), 2010-2013.
* “Fracture and Fatigue of Nanostructured Aluminum Composites”, Fulbright Association AY2007/2008.