Emam Abdel Motelleb Soliman

Emeritus Professor at Structural Engineering

Career Information

Academic Information

Awards

Egyptian State Award For young Engineer Researchers, 2003

Books

Design of Steel Bridges
Elastic Stability of Frames

Publications

1-Emam Soliman, " Three Dimensional Analysis For The Advancing Tunnelling Face", International Symposium On Current Experiences in Tunnelling, Ministry of Transport, National Authority For Tunnels, Cairo, Egypt, January 27-28, 1992.
2-Emam Soliman, H. Duddeck and H. Ahrens, " Two and Three-Dimensional Analysis of Closely Spaced Double Tube Tunnels ", International Colloquium on Structural Engineering, Ain Shams University, Cairo, Egypt, April 14-16, 1992.
3-Emam Soliman, H. Duddeck and H. Ahrens, " Two and Three-Dimensional Analysis of Closely Spaced Double Tube Tunnels", Tunnelling and Underground Space Technology, Vol. 8, No. 1,pp.13-18, 1993.
4-Emam Soliman and Amr Darrag, "Analysis and Interpretation of the Geotechnical Measurements for Tunnels in South Turkey", International Congress On Tunnelling and Ground Conditions, International Tunnelling Ass., National Authority For Tunnels& Egyptian Tunnelling Society, Cairo, Egypt, 1994.
5-Emam Soliman, H. Duddeck and H. Ahrens, "Effect of Development of Shotcrete Stiffness On Stresses and Displacements Of Single And Double Tunnels" International Tunnelling Ass., National Authority For Tunnels& Egyptian Tunnelling Society, Cairo, Egypt, 1994.
6-Emam Soliman, " Lateral Buckling of Compression Flange of The Pony-Type Steel Plate-Girder Bridges", Seventh International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, 1996.
7-Emam Soliman, " Local Elastic Stability of Thin Walled Steel Plate- Girder Bridges", Seventh International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, 1996.
8-Emam Soliman, " Lateral Stability of Unbraced Compressed Chord of Steel Truss Bridges", Seventh International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, 1996.
9-Emam Soliman, " Effect Of High Temperature on Steel Structures", Seventh International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, 1996.
10- Emam Soliman, " Nonlinear Analyses of Shield Driven Tunnels Considering Hyperbolic Stress-Strain Relationship of Soil", The Eighth Arab Structural Engineering Conference, Cairo University, Cairo, Egypt, October 21-23, 2000.
11- Emam Soliman, " Lateral Buckling of Braced Compressed Chord of Through Steel Truss Bridges ", Ninth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, April 10-12, 2001.
12- Emam Soliman, " Development of Tunnel Construction Methods ", Ninth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, April 10-12, 2001.
13- Emam Soliman, " Development of the Structural Design and Analysis Methods of Tunnels ", Ninth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, April 10- 12, 2001.
14- Emam Soliman, "Linear and Non-linear Two-Dimensional Analyses of Single Lap Welded Joints" Third Middel East Regional Conference on Civil Engineering Technology, ESCE-EGS, Cairo, Egypt, April 8-10, 2002.
15- Emam Soliman, " Design of Unprotected Pin-Ended Steel Beam-Columns in Fire Conditions", Scientific Bulletin, Faculty of Engineering, Ain Shams University, June 2002.
16- Emam Soliman, " Lateral-Torsional Buckling of Steel Beams at Elevated Temperatures", Tenth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, April 22- 24, 2003.
17- Emam Soliman, " Inelastic Strength of Hollow Circular Section Welded Joints", Tenth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, April 22-24, 2003.
18- Emam Soliman, " Effect of Rafter Lateral Braces on Elastic and Inelastic Capacity of Steel Frames", Tenth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, April 22-24, 2003.
19- Emam Soliman, Adel H. Salem, Sherief A. Ibrahim, and Khaled Farouk “Strength of Hollow Section T-Joints Under Bending Moments” Twelfth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, December 10-12, 2007.
20- Emam Soliman, Ahmed Hassan, and Mohammed Saeed “Ultimate Strength of Uniplaner Circular Hollow Section Joints Subjected To Axial And Inplane Bending Moments” Thirteenth International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, December 27-29, 2009.
21- Emam Soliman, Iskandar, M.S., Shaat, A.A., Sayed-Ahmed, E.Y., “Experimental Investigation into Circular Hollow Section T-Joints Strengthened Using Through-Bolts. Proceedings, 14th International Colloquium on Structural and Geotechnical Engineering, Ain Shams University, Cairo, Egypt, 20-22 Dec. 2015.
22- Emam Soliman, Iskander, M.S., Shaat, A.A., Sayed-Ahmed, E.Y., “Strengthening CHS T-Joints Subjected to Brace Axial Compression Using Through-Bolts”. Journal of Constructional Steel Research, Elsevier, 128: pp. 555-566, Jan. 2017.
23- Emam Soliman, Emara, M.A., Sayed-Ahmed, E.Y., “Numerical Analysis of CHS Unstiffened Bolted Circular Flange Connection. Civil Engineering Research Magazine (CERM) Al-Azhar University, 2018.
24- Emam Soliman, Iskander, G., Sayed-Ahmed, E.Y., “ Numerical Analysis of Combined-section Steel Columns. Civil Engineering Research Magazine (CERM) Al-Azhar University, April 2018.
25- Emam Soliman, Iskander, G., Sayed-Ahmed, E.Y., “Numerical Analysis of Combined-section Steel Columns. Proceedings, the Second European and Mediterranean Structural Engineering and Construction Conference EURO-MED-SEC-2, Beirut, Lebanon, July 23-28, 2018.