Mohamed Hazem Abdel Latif Profile

Mohamed Hazem Abdel Latif

Emeritus Professor at Design and Production Engineering

Career Information

Academic Information

Articles

Publications

1. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " A study of some thermal and mechanical properties of HDPE blend with marble and granite dust ", Ain Shams Engineering Journal, 2019
2. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " Mechanical behavior of PP reinforced with marble dust ", Construction and Building Materials, 2019
3. Kareem Fathy Abo Elenien, Ayman Abdel-Wahab, Ramadan ElGamsy, Mohamed Hazem Abdellatif, " Assessment of the properties of PP composite with addition of recycled tire rubber ", Ain Shams Engineering Journal, 2018
4. A. H. Awad, Ahmed W. Abdel-Ghany, Ayman A. Abd El-Wahab, Ramadan El-Gamasy & Mohamed Hazem Abdellatif, " The influence of adding marble and granite dust on the mechanical and physical properties of PP composites ", Journal of Thermal Analysis and Calorimetry, 2020
5. A.H. Awad ⇑ , Ramadan El-Gamasy, Ayman A. Abd El-Wahab, Mohamed Hazem Abdellatif, " Assessment of mechanical properties of HDPE composite with addition of marble and granite dust ", Ain Shams Engineering Journal, 2020
6. .H. Awad, Ayman Aly Abd El-Wahab, Ramadan El-Gamsy M. Hazem Abdel-latif, " Mechanical and Physical Properties of PP and HDPE ", Engineering Science, 2020
7. Bassant Hany Mousa Ramadan El gamsy Mohamed Hazem Abdel Latif, " Mechanical behaviour of rubber hybrid composites ", IOP Conference Series: Materials Science and Engineering, 2019
8. Mohamed Mohamed Karbous* , Ayman Abd El Wahab, Ramadan El Gamasy, Mohamed Hazem Abdellatif, " Assessment of the Mechanical Properties of Marble and Granite Dust-High Impact Polystyrene Composites ", Engineering Science, 2020
9. BASSANT HANY MOUSA, AYMAN ABDEL-WAHAB, RAMADAN EL-GAMASY, MOHAMED HAZEM ABDEL LATIF, " MECHANICAL BEHAVIOUR OF H2SO4 TREATED TIRE RUBBER- HDPE COMPOSITES ", International Journal of Mechanical And Production Engineering, 2016
10. KARIM.F.ABO-EL-ENIN, AYMAN.A.ABDELWAHAB, M.H.ABDELLATIF, RAMDAN EL GAMASY, " PP REINFORCED WITH RECYCLED AND TREATED RUBBER PARTICLES ", International Journal of Mechanical And Production Engineering, 2016
11. M. Atef Gabr, Ramadan El Gamsy,Mohamed HazemAbdelLatif, " Mechanical Properties of Metallic and Hybrid Polyurethane Foam Sandwich Composites ", International Journal of Scientific & Engineering Research, 2016
12. M S Ahmed , T Attia1 , A A Abd El-Wahab, R Elgamsy and M H Abd El-latif, " Assessment of the physical properties of banana pseudo stem/ ABS composites ", IOP Conference Series: Materials Science and Engineering, 2019
13. Bola Wagdy, Ayman A. Abd El-Wahab, Ramadan El-gamasy, " Statistical analysis of solid-state recycled aluminum alloy 2011 chips by hot extrusion ", Engineering Science and Military Technologies, 2023
14. Mohamed Abdelaal, Mohamed Hazem Abdellatif Ahmed, Moritz Riede, Ghada Bassioni, " Studying the Effect of High Substrate Temperature on the Microstructure of Vacuum Evaporated TAPC: C₆₀ Organic Solar Thin Films ", Materials, 2021
15. Awad, A.H., Aly Abd El-Wahab, A., El-Gamsy, R., Abdel-latif, M.H., " A study of some thermal and mechanical properties of HDPE blend with marble and granite dust ", Ain Shams Engineering Journal, 2019
16. Awad, A.H., Abdellatif, M.H., " Assessment of mechanical and physical properties of LDPE reinforced with marble dust ", Composites Part B: Engineering, 2019
17. Elsherif, D.M., Abd El-Wahab, A.A., Abdellatif, M.H., " Factors affecting stress distribution in wind turbine blade ", IOP Conference Series: Materials Science and Engineering, 2019
18. Elsherif, D.M., Abd El-Wahab, A.A., Elgamsy, R.B.M., Abdellatif, M.H., " Material selection of wind turbine blade using finite element method ", International Journal of Scientific and Technology Research, 2019
19. Awad, A.H., El-gamasy, R., A. Abd El-Wahab, A., Hazem Abdellatif, M., " Mechanical behavior of PP reinforced with marble dust ", Construction and Building Materials, 2019
20. Yousri, O.M., Abdellatif, M.H., Bassioni, G., " Effect of Al <inf>2</inf> O <inf>3</inf> Nanoparticles on the Mechanical and Physical Properties of Epoxy Composite ", Arabian Journal for Science and Engineering, 2018
21. Ramadan, N., Taha, I., Hammouda, R., Abdellatif, M.H., " Behaviour of hybrid SiC/jute epoxy composites manufactured by vacuum assisted resin infusion ", Polymers and Polymer Composites, 2017
22. , " Use VARI Technique to produce Hybrid Sic - Jute Epoxy Composites ", , 2015
23. , " Alkali Treatment of Jute Fabric for Vacuum Assisted Resin Infusion ", Second International Conference for Industry Academia Collaboration , Egypt, 2015
24. , " Utilization of Granite Dust to Produce Floor and Wall Tiles ", , 2015
25. , " Effect of Mechanical Treatment for Natural Fibers on the Mechanical Properties of Polypropylene Composites ", 1st International Conference on Natural Fibers , Portugal, 2013
26. , " Mechanical Behavior of LDPE Composite reinforced with Natural Fibers ", 1st International Conference on Natural Fibers , Portugal, 2013
27. , " Use of Recycled Rubber to Produce Tiles and other products ", , 2013
28. , " Influence of Fibre and Matrix on the Mechanical Properties of Natural Composite Materials ", Journal of Al Azhar University, Engineering Sector JAUES, 2012
29. , " Failure Modes of Sugar Cane Bagasse Fibres / Polypropelene Composites with two Parallel Pin Loaded Holes ", Journal of Al Azhar University , Engineering Sector JAUES, 2012
30. , " Behaviors of Sandwich Materials ", , 2006
31. , " Deformation and Failure of 3 D Braided Composites ", , 2006
32. , " Mathematical Model for Intraply Hybrid Composites Characterization ", , 2005
33. Taha, I., Abdellatif, M.H., Dietz, P., " Infiltration and coating of rapid prototyping parts ", Advanced Engineering Materials, 2005
34. , " Effects of Lamination and Changes in Layer Thickness on Fatigue Crack Propagation of Lightweight Laminated Metal Composites ", Metallurgical and Materials Transactions A, 2004
35. , " Fatigue Crack Propagation of Al 6090 / Sic p - AL 6013 Laminated Metal Composites ", Metallurgical and Materials Transactions A , 2004
36. , " Effect of Changes in Temperature on Fatigue Crack Growth of Adhesively Bonded Al 2080/Sic/20 p-2080 Al Laminated Composites ", Journal of Materials Science, 2004
37. Hassan, H.A., Lewandowski, J.J., Abd El-Latif, M.H., " Effects of Lamination and Changes in Layer Thickness on Fatigue-Crack Propagation of Lightweight Laminated Metal Composites ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2004
38. Hassan, H.A., Lewandowski, J.J., Abd El-Latif, M.H., " Effects of changes in temperature on fatigue crack growth of adhesively bonded Al 2080/SiC/20p-2080 Al laminated composites ", Journal of Materials Science, 2004
39. Hassan, H.A., Lewandowski, J.J., El-Latif, M.H.A., " Effects of changes in test temperature on fatigue crack propagation of Al6090/SiCp-Al 6013 laminated metal composites ", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2004
40. Abdel Latif, M.H., Rizk, M.A., " STRESS RUPTURE OF Al-Ni EUTECTIC COMPOSITES. ", , 1986
41. Abdel Latif, M.H., El Mahallawy, N.A., Taha, M.A., " MECHANICAL PROPERTIES OF IN-SITU COMPOSITES. ", Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1985
42. Abdel Latif, M.H., El Mahallawy, N.A., Taha, M.A., " Mechanical properties of In‐Situ Composites ", Materialwissenschaft und Werkstofftechnik, 1985
43. El-Mahallawy, N.A., Abdel-Latif, M.H., Taha, M.A., " MICROSTRUCTURE OF IN-SITU COMPOSITES. ", Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1983
44. El‐Mahallawy, N.A., Abdel‐Latif, M.H., Taha, M.A., " Microstructure of In‐Situ composites ", Materialwissenschaft und Werkstofftechnik, 1983
45. Abdel Latif, M.H., Lawley, A., " Effect of oxidation on the toughness and strength of the co, Cr-(Cr,Co)7C3 In-Situ composite ", Metallurgical Transactions A, 1980
46. Farag, M.M., Abd El Latif, M.H., " An analysis of the fatigue behavior of Al-Al <inf>3</inf>Ni composites ", Metallurgical Transactions A, 1976
47. El Latif, M.H.Abd, El Wakil, S.D., " EFFECT OF MOLYBDENUM CONTENT ON THE MECHANICAL PROPERTIES OF SINTERED AND HEAT-TREATED STEEL COMPACTS. ", Powder Metallurgy, 1976
48. Farag, M.M., Abd El Latif, M.H., " An analysis of the mechanical behavior of Al-Al<inf>3</inf>Ni composites ", Metallurgical Transactions A, 1975
49. Mohamed Atef , Ghada Bassioni , Nahid Azab , Mohamed Hazem Abdellatif, " On the acoustical performance of eco-friendly cementitious composite with recycled fine rubber particles ", Construction and Building Materials, 2022
50. Mohamed Atef , Ghada Bassioni , Nahid Azab and Mohamed Hazem Abdellatif, " Assessment of cement replacement with fine recycled rubber particles in sustainable cementitious composites ", Journal of the Mechanical Behavior of Materials, 2021