قداح شاكر محمد ابراهيم قداح الملف الشخصى

قداح شاكر محمد ابراهيم قداح

أستاذ متفرغ في هندسة القوى الميكانيكية

المعلومات المهنية

المعلومات الدراسية

نبذة مختصرة

EMPLOYMENT HISTORY :
Assistant Lecturer, Mechanical Engineering Department , Faculty of
Engineering, Ain Shams University, 1961-1963 , Egypt.
British Council Scholarship, Cranfield Institute of Technology, 1963-1964, England.
Ph.D. Research Grant University of Manchester Institute of Science and Technology, 1964-1967, England.
Lecturer, Mechanical Engineering Department, Faculty of Engineering, Ain Shams University , 1967-1973, Egypt.
Assistant professor, Energy and Automotive Engineering Department, Faculty of Engineering, Ain Shams University.
Assistant Professor, University of Technology, Mechanical Engineering Department, 1976-1980, Baghdad, Iraq.
Professor of Turbomachinery, Energy and Automotive Engineering Department, Faculty of Engineering, Ain Shams University Since, 1981 , Egypt.
Head of Pumping Group, EARDC., Faculty of Engineering, Ain Shams University, 1984- 1993, Egypt.
Director, Energy and Automotive Research and Development Centre (EARDC),Faculty of Engineering, Ain Shams University, 1984- 1993, Egypt.
Head, Mechanical Engineering Technology Department, Yanbu Industrial College, Royal Commission for Jubail and Yanbu, 1993-1995, Saudi Arabia.
Head, Mechanical Power Engineering Department, Faculty of Engineering, Ain Shams University, Since 1996-2000 Egypt.
Director, Mechanical Power Engineering Consultation Unit. 1998-2000.
Emeritus professor of Turbomachinery, Mechanical power Engineering Department, Faculty of Engineering, Ain Shams University, 2000
Project Manager, Small Enterprise Development project, Faculty of Engineering, Ain Shams University 1998 – 2005.
Dean, Canadian International College, New Cairo, Egypt 2006/2008.
Emeritus professor, Mechanical power Engineering Department 2000-now.

الكتب

PUBLISHED BOOKS
K.Sh. Kaddah and H.A.El-Aziz Heat Transfer, University of Technology, Baghdad Iraq,1978.
K.Sh. Kaddah and H. Awbi, Power Stations, University of Technology, Baghdad, Iraq, 1979.
K.Sh. Kaddah and H.E. Nour, Steam Engineering laboratory, University of Technology, Baghdad, Iraq, 1979.
K.Sh. Kaddah and H.A.El-Aziz, Heat transfer Laboratory, University of Technology Baghdad, 1980 .
K.Sh.Kaddah ,Basic units ,Notations ,Symbols and Coefficients used in Thermal Engineering ,University of Technology Baghdad ,1979 .
K.Sh.Kaddah and A.El-Sibaie, Arabic Version of ,Fluid Mechanics with Engineering Applications by R.L. Daugherty and J.B.Franzini,S.I edition ,Mc-GrawHill Co.,AI Ahram Press .1982
K.Sh. Kaddah,.Jose Perez, Hydro, Wave and Tidal Power,CERES project, TEMPUS, 2013.

المقالات والدوريات

ENGINEERING & SCIENTIFIC ACTIVITIES
Member of Canfield Society, 1964 - 1970, England.
Member of Japan Society of Mechanical Engineering, 1968-1976, Japan.
G. Member of Institution of Mechanical Engineering, 1976-1990, England.
Member of Egyptian Society of Mechanical Engineering since 1980, Egypt.
Member of scientific permanent committee for Heat/Hydraulic machines
Automotives and Flight Engineering 1986-2008.
Consultant Engineer in the field of Water and Waste Water Distribution and professors Treatment works - No. 627/3,1991, the Egyptian Syndicate.
Member of Environment Committee, Faculty of Engineering, A S U, 1998
Member of Egyptian Committee of World Energy Council 1996-2000.
Member of committee for International Federation of Measurement and Control of Granular Materials, China, 1997.Chairman of Youth National committee .
Chairman of Youth National Committee of World Energy Council since 2001- now.
Member of Fluid Machines Committee, Egyptian Organization Standards since 2002- now.
Principal investigator of research project titled "Electricity Generation from Sea Wave Energy", supported by Ain Shams University Research .Department, 2011 – 2014 .
Member of Organizing and Scientific Committee, Eleventh International Conference of Fluid Dynamics, Alexandria, 19-21 December.2018

الأبحاث

PUBLISHED PAPERS
K.Sh. Kaddah and D Woollatt, Steady flow through non-return disc valves. Thermodynamics and Fluid Mechanics Convention, I.M.E., Paper25, Bristol, England, 1968.
K. Sh Kaddah and D. Woollatt, Unsteady Compressible. flow through non-return disc valves . Fluids Engineering, Heat Trensfer and lubrication Conference, A.S.M.E., Detroit, U.S.A., 1970.
K.Sh. Kaddah, A.A.Rizk and M.I. Salem, Pressure lasses in pipe bends. Faculty of engineering Scientific Bulletin,No 7, Ain Shams University, 1972.
K.Sh. Kaddah, A Study of Fuel injection Systems for Diesel Engines. Armed Forces Technical Bulletin, Egypt, 1973.
K.Sh. Kaddah, Unsteady flow method of characteristics, Armed Forces Technical Bulletin, Egypt, 1973.
K.Sh. Kaddah, The role of exhaust pipe in the scavenging of the Ramsis 50 Scooter two stroke Petrol Engine. Egyptian Society of Mechanical Engineers Mechanical Power Engineering, Cairo , Egypt, 1978.
K.sh. Kaddah et al. A Comparative Study of Fuel Injection Systems of Diesel Engines. Egyptian Society of Mechanical Engineers Magazine, Egypt, 1974.
K.Sh. Kaddah and E.R. Norster, Discharge Coefficient and Jet Deflection for holes of parallel flow. Scientific Journal Vol 1, Number 2, England,1977.
K.Sh. Kaddah. An Introduction to the Pulse Jet Engine principle and practice. Egyptian Society of Mechanical Engineers Magazine, Vol.22,No.3, Egypt, 1977.
K.Sh. Kaddah et Al, A comparative study for the methods of measuring rate of fuel injection in Diesel Engines. Second International conference of echanical Power Engineering, 1978.
K.Sh. Kaddah et Al, The effect of delivery valve wear on the injection rate of fuel injection in Diesel Engines, Second international Conference of Mechanical Power Engineering, Cairo, Egypt, 1978.
K.Sh. Kaddah, A.A.Rizk, G.W. Younan, Jet discharge Coefficient through openings for parallel flow. 4th International Symposium on Air Breathing Engines, Florida, U.S.A., 1979
K.Sh.Kaddah Et Al, Basic investigations of Fuel Injection Systems in Diesel Engines. Egyptian Society of Mechanical engineers Magazine, Egypt, 1980.
K.Sh. Kaddah and M.A.Hameed, Volume effect of Air vessels on Water Hammer phenomenon. Faculty of Engineering Scientific Bulletin, Ain Shams University,Egypt, 1980.
K.Sh. Kaddah,Some further investigations of Water Hammer Phenomenon in Pipelines. Faculty of Engineering Scientific Bulletin, Ain Shams University, Egypt, 1980.
K.Sh.Kaddah, Parameters affecting Water Hammer Phenomenon in pipelines of Hydraulic pumping and Power Stations. Faculty of Engineering Scientific Bulletin, Ain Shams University , Number 12,Egypt 1981
K.Sh.Kaddah,et Al, Inertia Pressure Waves Due to Transient Flow In Pipelines and possible methods of Protection. Faculty of Engineering Scientific Bulletin, Number18, Egypt 1986.
K.Sh. Kaddah and S.M. EL.Haggar, Metering two – Phase Slurry Flow. Faculty of Engineering Scientific Bulletin ,Ain Shams University Number 22,Egypt 1988.
K.Sh. Kaddah et Al, Performance of a Roof Ventilator used as a Wind Turbine. 1st International Symposium on Renewable Energy Sources, Egypt, 1988.
K.Sh. Kaddah, Experimental and Numerical analysis of Two-phase Slurry flow through a venturimeter. 4th International Conference of Mechanical Engineering and Technology, Egypt, 1989.
K.Sh. Kaddah, A.M. El-Sibaie, N. Abdel-Aziz and A. Sadek, The influence of Air Water Flow mixtures on the performance of axial flow pumps. 3rd International Congress of Fluid Mechanics, Mansoura University, Egypt, 1990.
K.Sh. Kaddah, An introduction to Wave Energy Development in Egypt. 2nd International Symposium on renewable Energy Sources, Egypt,1990.
K.Sh. Kaddah et Al, Cold flow study of flow stabilizing parameters of Bluff bodies. 5th International Conference of fluid Mechanics, Egypt, 1995.
K..Sh. kaddah et Al, Sea Wave Energy and its applicabil.ity in Egypt. 5th International Conference on Energy and Environment, Egypt, 1996
K.Sh. Kaddah, Air pollution from exhaust gases. 1st International Conference on Engineering and Environment, Faculty of Engineering, Ain Shams University, Egypt, 1998.
K.Sh. Kaddah et Al, Characteristics of fan shaped Wells turbine used in Sea Wave energy converters. Faculty of Engineering Scientific Bulletin, in Shams
University, Egypt, 1998. 4/7
K.Sh. Kaddah et Al, Flow characteristics in the near Wake of tandom cones. Engineering research Journal, Faculty of Engineering Helwan University, Egypt,1998.
K.Sh. Kaddah et Al, Turbulent flow in the near wake of twin discs. Engineering Research Journal, Faculty of Engineering, Helwan University, Egypt, 1999.
K.Sh. Kaddah et Al, Performance of Horizontal axis wind turbine having flat sheet bladed rotor.. 2nd International Conference on Energy and Environment, Egypt, 2000.
K.Sh. Kaddah, Effect of Air Pollution on Global Warming. Marketing Exhibition of Ain Shams University products and services, Egypt, 2000.
K.Sh. Kaddah et Al, The usage of system analysis approach in planning the Environmental management systems. Bulletin of Environmental Sciences, Ain Shams University, Egypt, 2002.
K.Sh. Kaddah et Al, Productivity assessment of El-Nasr Pilot Solar Steam generation Plant during Commissioning Phase. 2nd International Conference on Environmental Engineering, Ain Shams University, 2008.
K.Sh. Kaddah et Al, El-Nasr Solar Steam Generation Pilot Plant Performance Simulation. 2nd International Conference on Environmental Engineering, Ain Shams University, 2008.
K.Sh. Kaddah et Al, Environmental Impact assessment of Recycled Plastic Wastes –case study Great Cairo zone, Bulletin of Environmental Sciences, Ain Shams University, Egypt, 2010.
K.Sh. Kaddah, A. Rafaat, Role of Environmental Management System in Reducing Pollution of Industrial Enterprises in Egypt, Bulletin of Environmental Sciences, Ain Shams University, Egypt , 2013.
Kaddah, Kaddah,Mahmoud Hewehy, Ali Selim and Ahmed Ramadann, The effect of environmental parameters , Ain Shams Engineering Journal, Elsevier publishers, 2019.