ايمان محمد احمد طه

أستاذ في التصميم وهندسة الإنتاج

المعلومات المهنية

المعلومات الدراسية

المقالات والدوريات

الأبحاث

1. Sara Nester, Dieter Meinhard, Jochen Schanz, Markus Rettenberger, Iman Taha, Harald Riegel, Volker Knoblauch, " Joining of Aluminum and CFRP via Laser Powder Bed Fusion: Influence of Experimental Set-Up and Laser Processing on Microstructure and Mechanical Properties ", Polymers, 2023
2. Nira Zoesmar, Daryl Fuchs, Iman Taha, " Treatment of additively manufactured AlSi10Mg surfaces for improved bonding with fiber reinforced composites for sandwich applications ", Journal of Sandwich Structures & Materials, 2022
3. Daniel Günther, Patricia Erhard, Simon Schwab, Iman Taha, " 3D Printed Sand Tools for Thermoforming Applications of Carbon Fiber Reinforced Composites—A Perspective ", Materials, 2021
4. Saleh, M.A., Taha, I., Ebeid, S.J., " Correlation of injection moulding parameters with mechanical and morphological aspects of natural fibre reinforced thermoplastics: Korrelation von Spritzgießparametern mit mechanischen und morphologischen Aspekten von naturfaserverstärkten Thermoplasten ", Materialwissenschaft und Werkstofftechnik, 2018
5. Michael Dawoud, Iman Taha, Samy J. Ebeid, " Strain sensing behaviour of 3D printed carbon black filled ABS ", Journal of Manufacturing Processes, 2018
6. Ramadan, N., Taha, I., Hammouda, R., Abdellatif, M.H., " Behaviour of hybrid SiC/jute epoxy composites manufactured by vacuum assisted resin infusion ", Polymers and Polymer Composites, 2017
7. Streitferdt, A., Rudolph, N., Taha, I., " Co-Curing of CFRP-Steel Hybrid Joints Using the Vacuum Assisted Resin Infusion Process ", Applied Composite Materials, 2017
8. Agwa, M.A., Taha, I., Megahed, M., " Experimental and analytical investigation of water diffusion process in nano-carbon/alumina/silica filled epoxy nanocomposites ", International Journal of Mechanics and Materials in Design, 2017
9. Akram, M., Taha, I., Ghobashy, M.M., " In-situ pyrolysis: A novel technique for the dispersion of carbon particles in thermoplastics ", Journal of Reinforced Plastics and Composites, 2017
10. Akram, M., Taha, I., Ghobashy, M.M., " Low temperature pyrolysis of carboxymethylcellulose ", Cellulose, 2016
11. Bakeer, B., Taha, I., El-Mously, H., " Mechanical Behaviour of Sorghum Stalk Rind Reinforced Maleic Anhydride Grafted Polyethylene under Different Environmental Conditions ", Polymers and Polymer Composites, 2016
12. Dawoud, Michael, Taha, Iman, Ebeid, Samy J., " Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques ", Journal of Manufacturing Processes, 2016
13. Akram, M., Taha, I., Ghobashy, M.M., " Potential of carbon particle reinforced polypropylene formed in-situ through the pyrolysis of carboxymethylcellulose ", Composites Communications, 2016
14. Taha, I., Elkafafy, M.S., El Mously, H., " Potential of utilizing tomato stalk as raw material for particleboards ", Ain Shams Engineering Journal, 2016
15. Chaloupka, A., Bezerra, R., Madaksira, V., Taha, I., Rudolph, N.M., " Detection and modelling of thermal and rheological transitions of a 2-step-curing thermoset using dielectric and standard measuring techniques ", ICCM International Conferences on Composite Materials, 2015
16. Dawoud, M., Taha, I., Ebeid, S.J., " Effect of processing parameters and graphite content on the tribological behaviour of 3D printed acrylonitrile butadiene styrene ", Materialwissenschaft und Werkstofftechnik, 2015
17. Chaloupka, A., Wedel, A., Taha, I., Rudolph, N., Drechsler, K., " Phase change detection in neat and fiber reinforced polyamide 6 using dielectric analysis ", Materials Science Forum, 2015
18. El-Henawy, S.I., Mohamed, M.W.N., Mashaly, I.A., Mohamed, O.N., Galal, O., Taha, I., Nassar, K., Safwat, A.M.E., " Illumination of dense urban areas by light redirecting panels ", Optics Express, 2014
19. Mohamed, M.W.N., Mashaly, I.A., Mohamed, O.N., El-Henawy, S.I., Galal, O., Taha, I., Nassar, K., Safwat, A.M.E., " Light redirecting system using sine-wave based panels for dense urban areas ", Proceedings of SPIE - The International Society for Optical Engineering, 2014
20. El-Sabbagh, A., Taha, I., " Characterization of the draping behavior of jute woven fabrics for applications of natural-fiber/epoxy composites ", Journal of Applied Polymer Science, 2013
21. Taha, I., Abdin, Y., Ebeid, S., " Comparison of picture frame and Bias-Extension tests for the characterization of shear behaviour in natural fibre woven fabrics ", Fibers and Polymers, 2013
22. Abdin, Y., Taha, I., El-Sabbagh, A., Ebeid, S., " Description of draping behaviour of woven fabrics over single curvatures by image processing and simulation techniques ", Composites Part B: Engineering, 2013
23. Bakeer, B., Taha, I., El-Mously, H., Shehata, S.A., " On the characterisation of structure and properties of sorghum stalks ", Ain Shams Engineering Journal, 2013
24. Taha, I., Abdin, Y., Ebeid, S., " Analysis of the draping behaviour of multi-layer textiles using digital image processing ", , 2012
25. Taha, I., " Investigation of flax fibre reinforced epoxy friction composites ", Materialwissenschaft und Werkstofftechnik, 2012
26. Bassyouni, M., Taha, I., Abdel-Hamid, S.M.-S., Steuernagel, L., " Physico-mechanical properties of chemically treated polypropylene rice straw bio-composites ", Journal of Reinforced Plastics and Composites, 2012
27. , " Prediction of Draping Behaviour of Woven Fabrics over Double-Curvature Moulds using Finite Element Techniques ", International Journal on Materials and Mechanic Engineering, 2012
28. Taha, I., Abdin, Y.F., " Modeling of strength and stiffness of short randomly oriented glass fiber-polypropylene composites ", Journal of Composite Materials, 2011
29. El-Sabbagh, A., Taha, I., Taha, R., " Prediction of the modulus of elasticity of short fibre reinforced polymer composites by finite element modelling ", , 2011
30. Taha, I.M., Ziegmann, G., " Potential of sisal reinforced biodegradable polylactic acid and polyvinyl alcohol composites ", Key Engineering Materials, 2010
31. Taha, M.A., El-Sabbagh, A.M., Taha, I.M., " Trends in Composite Materials and their Design: Preface ", , 2010
32. Kamal, A.M., Taha, I., " Vibration damping behavior of fiber reinforced composites: A review ", Key Engineering Materials, 2010
33. Taha, I., El-Sabbagh, A., Ziegmann, G., " Modelling of strength and stiffness behaviour of natural fibre reinforced polypropylene composites ", , 2008
34. Taha, I., Steuernagel, L., Ziegmann, G., " Optimization of the alkali treatment process of date palm fibres for polymeric composites ", Composite Interfaces, 2007
35. Taha, I., Ziegmann, G., " A comparison of mechanical properties of natural fiber filled biodegradable and polyolefin polymers ", Journal of Composite Materials, 2006
36. Taha, I., Steuernagel, L., Ziegmann, G., " Chemical modification of date palm mesh fibres for reinforcement of polymeric materials. Part I: Examination of different cleaning methods ", Polymers and Polymer Composites, 2006
37. Taha, I., Abdellatif, M.H., Dietz, P., " Infiltration and coating of rapid prototyping parts ", Advanced Engineering Materials, 2005
38. Natalie Basedow, Kathrin Hadasch, Michael Dawoud, Cecilia Colloseus, Iman Taha, Doris Aschenbrenner, " Open Data Sources for Post-Consumer Plastic Sorting: What We Have and What We Still Need ", Procedia CIRP, 2024
39. Teresa Werner, Iman Taha, Doris Aschenbrenner, " An overview of polymer identification techniques in recycling plants with focus on current and future challenges ", Procedia CIRP, 2023
40. Frick, A., Ernst, C., Taha, I., " Einfluss einer praxisüblichen Härtetoleranz auf die thermo-mechanischen und schwingungsisolierenden Eigenschaften eines Acrylnitril-Butadien-ElastomersInfluence of a commonly accepted hardness tolerance on the thermo-mechanical and vibration-insulating pro ", Materialwissenschaft und Werkstofftechnik, 2023
41. Erhard, Patricia, Taha, Iman, Gunther, Daniel, " Influence of the Resin System and Sand Type on the Infiltration of 3D-Printed Sand Tools ", Materials, 2023
42. Aschenbrenner, D., Gros, J., Fangerow, N., Werner, T., Colloseus, C., Taha, I., " Recyclebot - Using Robots for Sustainable Plastic Recycling ", Procedia CIRP, 2023
43. Zoesmar, Nira, Birkle, Lena, Fuchs, Daryl, Warnck, Moritz, Wendel, Michael, Kuhn, Marcus, Taha, Iman, " Carbon and Silane-based Coatings for Improved Bonding in Hybrid Metal-Composite Applications ", Chemie-Ingenieur-Technik, 2022
44. Warnck, M., Binder, M., Edelmann, G., Fruchtl, M., Taha, I., " Condition monitoring of multi-material lightweight components through a sensitive outer skin using Fiber-Bragg-Grating sensors ", Procedia CIRP, 2022
45. Tamez, Manuel B. Arrillaga, Taha, Iman, " A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration ", Additive Manufacturing, 2021
46. Huayamares, Sebastian, Grund, Dominik, Taha, Iman, " Comparison between 3-point bending and torsion methods for determining the viscoelastic properties of fiber-reinforced epoxy ", Polymer Testing, 2020
47. Grund, Dominik, Orlishausen, Manuel, Taha, Iman, " Determination of fiber volume fraction of carbon fiber-reinforced polymer using thermogravimetric methods ", Polymer Testing, 2019
48. Chaloupka, Alexander, Bezerra, Renato, Madaksira, Vinay, Taha, Iman, Rudolph, Natalie M., " DETECTION AND MODELLING OF THERMAL AND RHEOLOGICAL TRANSITIONS OF A 2-STEP-CURING THERMOSET USING DIELECTRIC AND STANDARD MEASURING TECHNIQUES ", International Conference on Composite Materials, 2015
49. Bakeer, B., Taha, I., El-Mously, H., Shehata, S.A., " On the characterisation of structure and properties of sorghum stalks ", Ain Shams Engineering Journal, 2013
50. Taha, I., Abdin, Y., Ebeid, S., " Analysis of the Draping Behaviour of Multi-Layer Textiles using Digital Image Processing ", Polymers and Polymer Composites, 2012
51. El-Sabbagh, A., Taha, I., Taha, R., " Prediction of the Modulus of Elasticity of Short Fibre Reinforced Polymer Composites by Finite Element Modelling ", Polymers and Polymer Composites, 2011
52. Taha, Mohamed A., El-Sabbagh, Ahmed M., Taha, Iman M., " Trends in Composite Materials and their Design Preface ", Key Engineering Materials, 2010
53. Taha, I., El-Sabbagh, A., Ziegmann, G., " Modelling of strength and stiffness behaviour of natural fibre reinforced polypropylene composites ", Polymers and Polymer Composites, 2008
54. Taha, I, Steuernagel, L., Ziegmann, G., " Chemical modification of date palm mesh fibres for reinforcement of polymeric materials. Part 1: Examination of different cleaning methods ", Polymers and Polymer Composites, 2006