2018 Bylaw, Courses offered by Public Works Engineering Department
Courses offered by Public Works Engineering Department
The Public Works Engineering Department is responsible for teaching courses that serve the following programs:
- One course in Faculty Requirement.
- Several Basic Civil Engineering courses as a Civil Discipline Requirement.
- Water Engineering and Hydraulic Structures Program.
- Structural Engineering Program.
- Utilities and Infrastructure Program.
- Building Engineering Program.
- Civil Infrastructure Engineering Program.
- Architectural Engineering Program
Table 66 List of specializations at the Public Works Engineering Department.
| # | Specialization |
| 1 | Surveying and Remote Sensing |
| 2 | Transportation Planning and Traffic Engineering |
| 3 | Highways and Airport Engineering |
| 4 | Railway Engineering |
| 5 | Sanitary and Environmental Engineering |
| 9 | Graduation Project |
The following abbreviations are the legend for the courses table.
| Lvl | Level | UR | University Requirement | SA | Student Activities | ||
| CH | Credit Hour | FR | Faculty Requirement | MT | Mid-Term Exam | ||
| ECTS | European Credit Transfer System | DR | Discipline Requirement | PE | Practical Exam | ||
| SWL | Student Work Load | PR | Program Requirement | FE | Final Exam | ||
| Lec | Lectures | ||||||
| Tut | Tutorials | ||||||
| Lab | Laboratory | ||||||
| TT | Total |
Table 67 List of MCT courses.
| # | Lvl | Code | Course Title | Credits and SWL | Contact Hours | Classification | Assessment (%) | Prerequisites | ||||||||||||
| CH | ECTS | SWL | Lec | Tut | Lab | TT | UR | FR | DR | PR | SA | MT | PE | FE | ||||||
| 1. Surveying and Remote Sensing | ||||||||||||||||||||
| 1 | 0 | CEP011 | Projection and Engineering Graphics | 3 | 6 | 150 | 1 | 3 | 2 | 6 | x | 35 | 20 | 0 | 40 | |||||
| 1 | 0 | CEP011s | Projection and Engineering Graphics | 3 | 6 | 150 | 1 | 3 | 2 | 6 | x | 35 | 25 | 0 | 40 | |||||
| 1 | 1 | CEP111 | Plane Surveying (1) | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 15 | 25 | 10 | 40 | |||||
| 1 | 1 | CEP111s | Plane Surveying (1) | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 15 | 10 | 15 | 60 | |||||
| 1 | 1 | CEP112 | Plane Surveying (2) | 3 | 5 | 125 | 2 | 1 | 2 | 5 | x | 15 | 25 | 10 | 40 | ( CEP111 ) | ||||
| 1 | 1 | CEP112s | Plane Surveying (2) | 3 | 5 | 125 | 2 | 1 | 2 | 5 | x | 15 | 10 | 15 | 60 | ( CEP111s ) | ||||
| 1 | 1 | CEP113 | Surveying | 2 | 4 | 100 | 1 | 1 | 1 | 3 | x | 15 | 25 | 15 | 40 | |||||
| 1 | 1 | CEP113s | Surveying | 2 | 4 | 100 | 1 | 1 | 1 | 3 | x | 20 | 25 | 15 | 40 | |||||
| 1 | 2 | CEP211 | Topographic Surveying (1) | 2 | 5 | 125 | 2 | 1 | 1 | 4 | x | 15 | 25 | 10 | 40 | ( CEP112 ) | ||||
| 1 | 2 | CEP211s | Topographic Surveying (1) | 2 | 5 | 125 | 2 | 1 | 1 | 4 | x | 15 | 10 | 15 | 60 | ( CEP112s ) | ||||
| 1 | 2 | CEP212 | Engineering Surveying | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEP211 ) | ||||
| 1 | 2 | CEP212s | Engineering Surveying | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEP211s ) | ||||
| 1 | 2 | CEP213 | Surveying (1) | 4 | 6 | 150 | 3 | 2 | 2 | 7 | x | 20 | 20 | 15 | 40 | ( PHM013 ) | ||||
| 1 | 2 | CEP213s | Surveying (1) | 4 | 6 | 150 | 3 | 2 | 2 | 7 | x | 25 | 20 | 15 | 40 | ( PHM013s ) | ||||
| 1 | 2 | CEP214 | Surveying (2) | 4 | 6 | 150 | 2 | 3 | 2 | 7 | x | 20 | 20 | 15 | 40 | ( CEP213 ) | ||||
| 1 | 2 | CEP214s | Surveying (2) | 4 | 6 | 150 | 2 | 3 | 2 | 7 | x | 25 | 20 | 15 | 40 | ( CEP213s ) | ||||
| 1 | 3 | CEP311 | Topographic Surveying (2) | 2 | 5 | 125 | 2 | 1 | 1 | 4 | x | 15 | 25 | 10 | 40 | ( CEP211 ) | ||||
| 1 | 3 | CEP311s | Topographic Surveying (2) | 2 | 5 | 125 | 2 | 1 | 1 | 4 | x | 20 | 20 | 0 | 60 | ( CEP211s ) | ||||
| 1 | 3 | CEP312 | Surveying (3) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP214 ) | ||||
| 1 | 3 | CEP312s | Surveying (3) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP214s ) | ||||
| 1 | 3 | CEP313 | Photogrammetric Surveying | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP312 ) | ||||
| 1 | 3 | CEP313s | Photogrammetric Surveying | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP312s ) | ||||
| 1 | 3 | CEP314 | Infrastructure Network Planning | 2 | 5 | 125 | 2 | 1 | 1 | 4 | x | 30 | 25 | 0 | 40 | ( CEP312 ) | ||||
| 1 | 3 | CEP314s | Infrastructure Network Planning | 2 | 5 | 125 | 2 | 1 | 1 | 4 | x | 35 | 25 | 0 | 40 | ( CEP312s ) | ||||
| 1 | 4 | CEP411 | Geodetic Surveying | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEP212 ) AND ( CEP311 ) | ||||
| 1 | 4 | CEP411s | Geodetic Surveying | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEP212s ) AND ( CEP311s ) | ||||
| 1 | 4 | CEP412 | Hydrographic Surveying | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP311 ) | ||||
| 1 | 4 | CEP412s | Hydrographic Surveying | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP311s ) | ||||
| 1 | 4 | CEP413 | Geographic Information Systems GIS | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP311 ) | ||||
| 1 | 4 | CEP413s | Geographic Information Systems GIS | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP311s ) | ||||
| 1 | 4 | CEP414 | Surveying using Satellite | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP411 ) | ||||
| 1 | 4 | CEP414s | Surveying using Satellite | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP411s ) | ||||
| 1 | 4 | CEP415 | Geodetic and GPS Surveying | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP312 ) | ||||
| 1 | 4 | CEP415s | Geodetic and GPS Surveying | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP312s ) | ||||
| 1 | 4 | CEP416 | Hydrographic Surveying and Harbor Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP312 ) | ||||
| 1 | 4 | CEP416s | Hydrographic Surveying and Harbor Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP312s ) | ||||
| 1 | 4 | CEP417 | GIS Applications in Civil infrastructure Projects | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP312 ) | ||||
| 1 | 4 | CEP417s | GIS Applications in Civil infrastructure Projects | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP312s ) | ||||
| 2. Transportation Planning and Traffic Engineering | ||||||||||||||||||||
| 1 | 2 | CEP221 | Introduction to Transportation & Traffic Engineering | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 30 | 25 | 0 | 40 | ( PHM111 ) | ||||
| 1 | 2 | CEP221s | Introduction to Transportation & Traffic Engineering | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 35 | 25 | 0 | 40 | ( PHM111s ) | ||||
| 1 | 3 | CEP321 | Transportation Planning | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( PHM111 ) | ||||
| 1 | 3 | CEP321s | Transportation Planning | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( PHM111s ) | ||||
| 1 | 3 | CEP322 | Transportation and Roads Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( PHM111 ) | ||||
| 1 | 3 | CEP322s | Transportation and Roads Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( PHM111s ) | ||||
| 1 | 3 | CEP323 | Principles of Traffic Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP221 ) | ||||
| 1 | 3 | CEP323s | Principles of Traffic Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP221s ) | ||||
| 1 | 4 | CEP421 | Traffic Engineering | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEP321 ) | ||||
| 1 | 4 | CEP421s | Traffic Engineering | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEP321s ) | ||||
| 1 | 4 | CEP422 | Traffic Management Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP321 ) | ||||
| 1 | 4 | CEP422s | Traffic Management Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP321s ) | ||||
| 1 | 4 | CEP423 | Traffic Studies and Analysis | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP421 ) AND ( CEP321 ) | ||||
| 1 | 4 | CEP423s | Traffic Studies and Analysis | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP421s ) AND ( CEP321s ) | ||||
| 1 | 4 | CEP424 | Transportation Economics | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP221 ) | ||||
| 1 | 4 | CEP424s | Transportation Economics | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP221s ) | ||||
| 1 | 4 | CEP425 | Urban Transportation Planning | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP221 ) | ||||
| 1 | 4 | CEP425s | Urban Transportation Planning | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP221s ) | ||||
| 1 | 4 | CEP426 | Intelligent Transportation Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP221 ) | ||||
| 1 | 4 | CEP426s | Intelligent Transportation Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP221s ) | ||||
| 3. Highways and Airport Engineering | ||||||||||||||||||||
| 1 | 3 | CEP331 | Roads and Airport Engineering | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | |||||
| 1 | 3 | CEP331s | Roads and Airport Engineering | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | |||||
| 1 | 3 | CEP332 | Highway Geometric and Structural Design | 3 | 4 | 100 | 2 | 2 | 0 | 4 | x | 30 | 25 | 0 | 40 | ( CEP221 ) | ||||
| 1 | 3 | CEP332s | Highway Geometric and Structural Design | 3 | 4 | 100 | 2 | 2 | 0 | 4 | x | 35 | 25 | 0 | 40 | ( CEP221s ) | ||||
| 1 | 3 | CEP333 | Road Construction Material | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP332 ) | ||||
| 1 | 3 | CEP333s | Road Construction Material | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP332s ) | ||||
| 1 | 4 | CEP431 | Highway Construction Technology | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEP331 ) | ||||
| 1 | 4 | CEP431s | Highway Construction Technology | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEP331s ) | ||||
| 1 | 4 | CEP432 | Maintenance of Roads and Airport | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP331 ) | ||||
| 1 | 4 | CEP432s | Maintenance of Roads and Airport | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP331s ) | ||||
| 1 | 4 | CEP433 | Airport Planning and Design | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP331 ) | ||||
| 1 | 4 | CEP433s | Airport Planning and Design | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP331s ) | ||||
| 1 | 4 | CEP434 | Road Maintenance | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP332 ) | ||||
| 1 | 4 | CEP434s | Road Maintenance | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP332s ) | ||||
| 1 | 4 | CEP435 | Road Construction | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP332 ) | ||||
| 1 | 4 | CEP435s | Road Construction | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP332s ) | ||||
| 1 | 4 | CEP436 | Airport Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP332 ) | ||||
| 1 | 4 | CEP436s | Airport Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP332s ) | ||||
| 4. Railway Engineering | ||||||||||||||||||||
| 1 | 3 | CEP341 | Railway Engineering (1) | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | |||||
| 1 | 3 | CEP341s | Railway Engineering (1) | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | |||||
| 1 | 3 | CEP342 | Railway Engineering Principles | 2 | 5 | 125 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP221 ) | ||||
| 1 | 3 | CEP342s | Railway Engineering Principles | 2 | 5 | 125 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP221s ) | ||||
| 1 | 4 | CEP441 | Railway Engineering (2) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP341 ) | ||||
| 1 | 4 | CEP441s | Railway Engineering (2) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP341s ) | ||||
| 1 | 4 | CEP442 | Railway Signaling and Control System | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP441 ) | ||||
| 1 | 4 | CEP442s | Railway Signaling and Control System | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP441s ) | ||||
| 5. Sanitary and Environmental Engineering | ||||||||||||||||||||
| 1 | 1 | CEP151 | Introduction to Environmental Engineering | 2 | 3 | 75 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | |||||
| 1 | 1 | CEP151s | Introduction to Environmental Engineering | 2 | 3 | 75 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | |||||
| 1 | 2 | CEP251 | Green Building Systems and Infrastructure | 2 | 4 | 100 | 1 | 2 | 0 | 3 | x | 30 | 25 | 0 | 40 | |||||
| 1 | 2 | CEP251s | Green Building Systems and Infrastructure | 2 | 4 | 100 | 1 | 2 | 0 | 3 | x | 35 | 25 | 0 | 40 | |||||
| 1 | 3 | CEP351 | Water and wastewater Networks | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEI211 ) | ||||
| 1 | 3 | CEP351s | Water and wastewater Networks | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEI211s ) | ||||
| 1 | 3 | CEP352 | Sanitary Engineering | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEI211 ) | ||||
| 1 | 3 | CEP352s | Sanitary Engineering | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEI211s ) | ||||
| 1 | 3 | CEP353 | Design of Water and Wastewater Networks | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 30 | 25 | 0 | 40 | ( CEI111 ) | ||||
| 1 | 3 | CEP353s | Design of Water and Wastewater Networks | 3 | 6 | 150 | 2 | 2 | 0 | 4 | x | 35 | 25 | 0 | 40 | ( CEI111s ) | ||||
| 1 | 3 | CEP354 | Computer Applications in Sanitary Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP353 ) | ||||
| 1 | 3 | CEP354s | Computer Applications in Sanitary Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP353s ) | ||||
| 1 | 4 | CEP451 | Water and Wastewater Treatment | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEP351 ) AND ( PHM041 ) | ||||
| 1 | 4 | CEP451s | Water and Wastewater Treatment | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 20 | 20 | 0 | 60 | ( CEP351s ) AND ( PHM041s ) | ||||
| 1 | 4 | CEP452 | Environmental Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP351 ) | ||||
| 1 | 4 | CEP452s | Environmental Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP351s ) | ||||
| 1 | 4 | CEP453 | Sludge Management | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEP451 ) | ||||
| 1 | 4 | CEP453s | Sludge Management | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | ( CEP451s ) | ||||
| 1 | 4 | CEP454 | Solid Waste Management | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | |||||
| 1 | 4 | CEP454s | Solid Waste Management | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 20 | 20 | 0 | 60 | |||||
| 1 | 4 | CEP455 | Principles of Water and Wastewater Treatment | 2 | 6 | 150 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP353 ) | ||||
| 1 | 4 | CEP455s | Principles of Water and Wastewater Treatment | 2 | 6 | 150 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP353s ) | ||||
| 1 | 4 | CEP456 | Water and Wastewater Supply | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEP353 ) | ||||
| 1 | 4 | CEP456s | Water and Wastewater Supply | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP353s ) | ||||
| 1 | 4 | CEP457 | Reuse of Treated Wastewater | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | (CEP353 ) | ||||
| 1 | 4 | CEP457s | Reuse of Treated Wastewater | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEP353s ) | ||||
| 9. Graduation Project | ||||||||||||||||||||
| 1 | 4 | CEP491 | Utilities and Infrastructure Graduation Project | 6 | 12 | 300 | 1 | 10 | 0 | 11 | x | 15 | 25 | 10 | 40 | |||||
| 1 | 4 | CEP491s | Utilities and Infrastructure Graduation Project | 6 | 12 | 300 | 1 | 10 | 0 | 11 | x | 50 | 0 | 0 | 50 | |||||
| 1 | 4 | CEP492 | Civil Engineering Design Graduation Project (1) | 3 | 6 | 150 | 1 | 4 | 0 | 5 | x | 60 | 0 | 40 | 0 | |||||
| 1 | 4 | CEP492s | Civil Engineering Design Graduation Project (1) | 3 | 6 | 150 | 1 | 4 | 0 | 5 | x | 60 | 0 | 0 | 40 | |||||
| 1 | 4 | CEP493 | Senior Seminar | 2 | 3 | 75 | 0 | 4 | 0 | 4 | x | 55 | 0 | 0 | 40 | ( CEP492 ) | ||||
| 1 | 4 | CEP493s | Senior Seminar | 2 | 3 | 75 | 0 | 4 | 0 | 4 | x | 60 | 0 | 0 | 40 | ( CEP492s ) | ||||
| 1 | 4 | CEP494 | Civil Engineering Design Graduation Project (2) | 3 | 6 | 150 | 1 | 4 | 0 | 5 | x | 60 | 0 | 40 | 0 | ( CEP492 ) | ||||
| 1 | 4 | CEP494s | Civil Engineering Design Graduation Project (2) | 3 | 6 | 150 | 1 | 4 | 0 | 5 | x | 60 | 0 | 0 | 40 | ( CEP492s ) | ||||
| CEP011 | Projection and Engineering Graphics | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 3 Hours | 2 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to descriptive geometry, projection of points, lines, surfaces. Intersection of bodies and surfaces. Development of surfaces. The principles of steel drawing and construction. Derivation of views and sections from given views of steel constructions. Fundamentals of architectural drawings: Plans, sections, elevations, and paraline drawings. Computer aided drafting (CAD). | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Materials Engineering |
0 | 2 | |||||||||
| Manufacturing Engineering |
0 | 2 | |||||||||
| Mechatronics Engineering and Automation |
0 | 2 | |||||||||
| Landscape Architecture |
0 | 2 | |||||||||
| Environmental Architecture and Urbanism |
0 | 2 | |||||||||
| Housing Architecture and Urban Development |
0 | 2 | |||||||||
| Communication Systems Engineering |
0 | 2 | |||||||||
| Energy and Renewable Energy Engineering |
0 | 2 | |||||||||
| Computer Engineering and Software Systems |
0 | 2 | |||||||||
| Building Engineering |
0 | 2 | |||||||||
| Civil Infrastructure Engineering |
0 | 2 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 20% | 0% | 40% | ||||||||
| CEP011s | Projection and Engineering Graphics | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 3 Hours | 2 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to descriptive geometry, projection of points, lines, surfaces. Intersection of bodies and surfaces. Development of surfaces. The principles of steel drawing and construction. Derivation of views and sections from given views of steel constructions. Fundamentals of architectural drawings: Plans, sections, elevations, and paraline drawings. Computer aided drafting (CAD). | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Architectural Engineering |
1 | 2 | |||||||||
| Structural Engineering |
1 | 2 | |||||||||
| Water Engineering and Hydraulic Structures |
1 | 2 | |||||||||
| Utilities and Infrastructure |
1 | 2 | |||||||||
| Electrical Power and Machines Engineering |
1 | 2 | |||||||||
| Electronics and Communications Engineering |
1 | 2 | |||||||||
| Computer and Systems Engineering |
1 | 2 | |||||||||
| Design and Production Engineering |
1 | 2 | |||||||||
| Mechanical Power Engineering |
1 | 2 | |||||||||
| Automotive Engineering |
1 | 2 | |||||||||
| Mechatronics Engineering |
1 | 2 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP111 | Plane Surveying (1) | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to mapping and surveying science - Different surveying instruments and their uses - The surveying maps and their types - Reconnaissance and surveying sketches drawing - Scales- International coordinate systems - Different coordinate systems used in Egypt - The Theodolite - Methods of observing angles and directions - Methods of observing distances - Theory of errors - Errors in surveying measurements, sources, types and treatment. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP111s | Plane Surveying (1) | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to mapping and surveying science - Different surveying instruments and their uses - The surveying maps and their types - Reconnaissance and surveying sketches drawing - Scales- International coordinate systems - Different coordinate systems used in Egypt - The Theodolite - Methods of observing angles and directions - Methods of observing distances - Theory of errors - Errors in surveying measurements, sources, types and treatment. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| General Civil Engineering |
1 | ||||||||||
| Structural Engineering |
3 | ||||||||||
| Water Engineering and Hydraulic Structures |
3 | ||||||||||
| Utilities and Infrastructure |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 10% | 15% | 60% | ||||||||
| CEP112 | Plane Surveying (2) | 3 CH | |||||||||
| Prerequisites | ( CEP111 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 2 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Different horizontal control networks (triangulation, trilateration, hybrid) - Traverses and their specification and standards of accuracy for different projects - Control points and their fixation - Traverse observations and calculations - Detailing using traverses - Point positioning techniques - Two-dimensional coordinates transformation - Surveying maps production (hard copy and Digital Maps). | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP112s | Plane Surveying (2) | 3 CH | |||||||||
| Prerequisites | ( CEP111s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 2 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Different horizontal control networks - Traverses and their specification and standards of accuracy for different projects - Control points and their fixation - Traverse observations and calculations - Detailing using traverses - Point positioning techniques - Two-dimensional coordinates transformation - Surveying maps production (hard copy and Digital Maps). | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| General Civil Engineering |
1 | ||||||||||
| Utilities and Infrastructure |
2 | 4 | |||||||||
| General Civil Engineering |
2 | 4 | |||||||||
| Structural Engineering |
2 | 4 | |||||||||
| General Civil Engineering |
2 | 4 | |||||||||
| General Civil Engineering |
2 | 4 | |||||||||
| General Civil Engineering |
2 | 4 | |||||||||
| General Civil Engineering |
2 | 4 | |||||||||
| Water Engineering and Hydraulic Structures |
2 | 4 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 10% | 15% | 60% | ||||||||
| CEP113 | Surveying | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 1 Hour | 1 Hour | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to mapping and surveying science - Definitions and branches of surveying science and its applications - Different surveying instruments and their uses - The surveying maps and their types – Point positioning techniques - Setting out techniques - Interior and exterior survey of buildings for architectural projects and production of maps - Introduction to vertical control in surveying - Determination of the mean sea level in Egypt - Different surveying instruments used for height difference measurement - Different types of bench marks - Ordinary and precise levelling - Calculation of levelling - Applications of levelling - Grid levelling and generation of contour lines - Longitudinal profiles and cross sections. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Landscape Architecture |
1 | 4 | |||||||||
| Environmental Architecture and Urbanism |
1 | 4 | |||||||||
| Housing Architecture and Urban Development |
1 | 4 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 15% | 40% | ||||||||
| CEP113s | Surveying | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 1 Hour | 1 Hour | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to mapping and surveying science - Definitions and branches of surveying science and its applications - Different surveying instruments and their uses - The surveying maps and their types – Point positioning techniques - Setting out techniques - Interior and exterior survey of buildings for architectural projects and production of maps - Introduction to vertical control in surveying - Determination of the mean sea level in Egypt - Different surveying instruments used for height difference measurement - Different types of bench marks - Ordinary and precise levelling - Calculation of levelling - Applications of levelling - Grid levelling and generation of contour lines - Longitudinal profiles and cross sections. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Architectural Engineering |
1 | 4 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 25% | 15% | 40% | ||||||||
| CEP211 | Topographic Surveying (1) | 2 CH | |||||||||
| Prerequisites | ( CEP112 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Introduction to vertical control in surveying - Determination of the mean sea level in Egypt - Different surveying instruments used for height difference measurement - Different types of bench marks - Ordinary and precise levelling - Calculation of levelling –Indirect methods for height differences determination-Applications of levelling - Grid levelling and generation of contour lines - Longitudinal profiles and cross sections - Computation of volumes of earth works. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP211s | Topographic Surveying (1) | 2 CH | |||||||||
| Prerequisites | ( CEP112s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Introduction to vertical control in surveying - Determination of the mean sea level in Egypt - Different surveying instruments used for height difference measurement - Different types of bench marks - Ordinary and precise levelling - Calculation of levelling –Indirect methods for height differences determination-Applications of levelling - Grid levelling and generation of contour lines - Longitudinal profiles and cross sections - Computation of volumes of earth works. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| General Civil Engineering |
2 | ||||||||||
| Structural Engineering |
5 | ||||||||||
| Water Engineering and Hydraulic Structures |
5 | ||||||||||
| Utilities and Infrastructure |
5 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 10% | 15% | 60% | ||||||||
| CEP212 | Engineering Surveying | 3 CH | |||||||||
| Prerequisites | ( CEP211 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| The use of total stations in surveying mapping- The role of surveying in construction of different projects such as (Roads, Tunnels- pipeline, ...) - Surveying setting out using different surveying instruments - Deformation monitoring techniques - Surveying reports for different engineering projects - Introduction to GPS – Introduction to GIS. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP212s | Engineering Surveying | 3 CH | |||||||||
| Prerequisites | ( CEP211s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| The use of total stations in surveying mapping- The role of surveying in construction of different projects such as (Roads, Tunnels- pipeline, ...) - Surveying setting out using different surveying instruments - Deformation monitoring techniques - Surveying reports for different engineering projects - Introduction to GPS – Introduction to GIS. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
2 | 6 | |||||||||
| Water Engineering and Hydraulic Structures |
2 | 6 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP213 | Surveying (1) | 4 CH | |||||||||
| Prerequisites | ( PHM013 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 3 Hours | 2 Hours | 2 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to surveying science: Historical background, definitions and branches of surveying science. Introduction to national and international mapping system, linear measurements, electronic distance measurements, angular measurements, computation of coordinates, traverse (measurements, calculations, adjustments and drawing), coordinate calculations, two dimensional coordinate transformation, area calculations (regular and irregular parcel shapes) by using analytical, mechanical and graphical methods, parcel division techniques, kinds and types of errors in surveying measurement, introduction to theory of errors. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Building Engineering |
2 | 5 | |||||||||
| Civil Infrastructure Engineering |
2 | 5 | |||||||||
| Civil Infrastructure Engineering |
1 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 15% | 40% | ||||||||
| CEP213s | Surveying (1) | 4 CH | |||||||||
| Prerequisites | ( PHM013s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 3 Hours | 2 Hours | 2 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to surveying science: Historical background, definitions and branches of surveying science. Introduction to national and international mapping system, linear measurements, electronic distance measurements, angular measurements, computation of coordinates, traverse (measurements, calculations, adjustments and drawing), coordinate calculations, two dimensional coordinate transformation, area calculations (regular and irregular parcel shapes) by using analytical, mechanical and graphical methods, parcel division techniques, kinds and types of errors in surveying measurement, introduction to theory of errors. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 25% | 20% | 15% | 40% | ||||||||
| CEP214 | Surveying (2) | 4 CH | |||||||||
| Prerequisites | ( CEP213 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 3 Hours | 2 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to vertical control, different methods for height difference determination, ordinary levelling, survey level and survey staff, Calculation of ordinary levelling, Precise level, Calculations of precise levelling, Indirect methods for height difference determination, Tachometry, Trigonometric levelling, Earth curvature and refraction and their effects on height differences, applications of levelling, longitudinal levelling, cross section levelling, grid levelling, contour lines, topographic maps, volume computations and earth work. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Building Engineering |
2 | 6 | |||||||||
| Civil Infrastructure Engineering |
2 | 6 | |||||||||
| Building Engineering |
1 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 15% | 40% | ||||||||
| CEP214s | Surveying (2) | 4 CH | |||||||||
| Prerequisites | ( CEP213s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 3 Hours | 2 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to vertical control, different methods for height difference determination, ordinary levelling, survey level and survey staff, Calculation of ordinary levelling, Precise level, Calculations of precise levelling, Indirect methods for height difference determination, Tachometry, Trigonometric levelling, Earth curvature and refraction and their effects on height differences, applications of levelling, longitudinal levelling, cross section levelling, grid levelling, contour lines, topographic maps, volume computations and earth work. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 25% | 20% | 15% | 40% | ||||||||
| CEP311 | Topographic Surveying (2) | 2 CH | |||||||||
| Prerequisites | ( CEP211 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Introduction to photogrammetry, Coordinates computations in photogrammetry, Flight mission, Topographic maps from digital photogrammetry, Introduction to remote sensing. Satellite images, Topographic maps from satellite images. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP311s | Topographic Surveying (2) | 2 CH | |||||||||
| Prerequisites | ( CEP211s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Introduction to photogrammetry, Coordinates computations in photogrammetry, Flight mission, Topographic maps from digital photogrammetry, Introduction to remote sensing. Satellite images, Topographic maps from satellite images. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
3 | 8 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP312 | Surveying (3) | 2 CH | |||||||||
| Prerequisites | ( CEP214 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Role of Surveying in engineering projects, Total station instrument and its applications in setting out of coordinates, deformation monitoring. Methods of setting out sewer and infrastructure networks, Roads (Hz and Vl curves), Tunnel Surveying, Introduction to geometric geodesy, map projection, coordinate transformation, and Introduction to GPS and GIS. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | 7 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP312s | Surveying (3) | 2 CH | |||||||||
| Prerequisites | ( CEP214s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Role of Surveying in engineering projects, Total station instrument and its applications in setting out of coordinates, deformation monitoring. Methods of setting out of sewer and infrastructure networks, Roads (Hz and Vl curves), Tunnel Surveying, Introduction to geometric geodesy, map projection, coordinate transformation, Introduction to GPS and GIS. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP313 | Photogrammetric Surveying | 2 CH | |||||||||
| Prerequisites | ( CEP312 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to photogrammetry, Types of analog and digital cameras, Aerial surveying, type of aerial photo, geometry of overlapping aerial photos, Determination of 3D coordinates from planning of aerial surveying projects, modern techniques in photogrammetry, types of terrestrial cameras, calibration of cameras, determination of three-dimensional coordinates from terrestrial photos, application of photogrammetry in mobile mapping systems. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP313s | Photogrammetric Surveying | 2 CH | |||||||||
| Prerequisites | ( CEP312s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to photogrammetry, Types of analog and digital cameras, Aerial surveying, type of aerial photo, geometry of overlapping aerial photos, Determination of 3D coordinates from planning of aerial surveying projects, modern techniques in photogrammetry, types of terrestrial cameras, calibration of cameras, determination of three-dimensional coordinates from terrestrial photos, application of photogrammetry in mobile mapping systems. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP314 | Infrastructure Network Planning | 2 CH | |||||||||
| Prerequisites | ( CEP312 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Role of GIS in engineering projects, holistic view of integrated infrastructure networks for public works, effective planning methods, build-up of integrated GIS/data base for infrastructure networks, indicators for monitoring and decision-making of infrastructure networks. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | 8 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP314s | Infrastructure Network Planning | 2 CH | |||||||||
| Prerequisites | ( CEP312s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 1 Hour | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Role of GIS in engineering projects, holistic view of integrated infrastructure networks for public works, effective planning methods, build-up of integrated GIS/data base for infrastructure networks, indicators for monitoring and decision-making of infrastructure networks. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP411 | Geodetic Surveying | 3 CH | |||||||||
| Prerequisites | ( CEP212 ) AND ( CEP311 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Astronomic coordinates and its relation to geodetic coordinates - The geoid - Different geodetic computational surfaces - Properties of ellipsoid - Reduction of surveying observations - Determination of coordinates of points on the computational surface - Transformations between coordinate systems - Errors in GPS observations - Coordinates determinations using different GPS techniques - GPS operation planning - Applications of GPS in engineering projects. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP411s | Geodetic Surveying | 3 CH | |||||||||
| Prerequisites | ( CEP212s ) AND ( CEP311s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Astronomic coordinates and its relation to geodetic coordinates - The geoid - Different geodetic computational surfaces - Properties of ellipsoid - Reduction of surveying observations - Determination of coordinates of points on the computational surface - Transformations between coordinate systems - Errors in GPS observations - Coordinates determinations using different GPS techniques - GPS operation planning - Applications of GPS in engineering projects. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
5 | 9 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP412 | Hydrographic Surveying | 2 CH | |||||||||
| Prerequisites | ( CEP311 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to natural phenomena and their effect on coasts and harbours - Planning factors which affect the design of harbours and their protection- Design of dry basins and navigation channels: Open and determined- Different kinds of hydrographic survey - Engineering projects that need the application of hydrographic surveying applications - Instruments used in hydrographic surveying, kinds and accuracies - Navigation tools used marine scanning - Topographic maps production of sea bed - Different methods for volumes computations of sea bed for different hydrographic projects. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP412s | Hydrographic Surveying | 2 CH | |||||||||
| Prerequisites | ( CEP311s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to natural phenomena and their effect on coasts and harbours - Planning factors which affect the design of harbours and their protection- Design of dry basins and navigation channels: Open and determined- Different kinds of hydrographic survey - Engineering projects that need the application of hydrographic surveying applications - Instruments used in hydrographic surveying, kinds and accuracies - Navigation tools used marine scanning - Topographic maps production of sea bed - Different methods for volumes computations of sea bed for different hydrographic projects. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP413 | Geographic Information Systems GIS | 2 CH | |||||||||
| Prerequisites | ( CEP311 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to geographic information system (GIS), kinds of used information, transforming the analog drawings to digital maps and study of the errors resulting from the process of transforming and merging, building attribute date base and linking it with the analog data. Methods of data input, store and output. Applications of GIS in the field of roads, transportations and sanitary engineering. Applications of GIS in water resources harbours, marine contraction and hydraulic contraction like regulators, dams and other projects. Decision making support by GIS in non-engineering fields. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP413s | Geographic Information Systems GIS | 2 CH | |||||||||
| Prerequisites | ( CEP311s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to geographic information system (GIS), kinds of used information, transforming the analog drawings to digital maps and study of the errors resulting from the process of transforming and merging, building attribute date base and linking it with the analog data. Methods of data input, store and output. Applications of GIS in the field of roads, transportations and sanitary engineering. Applications of GIS in water resources harbours, marine contraction and hydraulic contraction like regulators, dams and other projects. Decision making support by GIS in non-engineering fields. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP414 | Surveying using Satellite | 2 CH | |||||||||
| Prerequisites | ( CEP411 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introductions to Global Navigation Satellite System (GNSS): Conventional navigation, background, concepts and evolutions of global navigation satellite systems (GPS, GLONASS, Galileo, BeiDou/ COMPASS). GNNS Observables. GNSS Mathematics and Position determination techniques. Absolute and relative positioning, principles, observations. Post-processing and real time applications. Coordinate transformations, 3D, and 2D Cartesian and ellipsoidal coordinates. Satellite images overview. Basics of Remote Sensing. Microwave and LiDAR Remote Sensing. Thermal Remote Sensing. Hyper spectral Remote Sensing. Maps from satellite images. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP414s | Surveying using Satellite | 2 CH | |||||||||
| Prerequisites | ( CEP411s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introductions to Global Navigation Satellite System (GNSS): Conventional navigation, background, concepts and evolutions of global navigation satellite systems (GPS, GLONASS, Galileo, BeiDou/ COMPASS). GNNS Observables. GNSS Mathematics and Position determination techniques. Absolute and relative positioning, principles, observations. Post-processing and real time applications. Coordinate transformations, 3D, and 2D Cartesian and ellipsoidal coordinates. Satellite images overview. Basics of Remote Sensing. Microwave and LiDAR Remote Sensing. Thermal Remote Sensing. Hyper spectral Remote Sensing. Maps from satellite images. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP415 | Geodetic and GPS Surveying | 2 CH | |||||||||
| Prerequisites | ( CEP312 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Astronomic coordinates and their relation to geographic coordinates, Astronomic latitude and azimuth determination from astronomic triangle, Least-squares principles and its applications, Different reference ellipsoids and geodetic datums, Reduction of observation, 3D coordinates computations and transformation, Coordinates determinations using different GPS techniques, GPS operation planning, Applications of GPS in infrastructure civil engineering s projects. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP415s | Geodetic and GPS Surveying | 2 CH | |||||||||
| Prerequisites | ( CEP312s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Astronomic coordinates and their relation to geographic coordinates, Astronomic latitude and azimuth determination from astronomic triangle, Least-squares principles and its applications, Different reference ellipsoids and geodetic datums, Reduction of observation, 3D coordinates computations and transformation, Coordinates determinations using different GPS techniques, GPS operation planning, Applications of GPS in infrastructure civil engineering s projects. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP416 | Hydrographic Surveying and Harbor Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP312 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to natural phenomena and their effect on coasts and harbours. Planning factors which affect the design of harbours and their protection. Design of dry basins and navigation channels: Open and determined. Surveying procedure of marine survey and the associated instruments. Methods of horizontal and vertical control in marine survey. Methods of depth determinations and contour mapping. Position determination and setting out of off sure engineering projects. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP416s | Hydrographic Surveying and Harbor Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP312s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to natural phenomena and their effect on coasts and harbours. Planning factors which affect the design of harbours and their protection. Design of dry basins and navigation channels: Open and determined. Surveying procedure of marine survey and the associated instruments. Methods of horizontal and vertical control in marine survey. Methods of depth determinations and contour mapping. Position determination and setting out of off sure engineering projects. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP417 | GIS Applications in Civil infrastructure Projects | 2 CH | |||||||||
| Prerequisites | ( CEP312 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction, GIS components, Data models: coordinates, attribute data and types, vector data models, Raster Data models, Data and file structure. Map projection and coordinate systems. Building a GIS data base, digitizing, coordinate transformation. Digital Data. Attribute data and tables. Basic spatial analysis in infrastructure projects. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP417s | GIS Applications in Civil infrastructure Projects | 2 CH | |||||||||
| Prerequisites | ( CEP312s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction, GIS components, Data models: coordinates, attribute data and types, vector data models, Raster Data models, Data and file structure. Map projection and coordinate systems. Building a GIS data base, digitizing, coordinate transformation. Digital Data. Attribute data and tables. Basic spatial analysis in infrastructure projects. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP221 | Introduction to Transportation & Traffic Engineering | 3 CH | |||||||||
| Prerequisites | ( PHM111 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Transportation planning: Introduction to transportation planning. Stages of the urban and regional transportation plans, Data collection process required for the transportation plans, Stages of the travel demand forecasting process using the traditional sequential approach, Trip generation - trip distribution; Modal choice; Network assignments; Network equilibrium; Traffic studies (volume, speed, and density); Traffic flow characteristics; Intersection control; Conflict point at intersection; Traffic signal design, Weaving for intersection. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | ||||||||||
| Building Engineering |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP221s | Introduction to Transportation & Traffic Engineering | 3 CH | |||||||||
| Prerequisites | ( PHM111s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Transportation planning: Introduction to transportation planning. Stages of the urban and regional transportation plans, Data collection process required for the transportation plans, Stages of the travel demand forecasting process using the traditional sequential approach, Trip generation - trip distribution; Modal choice; Network assignments; Network equilibrium; Traffic studies (volume, speed, and density); Traffic flow characteristics; Intersection control; Conflict point at intersection; Traffic signal design, Weaving for intersection. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP321 | Transportation Planning | 3 CH | |||||||||
| Prerequisites | ( PHM111 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to transportation planning, stages of urban and regional transportation plans, Data collection process required for the transportation plans, Stages of the travel demand forecasting process using the traditional sequential approach, (trip generation, trip distribution, modal split, and trip assignment), evaluation of the transportation projects, environmental impact assessment of transportation projects. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP321s | Transportation Planning | 3 CH | |||||||||
| Prerequisites | ( PHM111s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Introduction to transportation planning, stages of urban and regional transportation plans, Data collection process required for the transportation plans, Stages of the travel demand forecasting process using the traditional sequential approach, (trip generation, trip distribution, modal split, and trip assignment), evaluation of the transportation projects, environmental impact assessment of transportation projects. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
3 | 8 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP322 | Transportation and Roads Engineering | 2 CH | |||||||||
| Prerequisites | ( PHM111 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to transportation planning, stages of urban and regional transportation plans, travel demand forecasting process, Applications of Intelligent Transportation Systems, Classification of roads, Traffic characteristics, Geometric design criteria, Sight distances, Horizontal alignment, Vertical alignment, Elements of cross section, At grade intersection design, traffic flow characteristics (traffic volume, traffic speed, traffic density), Characterization and evaluation of pavement materials, Design of asphalt mixes, Load and truck considerations, Stresses in flexible pavement, stresses in Rigid pavement, Flexible pavement design, Rigid pavement design | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP322s | Transportation and Roads Engineering | 2 CH | |||||||||
| Prerequisites | ( PHM111s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to transportation planning, stages of urban and regional transportation plans, travel demand forecasting process, Applications of Intelligent Transportation Systems, Classification of roads, Traffic characteristics, Geometric design criteria, Sight distances, Horizontal alignment, Vertical alignment, Elements of cross section, At grade intersection design, traffic flow characteristics (traffic volume, traffic speed, traffic density), Characterization and evaluation of pavement materials, Design of asphalt mixes, Load and truck considerations, Stresses in flexible pavement, stresses in Rigid pavement, Flexible pavement design, Rigid pavement design | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Water Engineering and Hydraulic Structures |
3 | 7 | |||||||||
| Structural Engineering |
3 | 7 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP323 | Principles of Traffic Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP221 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Traffic Flow Theory; Vehicle, roadway and driver characteristics, Traffic signal timing, Parking studies; Traffic safety studies, Capacity analysis of basic freeway segments, multilane, and two-lane highways, Computer applications. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP323s | Principles of Traffic Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP221s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Traffic Flow Theory; Vehicle, roadway and driver characteristics, Traffic signal timing, Parking studies; Traffic safety studies, Capacity analysis of basic freeway segments, multilane, and two-lane highways, Computer applications. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP421 | Traffic Engineering | 3 CH | |||||||||
| Prerequisites | ( CEP321 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Traffic engineering elements (driver, pedestrians, vehicle, road), traffic flow characteristics (volume, speed, and density), travel time, and delay, Traffic volume studies, traffic speed studies, alignment and design of intersections, traffic signal design. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP421s | Traffic Engineering | 3 CH | |||||||||
| Prerequisites | ( CEP321s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Traffic engineering elements (driver, pedestrians, vehicle, road), traffic flow characteristics (volume, speed, and density), traffic flow relationships, introduction to intersection control, geometric design of intersections, traffic signal design. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | 9 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP422 | Traffic Management Systems | 2 CH | |||||||||
| Prerequisites | ( CEP321 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Traffic problems impact, difference between traffic and transportation management, objectives of traffic management, traffic management measures for traffic operation improvement (one-way street, coordinating signal timing, restricting turning movements, tidal and reversible flow), Management measures for public transport, definition and applications of Intelligent transport systems, traffic impact studies. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP422s | Traffic Management Systems | 2 CH | |||||||||
| Prerequisites | ( CEP321s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Traffic problems impact, difference between traffic and transportation management, objectives of traffic management, traffic management measures for traffic operation improvement (one-way street, coordinating signal timing, restricting turning movements, tidal and reversible flow), Management measures for public transport, definition and applications of Intelligent transport systems, traffic impact studies. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | 9 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP423 | Traffic Studies and Analysis | 2 CH | |||||||||
| Prerequisites | ( CEP421 ) AND ( CEP321 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Traffic control devices, intersection design software applications, traffic weaving, pedestrians and bikes movement characteristics, accidents studies, parking studies, traffic air pollution models. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP423s | Traffic Studies and Analysis | 2 CH | |||||||||
| Prerequisites | ( CEP421s ) AND ( CEP321s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction, traffic volume studies, spot speed studies, travel time and delay studies, parking studies, and safety studies. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP424 | Transportation Economics | 2 CH | |||||||||
| Prerequisites | ( CEP221 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Application of micro- and macro-economic theories to transportation system analysis; interaction between transportation system, land use, and regional economics; mobility, accessibility, and system reliability; market equilibrium; pricing, willingness to pay, and welfare analysis; cost benefit analysis; project finance. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP424s | Transportation Economics | 2 CH | |||||||||
| Prerequisites | ( CEP221s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Application of micro- and macro-economic theories to transportation system analysis; interaction between transportation system, land use, and regional economics; mobility, accessibility, and system reliability; market equilibrium; pricing, willingness to pay, and welfare analysis; cost benefit analysis; project finance. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP425 | Urban Transportation Planning | 2 CH | |||||||||
| Prerequisites | ( CEP221 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Principles of planning, evaluation, selection, adoption, financing, and implementation of alternative urban transportation systems; transportation modelling--trip generation, trip distribution, modal choice, traffic assignment, technological characteristics and operation of modern transit and other movement systems. Site development and traffic impact analysis, financial and economic assessment of transport projects, environmental impact of transport project. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP425s | Urban Transportation Planning | 2 CH | |||||||||
| Prerequisites | ( CEP221s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Principles of planning, evaluation, selection, adoption, financing, and implementation of alternative urban transportation systems; transportation modelling--trip generation, trip distribution, modal choice, traffic assignment, technological characteristics and operation of modern transit and other movement systems. Site development and traffic impact analysis, financial and economic assessment of transport projects, environmental impact of transport project. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP426 | Intelligent Transportation Systems | 2 CH | |||||||||
| Prerequisites | ( CEP221 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction: what is ITS, Why ITS-Requirements and needs of ITS Services, ITS Technologies, ITS User Services and Taxonomy, ITS Enabling Technologies, ITS Deployments and Benefits, Introduction to ITS Architecture, Transportation Planning and ITS, ITS Evaluation, Types of Risks and Mitigation Strategies, ITS Challenges and Opportunities in Developing Countries, Applicability to local and regional context, Case Studies. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP426s | Intelligent Transportation Systems | 2 CH | |||||||||
| Prerequisites | ( CEP221s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction: what is ITS, Why ITS-Requirements and needs of ITS Services, ITS Technologies, ITS User Services and Taxonomy, ITS Enabling Technologies, ITS Deployments and Benefits, Introduction to ITS Architecture, Transportation Planning and ITS, ITS Evaluation, Types of Risks and Mitigation Strategies, ITS Challenges and Opportunities in Developing Countries, Applicability to local and regional context, Case Studies. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP331 | Roads and Airport Engineering | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Classification of roads, Traffic characteristics, Geometric design criteria, Sight distances, Horizontal alignment, Vertical alignment, Elements of cross section. Pavement construction materials: Design and characteristics of asphalt mixes, Characterization of pavement materials, testing and specifications, Load and truck considerations, Soil stabilization, Stresses in flexible pavements, Stresses in rigid pavements. Flexible pavement design, Rigid pavement design, Airports pavement design. Technology of roads construction, Quality control. Surface drainage design for roads and airports, Road maintenance, Recycling of road pavement materials, Pavement management systems, Computer application in highways design. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP331s | Roads and Airport Engineering | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Classification of roads, Traffic characteristics, Geometric design criteria, Sight distances, Horizontal alignment, Vertical alignment, Elements of cross section. Pavement construction materials: Design and characteristics of asphalt mixes, Characterization of pavement materials, testing and specifications, Load and truck considerations, Soil stabilization, Stresses in flexible pavements, Stresses in rigid pavements. Flexible pavement design, Rigid pavement design, Airports pavement design. Technology of roads construction, Quality control. Surface drainage design for roads and airports, Road maintenance, Recycling of road pavement materials, Pavement management systems, Computer application in highways design. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
3 | 7 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP332 | Highway Geometric and Structural Design | 3 CH | |||||||||
| Prerequisites | ( CEP221 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Highway classification, highway hierarchy, design control and criteria, road cross section elements, sight distances, applications of sight distances horizontal alignment, vertical alignment, consistency of alignment, types of intersections, intersection planning, traffic control devices. Soil classification, evaluation of soil strength, types of pavements, pavement layers and properties stresses in flexible pavement, design of flexible pavement, overlay design for flexible pavement, stresses in rigid pavement, design of rigid pavement | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | 7 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP332s | Highway Geometric and Structural Design | 3 CH | |||||||||
| Prerequisites | ( CEP221s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Highway classification, highway hierarchy, design control and criteria, road cross section elements, sight distances, applications of sight distances horizontal alignment, vertical alignment, consistency of alignment, types of intersections, intersection planning, traffic control devices. Soil classification, evaluation of soil strength, types of pavements, pavement layers and properties stresses in flexible pavement, design of flexible pavement, overlay design for flexible pavement, stresses in rigid pavement, design of rigid pavement | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP333 | Road Construction Material | 2 CH | |||||||||
| Prerequisites | ( CEP332 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Soil classification, evaluation of soil strength, road embankment material, sub- grade material, sub-base material, base course material, asphalt mix types, design of asphalt mixes, quality control tests. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP333s | Road Construction Material | 2 CH | |||||||||
| Prerequisites | ( CEP332s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Soil classification, evaluation of soil strength, road embankment material, sub- grade material, sub-base material, base course material, asphalt mix types, design of asphalt mixes, quality control tests. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP431 | Highway Construction Technology | 3 CH | |||||||||
| Prerequisites | ( CEP331 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Technology of embankment construction, technology of pavement construction. Lay down of asphalt mixes: compaction of asphalt mixes. Operation and supervision of asphalt mixing plants, equipment, inspection, quality control, surface treated pavements, methods of soil stabilization. Rigid pavements: technology of construction, quality control. construction requirements for modified binders: polymers, Sulphur, mineral filler and other additives. Use of asphalt in hydraulic structures: reservoirs, tanks design, dams, canal lining, embankment protection, coastal structures. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP431s | Highway Construction Technology | 3 CH | |||||||||
| Prerequisites | ( CEP331s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Technology of embankment construction, technology of pavement construction. Lay down of asphalt mixes: compaction of asphalt mixes. Operation and supervision of asphalt mixing plants, equipment, inspection, quality control, surface treated pavements, methods of soil stabilization. Rigid pavements: technology of construction, quality control. construction requirements for modified binders: polymers, Sulphur, mineral filler and other additives. Use of asphalt in hydraulic structures: reservoirs, tanks design, dams, canal lining, embankment protection, coastal structures. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | 10 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP432 | Maintenance of Roads and Airport | 2 CH | |||||||||
| Prerequisites | ( CEP331 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Assessment of pavement distresses: Assessment of flexible pavement distresses and assessment of rigid pavement distresses, "Tests of pavement evaluation, methods of pavement evaluation, Road maintenance, Maintenance of flexible pavement. Maintenance of rigid pavement, Maintenance of pedestrian crossing routes, Road cubs and pitching, Maintenance of unpaved roads, Maintenance of drainage system, Maintenance of opened and covered ditches, Maintenance of surface water drainage system, Recycling of road pavement materials, Reconstruction works, Pavement management system. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP432s | Maintenance of Roads and Airport | 2 CH | |||||||||
| Prerequisites | ( CEP331s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| The course covers the Assessment of pavement distresses: Assessment of flexible pavement distresses and assessment of rigid pavement distresses, "Tests of pavement evaluation, methods of pavement evaluation, Road maintenance, Maintenance of flexible pavement. Maintenance of rigid pavement, Maintenance of pedestrian crossing routes, Road cubs and pitching, Maintenance of unpaved roads, Maintenance of drainage system, Maintenance of opened and covered ditches, Maintenance of surface water drainage system, Recycling of road pavement materials, Reconstruction works, Pavement management system. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP433 | Airport Planning and Design | 2 CH | |||||||||
| Prerequisites | ( CEP331 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Airport site location selection, Airport components, planning of both airside and landside, Airport capacity, Airport geometric design, Airport structure design, Airport Utilities and infrastructures, Noise Control. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP433s | Airport Planning and Design | 2 CH | |||||||||
| Prerequisites | ( CEP331s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Airport site location selection, Airport components, planning of both airside and landside, Airport capacity, Airport geometric design, Airport structure design, Airport Utilities and infrastructures, Noise Control. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP434 | Road Maintenance | 2 CH | |||||||||
| Prerequisites | ( CEP332 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Pavement types, Pavement materials; sub-grade stabilization methods; Principles of mix design using SUPERPAVE; Analysis of stresses in flexible and rigid pavement, Design methods of highway flexible and rigid pavements; Overlay design, Computer applications. Pavement Maintenance and Quality Control - Routine, Periodic Maintenance, Special Repairs, Responsive Maintenance Programs, Rehabilitation and Reconstruction, Components of Pavement Maintenance Management System (PMMS). | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP434s | Road Maintenance | 2 CH | |||||||||
| Prerequisites | ( CEP332s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Pavement types, Pavement materials; sub-grade stabilization methods; Principles of mix design using SUPERPAVE; Analysis of stresses in flexible and rigid pavement, Design methods of highway flexible and rigid pavements; Overlay design, Computer applications. Pavement Maintenance and Quality Control - Routine, Periodic Maintenance, Special Repairs, Responsive Maintenance Programs, Rehabilitation and Reconstruction, Components of Pavement Maintenance Management System (PMMS). | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP435 | Road Construction | 2 CH | |||||||||
| Prerequisites | ( CEP332 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Road construction equipment, equipment productivity and efficiency, new trends in road construction, soil stabilization and soil reinforcement, full depth reclamations of deteriorated pavement, quality control and quality assurance | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP435s | Road Construction | 2 CH | |||||||||
| Prerequisites | ( CEP332s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Road construction equipment, equipment productivity and efficiency, new trends in road construction, soil stabilization and soil reinforcement, full depth reclamations of deteriorated pavement, quality control and quality assurance | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP436 | Airport Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP332 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Civil airport location selection, Airport planning, airside planning, landside planning, airport capacity, airport geometric design; runway, taxiway, aprons, parking facilities airport pavement design for critical and non-critical airfield elements, noise control. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP436s | Airport Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP332s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Civil airport location selection, Airport planning, airside planning, landside planning, airport capacity, airport geometric design; runway, taxiway, aprons, parking facilities airport pavement design for critical and non-critical airfield elements, noise control. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP341 | Railway Engineering (1) | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Railway dynamics: Tractive effort and resistance, Acceleration and braking, Line capacity. Railway alignment: Longitudinal and cross sections, Railway path, Vertical and horizontal curve design, Gaparite, cumulative curve. Structural design of track: Wheel – rail interaction, forces acting on the rail, joined and welded rail design, sleeper and ballast design, Unballasted track and magnetic levitation train, turnouts, stations and signals, Renewal and maintenance. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP341s | Railway Engineering (1) | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Railway dynamics: Tractive effort and resistance, Acceleration and braking, Line capacity. Railway alignment: Longitudinal and cross sections, Railway path, Vertical and horizontal curve design, Gaparite, cumulative curve. Structural design of track: Wheel – rail interaction, forces acting on the rail, joined and welded rail design, sleeper and ballast design, Unballasted track and magnetic levitation train, turnouts, stations and signals, Renewal and maintenance. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
3 | 7 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP342 | Railway Engineering Principles | 2 CH | |||||||||
| Prerequisites | ( CEP221 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Railway dynamics, Tractive effort and resistances, Acceleration and braking; Railway Alignment, Longitudinal and cross sections, Vertical and horizontal curve design; Structural design of track, Jointed and welded rail design, Sleeper and ballast design; Turnouts and switches, Switch, Crossover, Diamond crossing, Scissor crossover, slip, Double junction; Stations and yards, Passenger and freight stations, Locomotive and stabling yard, Sorting and marshalling yards; Signalling; Train traffic management, Automatic block system (ABS), Centralized traffic control (CTC), Automatic control system (ATC),Railway capacity, Railway cost, Railway renewal and maintenance management. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | 8 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP342s | Railway Engineering Principles | 2 CH | |||||||||
| Prerequisites | ( CEP221s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Railway dynamics, Tractive effort and resistances, Acceleration and braking; Railway Alignment, Longitudinal and cross sections, Vertical and horizontal curve design; Structural design of track, Jointed and welded rail design, Sleeper and ballast design; Turnouts and switches, Switch, Crossover, Diamond crossing, Scissor crossover, slip, Double junction; Stations and yards, Passenger and freight stations, Locomotive and stabling yard, Sorting and marshalling yards; Signalling; Train traffic management, Automatic block system (ABS), Centralized traffic control (CTC), Automatic control system (ATC),Railway capacity, Railway cost, Railway renewal and maintenance management. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP441 | Railway Engineering (2) | 2 CH | |||||||||
| Prerequisites | ( CEP341 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Turnouts and switches: Switch, Diamond crossing, Crossover, Scissor crossover, Slip, Double junction. Stations and yards: Passenger and freight stations, Locomotive and stabling yards, sorting and marshalling yard. Railway cost: Price and subsidy. Signals: Classification and types, Mechanical devices of interlocking, train traffic control, Automatic Block System (ABS), Centralized Traffic Control system (CTC), Automatic Train Control (ATC) system. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP441s | Railway Engineering (2) | 2 CH | |||||||||
| Prerequisites | ( CEP341s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Turnouts and switches: Switch, Diamond crossing, Crossover, Scissor crossover, Slip, Double junction. Stations and yards: Passenger and freight stations, Locomotive and stabling yards, sorting and marshalling yard. Railway cost: Price and subsidy. Signals: Classification and types, Mechanical devices of interlocking, train traffic control, Automatic Block System (ABS), Centralized Traffic Control system (CTC), Automatic Train Control (ATC) system. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP442 | Railway Signaling and Control System | 2 CH | |||||||||
| Prerequisites | ( CEP441 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Functions of signalling, Semaphore signalling, Operating principles of light signalling, Equipment and parts of a light signalling system, Train running procedure in a light signalling system, Speed control, Centralized traffic control (CTC) Systems, Automatic Train Control (ATC), Positive Train Control (PTC). | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP442s | Railway Signaling and Control System | 2 CH | |||||||||
| Prerequisites | ( CEP441s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Functions of signalling, Semaphore signalling, Operating principles of light signalling, Equipment and parts of a light signalling system, Train running procedure in a light signalling system, Speed control, Centralized traffic control (CTC) Systems, Automatic Train Control (ATC), Positive Train Control (PTC). | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
5 | 10 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP151 | Introduction to Environmental Engineering | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 75 | Equivalent ECTS | 3 | ||||||||
| Course Content | |||||||||||
| Introduction to environmental sciences: Water resources, Water supply, Wastewater systems, Solid waste management, Air pollution. Solid waste management: Collection, Handling, Separation and treatment, Disposal, Recycling and reuse. Monitoring and control, Noise, Environmental laws and its applications. Ground water pollution, Surface water pollution, Engineering projects to fight natural water pollution. Air: Quality, Environmental impact of Air pollution, Engineering projects to fight natural Air pollution. Soil: Quality, Environmental impact of Soil pollution, Engineering projects to fight natural Soil pollution. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
0 | 4 | |||||||||
| Civil Infrastructure Engineering |
1 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP151s | Introduction to Environmental Engineering | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 75 | Equivalent ECTS | 3 | ||||||||
| Course Content | |||||||||||
| Introduction to environmental sciences: Water resources, Water supply, Wastewater systems, Solid waste management, Air pollution. Solid waste management: Collection, Handling, Separation and treatment, Disposal, Recycling and reuse. Monitoring and control, Noise, Environmental laws and its applications. Ground water pollution, Surface water pollution, Engineering projects to fight natural water pollution. Air: Quality, Environmental impact of Air pollution, Engineering projects to fight natural Air pollution. Soil: Quality, Environmental impact of Soil pollution, Engineering projects to fight natural Soil pollution. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP251 | Green Building Systems and Infrastructure | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 2 Hours | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| The fundamentals of water supply works. Water supply systems and distribution networks. Introduction to wastewater systems, Plumbing equipment and sanitation, water collection and treatment, wastewater treatment, firefighting and protection systems. These fundamentals are in compliance with environmental basics and considerations. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Environmental Architecture and Urbanism |
2 | 6 | |||||||||
| Landscape Architecture |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP251s | Green Building Systems and Infrastructure | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 2 Hours | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| The fundamentals of water supply works. Water supply systems and distribution networks. Introduction to wastewater systems, Plumbing equipment and sanitation, water collection and treatment, wastewater treatment, firefighting and protection systems. These fundamentals are in compliance with environmental basics and considerations. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP351 | Water and wastewater Networks | 3 CH | |||||||||
| Prerequisites | ( CEI211 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Preliminary studies for water supply and sewerage projects, sources of water, design flow rates, water collection, water pumping and transportation, water storage, water distribution networks, wastewater collection systems, hydraulic design, pipe material, network accessories, pump stations, force main, water hammer. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP351s | Water and wastewater Networks | 3 CH | |||||||||
| Prerequisites | ( CEI211s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Preliminary studies for water supply and sewerage projects, sources of water, design flow rates, water collection, water pumping and transportation, water storage, water distribution networks, wastewater collection systems, hydraulic design, pipe material, network accessories, pump stations, force main, water hammer. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
3 | 8 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP352 | Sanitary Engineering | 3 CH | |||||||||
| Prerequisites | ( CEI211 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Preliminary studies for water supply and sewerage projects, sources of water, water quality and standards, design flow rates, water collection, water pumping and transportation works, water storage, water distribution networks, wastewater collection networks, hydraulic design, pump stations, force mains, pipe materials, network accessories. Design of water treatment plants using conventional processes. Design of wastewater treatment plants using conventional processes, sludge treatment. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP352s | Sanitary Engineering | 3 CH | |||||||||
| Prerequisites | ( CEI211s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Preliminary studies for water supply and sewerage projects, sources of water, water quality and standards, design flow rates, water collection, water pumping and transportation works, water storage, water distribution networks, wastewater collection networks, hydraulic design, pump stations, force mains, pipe materials, network accessories. Design of water treatment plants using conventional processes. Design of wastewater treatment plants using conventional processes, sludge treatment. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Structural Engineering |
3 | 10 | |||||||||
| Water Engineering and Hydraulic Structures |
3 | 8 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP353 | Design of Water and Wastewater Networks | 3 CH | |||||||||
| Prerequisites | ( CEI111 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Water distribution networks: Types of distribution systems, Hydraulic design, water demand (hourly, daily and monthly flow), fire requirements, pipes in series, pipes in parallel, planning consideration of pipe network, Types of water pipes, Fittings, Types of Valves and its locations. Location and volume of elevated storage tanks, Water hammer, Pipes testing, Wastewater collection systems: Sources and planning consideration, per capita wastewater flow, minimum and maximum flow, Hydraulic design. Types of sewer pipes, fittings, design of pump stations, design of force mains, Water hammer. Pipe testing. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | 7 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP353s | Design of Water and Wastewater Networks | 3 CH | |||||||||
| Prerequisites | ( CEI111s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Water distribution networks: Types of distribution systems, Hydraulic design, water demand (hourly, daily and monthly flow), fire requirements, pipes in series, pipes in parallel, planning consideration of pipe network, Types of water pipes, Fittings, Types of Valves and its locations. Location and volume of elevated storage tanks, Water hammer, Pipes testing, Wastewater collection systems: Sources and planning consideration, per capita wastewater flow, minimum and maximum flow, Hydraulic design. Types of sewer pipes, fittings, design of pump stations, design of force mains, Water hammer. Pipe testing. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP354 | Computer Applications in Sanitary Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP353 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to WaterCad software: Training to feed the software with the input data such as: water demand, flow pattern, peak flow factors, elevated tanks data, pumps data, and junction ground levels, and fire hydrants data. Introduction to SewerCad: Training to feed the software with the input data such as flow at each manhole, conduit catalogues design constrains in SewerCad (such as minimum and maximum slopes minimum and maximum covers, velocity of flow, partially full and manhole). Laboratory training on using WaterCad and SewerCad (data entry and output data). | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP354s | Computer Applications in Sanitary Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP353s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to WaterCad software: Training to feed the software with the input data such as: water demand, flow pattern, peak flow factors, elevated tanks data, pumps data, and junction ground levels, and fire hydrants data. Introduction to SewerCad: Training to feed the software with the input data such as flow at each manhole, conduit catalogues design constrains in SewerCad (such as minimum and maximum slopes minimum and maximum covers, velocity of flow, partially full and manhole). Laboratory training on using WaterCad and SewerCad (data entry and output data). | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP451 | Water and Wastewater Treatment | 3 CH | |||||||||
| Prerequisites | ( CEP351 ) AND ( PHM041 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Water quality and standards, Physical, chemical and biological processes for water and wastewater treatment. Design of water treatment plants using conventional and advanced processes. Design of wastewater treatment plants using conventional and advanced processes. Sludge treatment. Disposal and reuse of wastewater and sludge. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP451s | Water and Wastewater Treatment | 3 CH | |||||||||
| Prerequisites | ( CEP351s ) AND ( PHM041s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 2 Hours | 0 Hours | |||||||||
| Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
| Course Content | |||||||||||
| Water quality and standards, Physical, chemical and biological processes for water and wastewater treatment. Design of water treatment plants using conventional and advanced processes. Design of wastewater treatment plants using conventional and advanced processes. Sludge treatment. Disposal and reuse of wastewater and sludge. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | 9 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP452 | Environmental Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP351 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to environmental sciences, water quality and standards, water pollution sources and impacts, water quality modelling, air pollution and control, solid waste management: collection, handling, separation and treatment, disposal, recycling and reuse. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP452s | Environmental Engineering | 2 CH | |||||||||
| Prerequisites | ( CEP351s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Introduction to environmental sciences, water quality and standards, water pollution sources and impacts, water quality modelling, Noise pollution and control, Oduor pollution and control, Environmental impact assessment studies. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP453 | Sludge Management | 2 CH | |||||||||
| Prerequisites | ( CEP451 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Characteristics and volume of sludge, sludge handling, sludge thickening, sludge stabilization, sludge digestion, sludge composting, sludge dewatering, sludge disposal and reuse, environmental impact. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP453s | Sludge Management | 2 CH | |||||||||
| Prerequisites | ( CEP451s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Characteristics and volume of sludge, sludge handling, sludge thickening, sludge stabilization, sludge digestion, sludge composting, sludge dewatering, sludge disposal and reuse, environmental impact. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP454 | Solid Waste Management | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Source, composition, properties and quantities of solid wastes, handling and storage at the source, solid wastes collection, solid wastes disposal, separation and processing technologies, recycling of solid wastes, planning and operation of solid wastes management systems. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP454s | Solid Waste Management | 2 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Source, composition, properties and quantities of solid wastes, handling and storage at the source, solid wastes collection, solid wastes disposal, separation and processing technologies, recycling of solid wastes, planning and operation of solid wastes management systems. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | 1 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 20% | 20% | 0% | 60% | ||||||||
| CEP455 | Principles of Water and Wastewater Treatment | 2 CH | |||||||||
| Prerequisites | ( CEP353 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Principles of public health engineering, Water Treatment: Water Quality (raw and Treated), Types of water intakes and their locations, low lift pump, flash mixing tanks, Coagulation and Flocculation, Sedimentation process with different types of sedimentation basins, Filtration (slow sand filters/ rapid sand filters/ pressure filters),ground storage, Disinfection, iron and manganese removal, Wastewater treatment: Wastewater quality, Preliminary treatment, Primary treatment, secondary treatment (activated sludge and its modification, oxidation ditches, trickling filters, stabilization ponds), Tertiary treatment, sludge treatment, disinfection and disposal. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
3 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP455s | Principles of Water and Wastewater Treatment | 2 CH | |||||||||
| Prerequisites | ( CEP353s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| Principles of public health engineering, Water Treatment: Water Quality (raw and Treated), Types of water intakes and their locations, low lift pump, flash mixing tanks, Coagulation and Flocculation, Sedimentation process with different types of sedimentation basins, Filtration (slow sand filters/ rapid sand filters/ pressure filters),ground storage, Disinfection, iron and manganese removal, Wastewater treatment: Wastewater quality, Preliminary treatment, Primary treatment, secondary treatment (activated sludge and its modification, oxidation ditches, trickling filters, stabilization ponds), Tertiary treatment, sludge treatment, disinfection and disposal. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP456 | Water and Wastewater Supply | 2 CH | |||||||||
| Prerequisites | ( CEP353 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Sources of water, requirements for water supply projects, population's studies, rates of water consumption for domestic and other purposes, variation in water demand, Fire requirements, design period, Sources of wastewater, quantities and quality, per capita wastewater flow, average wastewater flow, dry and wet weather flow (minimum/maximum), infiltration flow, rainfall flow, separate sewage network, combined sewage network. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP456s | Water and Wastewater Supply | 2 CH | |||||||||
| Prerequisites | ( CEP353s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Sources of water, requirements for water supply projects, population's studies, rates of water consumption for domestic and other purposes, variation in water demand, Fire requirements, design period, Sources of wastewater, quantities and quality, per capita wastewater flow, average wastewater flow, dry and wet weather flow (minimum/maximum), infiltration flow, rainfall flow, separate sewage network, combined sewage network. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP457 | Reuse of Treated Wastewater | 2 CH | |||||||||
| Prerequisites | (CEP353 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Treated effluent for reuse: Quality, Legislation and regulation of reuse of treated wastewater, Health aspects of using reclaimed wastewater, reuse treatment technology, Risk assessment in wastewater reclamation and reuse, economics of wastewater reclamation and reuse projects, Monitoring, sampling and analysis of reuse water. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | ||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 30% | 25% | 0% | 40% | ||||||||
| CEP457s | Reuse of Treated Wastewater | 2 CH | |||||||||
| Prerequisites | ( CEP353s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 2 Hours | 1 Hour | 0 Hours | |||||||||
| Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
| Course Content | |||||||||||
| Treated effluent for reuse: Quality, Legislation and regulation of reuse of treated wastewater, Health aspects of using reclaimed wastewater, reuse treatment technology, Risk assessment in wastewater reclamation and reuse, economics of wastewater reclamation and reuse projects, Monitoring, sampling and analysis of reuse water. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 35% | 25% | 0% | 40% | ||||||||
| CEP491 | Utilities and Infrastructure Graduation Project | 6 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 10 Hours | 0 Hours | |||||||||
| Required SWL | 300 | Equivalent ECTS | 12 | ||||||||
| Course Content | |||||||||||
| The student analyses and designs an integrated engineering system using the principles, foundations, and engineering skills that he acquired during the years of study. The project report submitted by the student should include the detailed steps of analysis and design realizing the requirements of the work and including the computer applications used in mathematical simulation for the designed system, and the laboratory tests if necessary. It also includes engineering drawings and maps needed to implement the designed system. Development and evaluation of sustainable design alternatives with impact assessment. Application of computer-aided design tools. The student must demonstrate in the body of his project, and during the project defence, his full understanding of the principles and foundations on which his project is based. He must also demonstrate ability to apply these principles in the field of his future engineering work. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 15% | 25% | 10% | 40% | ||||||||
| CEP491s | Utilities and Infrastructure Graduation Project | 6 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 10 Hours | 0 Hours | |||||||||
| Required SWL | 300 | Equivalent ECTS | 12 | ||||||||
| Course Content | |||||||||||
| The student analyses and designs an integrated engineering system using the principles, foundations, and engineering skills that he acquired during the years of study. The project report submitted by the student should include the detailed steps of analysis and design realizing the requirements of the work and including the computer applications used in mathematical simulation for the designed system, and the laboratory tests if necessary. It also includes engineering drawings and maps needed to implement the designed system. Development and evaluation of sustainable design alternatives with impact assessment. Application of computer-aided design tools. The student must demonstrate in the body of his project, and during the project defence, his full understanding of the principles and foundations on which his project is based. He must also demonstrate ability to apply these principles in the field of his future engineering work. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Utilities and Infrastructure |
4 | 10 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 50% | 0% | 0% | 50% | ||||||||
| CEP492 | Civil Engineering Design Graduation Project (1) | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 4 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| The project of each team will encompass the conceptual and preliminary design of a medium-size civil engineering project. Students learn civil engineering design process, methodology, identification of objectives, codes, formulation of design problems. Development and evaluation of sustainable design alternatives. Computer-aided design tools. Performance evaluation using modelling, sensitivity analysis, and cost estimation. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | 9 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 60% | 0% | 40% | 0% | ||||||||
| CEP492s | Civil Engineering Design Graduation Project (1) | 3 CH | |||||||||
| Prerequisites | |||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 4 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| The project of each team will encompass the conceptual and preliminary design of a medium-size civil engineering project. Students learn civil engineering design process, methodology, identification of objectives, codes, formulation of design problems. Development and evaluation of sustainable design alternatives. Computer-aided design tools. Performance evaluation using modelling, sensitivity analysis, and cost estimation. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 60% | 0% | 0% | 40% | ||||||||
| CEP493 | Senior Seminar | 2 CH | |||||||||
| Prerequisites | ( CEP492 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 0 Hours | 4 Hours | 0 Hours | |||||||||
| Required SWL | 75 | Equivalent ECTS | 3 | ||||||||
| Course Content | |||||||||||
| Students will research and report on technical issues, research references, and will emphasize innovation and integration in civil engineering. The problems are identified, and solutions are found to improve the performance of the civil in areas such as: Infrastructure Engineering and technologies, and a broad introduction into structures, engineering materials, transport systems, soil engineering, environment protection, Water Resources, water engineering and computer aided design. A technical report is written, presented, and discussed. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | 10 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 55% | 0% | 0% | 40% | ||||||||
| CEP493s | Senior Seminar | 2 CH | |||||||||
| Prerequisites | ( CEP492s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 0 Hours | 4 Hours | 0 Hours | |||||||||
| Required SWL | 75 | Equivalent ECTS | 3 | ||||||||
| Course Content | |||||||||||
| Students will research and report on technical issues, research references, and will emphasize innovation and integration in civil engineering. The problems are identified, and solutions are found to improve the performance of the civil in areas such as: Infrastructure Engineering and technologies, and a broad introduction into structures, engineering materials, transport systems, soil engineering, environment protection, Water Resources, water engineering and computer aided design. A technical report is written, presented, and discussed. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 60% | 0% | 0% | 40% | ||||||||
| CEP494 | Civil Engineering Design Graduation Project (2) | 3 CH | |||||||||
| Prerequisites | ( CEP492 ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 4 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| The project of each team will encompass the integrated design of at least two subdisciplines of civil engineering to achieve high performance at reasonable cost. Through case studies and literature survey, students learn the information gathering and decision/design process, problem resolution, and aspects related to management, teamwork, and communication. Students registering for this course must contact the course coordinator for the detailed procedure. | |||||||||||
| Used in Program / Level | |||||||||||
| Program Name or requirement | Study Level | Semester | |||||||||
| Civil Infrastructure Engineering |
4 | 10 | |||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 60% | 0% | 40% | 0% | ||||||||
| CEP494s | Civil Engineering Design Graduation Project (2) | 3 CH | |||||||||
| Prerequisites | ( CEP492s ) | ||||||||||
| Number of weekly Contact Hours | |||||||||||
| Lecture | Tutorial | Laboratory | |||||||||
| 1 Hour | 4 Hours | 0 Hours | |||||||||
| Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
| Course Content | |||||||||||
| The project of each team will encompass the integrated design of at least two subdisciplines of civil engineering to achieve high performance at reasonable cost. Through case studies and literature survey, students learn the information gathering and decision/design process, problem resolution, and aspects related to management, teamwork, and communication. Students registering for this course must contact the course coordinator for the detailed procedure. | |||||||||||
| Assessment Criteria | |||||||||||
| Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
| 60% | 0% | 0% | 40% | ||||||||