Courses offered by Irrigation and Hydraulics Engineering Department
The Irrigation and Hydraulics Department is responsible for teaching courses that serve the following programs:
- Several Basic Civil Engineering courses as a Civil Discipline Requirement.
- Water Engineering and Hydraulic Structures Program.
- Structural Engineering Program.
- Utilities and Infrastructure Program.
- Building Engineering Program.
- Civil Infrastructure Engineering Program.
- Landscape Architecture program
Table 64 List of specializations at the Irrigation and Hydraulics Department.
# | Specialization |
1 | Hydraulics |
2 | Irrigation and Drainage |
3 | Design of Irrigation Works |
4 | Coastal and Port Engineering |
5 | Hydrology |
6 | Water Resources |
9 | Graduation Project |
The following abbreviations are the legend for the courses table.
Lvl | Level | UR | University Requirement | SA | Student Activities | ||
CH | Credit Hour | FR | Faculty Requirement | MT | Mid-Term Exam | ||
ECTS | European Credit Transfer System | DR | Discipline Requirement | PE | Practical Exam | ||
SWL | Student Work Load | PR | Program Requirement | FE | Final Exam | ||
Lec | Lectures | ||||||
Tut | Tutorials | ||||||
Lab | Laboratory | ||||||
TT | Total |
Table 65 List of MCT courses.
# | Lvl | Code | Course Title | Credits and SWL | Contact Hours | Classification | Assessment (%) | Prerequisites | ||||||||||||
CH | ECTS | SWL | Lec | Tut | Lab | TT | UR | FR | DR | PR | SA | MT | PE | FE | ||||||
1 | CEI261 | Engineering Economics and Management | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | |||||||
1 | CEI261s | Engineering Economics and Management | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | |||||||
1 | CEI262 | Principles of Water Resources Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI113 ) | ||||||
1 | CEI262s | Principles of Water Resources Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 35 | 25 | 0 | 40 | ( CEI113s ) | ||||||
1 | CEI341 | Coastal Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI211 OR CEI212 ) AND ( CES361 OR CES364 ) | ||||||
1 | CEI341s | Coastal Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | ( CEI211s OR CEI212s ) AND ( CES361s OR CES364s ) | ||||||
1 | CEI351 | Environmental Hydrology | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI221 ) | ||||||
1 | CEI351s | Environmental Hydrology | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | ( CEI221s ) | ||||||
1 | CEI352 | Applied Hydrology | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI333 ) | ||||||
1 | CEI352s | Applied Hydrology | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 35 | 25 | 0 | 40 | ( CEI333s ) | ||||||
1 | CEI361 | Water Resources Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI351 ) | ||||||
1 | CEI361s | Water Resources Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | ( CEI351s ) | ||||||
1 | CEI431 | Hydraulic Structures (2) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI332 ) AND ( CES361 ) | ||||||
1 | CEI431s | Hydraulic Structures (2) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 35 | 15 | 0 | 50 | ( CEI211s ) AND ( CES361s ) | ||||||
1 | CEI432 | Hydraulic Structures (3) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI431 ) AND ( CES465 ) | ||||||
1 | CEI432s | Hydraulic Structures (3) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 35 | 15 | 0 | 50 | ( CEI431s ) AND ( CES465s ) | ||||||
1 | CEI433 | Dams Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI262 OR CEI361 ) AND ( CES361 OR CES364 ) | ||||||
1 | CEI433s | Dams Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI262s OR CEI361s ) AND ( CES361s OR CES364s ) | ||||||
1 | CEI434 | Advanced Hydraulic Structures | 2 | 5 | 125 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI431 ) | ||||||
1 | CEI434s | Advanced Hydraulic Structures | 2 | 5 | 125 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI431s ) | ||||||
1 | CEI435 | Hydraulic Structures | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI333 ) | ||||||
1 | CEI435s | Hydraulic Structures | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 35 | 25 | 0 | 40 | ( CEI333s ) | ||||||
1 | CEI436 | Topics in Hydraulic Structures | 2 | 4 | 100 | 1 | 1 | 0 | 2 | 30 | 25 | 0 | 40 | ( CEI333 ) | ||||||
1 | CEI436s | Topics in Hydraulic Structures | 2 | 4 | 100 | 1 | 1 | 0 | 2 | 35 | 25 | 0 | 40 | ( CEI333s ) | ||||||
1 | CEI441 | Port Engineering and navigation | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI341 ) | ||||||
1 | CEI441s | Port Engineering and navigation | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | ( CEI341s ) | ||||||
1 | CEI442 | Coastal Environment Engineering | 2 | 4 | 100 | 2 | 1 | 1 | 4 | 30 | 25 | 0 | 40 | ( CEI341 ) | ||||||
1 | CEI442s | Coastal Environment Engineering | 2 | 4 | 100 | 2 | 1 | 1 | 4 | 25 | 25 | 0 | 50 | ( CEI341s ) | ||||||
1 | CEI443 | Inland Navigation | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI441 ) | ||||||
1 | CEI443s | Inland Navigation | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | ( CEI441s ) | ||||||
1 | CEI444 | Port Engineering and Shore Protection | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI211 ) | ||||||
1 | CEI444s | Port Engineering and Shore Protection | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI211s ) | ||||||
1 | CEI451 | Ground Water Hydrology | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI111 OR CEI113 ) AND ( CES361 OR CES364 ) | ||||||
1 | CEI451s | Ground Water Hydrology | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI111s OR CEI113s ) AND ( CES361s OR CES364s ) | ||||||
1 | CEI452 | Engineering Hydrology | 2 | 0 | 0 | 0 | 0 | 15 | 25 | 10 | 40 | |||||||||
1 | CEI452s | Engineering Hydrology | 2 | 0 | 0 | 0 | 0 | 50 | 0 | 0 | 50 | |||||||||
1 | CEI461 | Geographic Information Systems in water Engineering | 2 | 4 | 100 | 2 | 0 | 2 | 4 | 30 | 15 | 10 | 40 | ( CEP212 OR CEP312 ) | ||||||
1 | CEI461s | Geographic Information Systems in water Engineering | 2 | 4 | 100 | 2 | 0 | 2 | 4 | 40 | 0 | 10 | 50 | ( CEP212s OR CEP312s ) | ||||||
1 | CEI462 | Water Quality | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI361 ) | ||||||
1 | CEI462s | Water Quality | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI361s ) | ||||||
1 | CEI463 | Environmental Impact Assessment in water Engineering Projects | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI262 OR CEI361 ) AND ( CEI341 ) | ||||||
1 | CEI463s | Environmental Impact Assessment in water Engineering Projects | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 25 | 25 | 0 | 50 | ( CEI262s OR CEI361s ) AND ( CEI341s ) | ||||||
1 | CEI464 | Climate Change Adaptation in Water Resources field | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI361 ) | ||||||
1 | CEI464s | Climate Change Adaptation in Water Resources field | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI361s ) | ||||||
1 | CEI465 | Non-Conventional Water Resources | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 15 | 25 | 10 | 40 | ( CEI361 ) | ||||||
1 | CEI465s | Non-Conventional Water Resources | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 50 | 0 | 0 | 50 | ( CEI361s ) | ||||||
1 | CEI466 | Water Security and Governance | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 30 | 25 | 0 | 40 | ( CEI262 ) | ||||||
1 | CEI466s | Water Security and Governance | 2 | 4 | 100 | 2 | 1 | 0 | 3 | 35 | 25 | 0 | 40 | ( CEI262s ) | ||||||
1 | CEI491 | Water Engineering Graduation Project | 6 | 12 | 300 | 0 | 12 | 0 | 12 | 15 | 25 | 10 | 40 | |||||||
1 | CEI491s | Water Engineering Graduation Project | 6 | 12 | 300 | 0 | 12 | 0 | 12 | 50 | 0 | 0 | 50 | |||||||
1 | CEI492 | Civil Engineering Design Graduation Project (1) | 3 | 0 | 0 | 0 | 0 | 60 | 0 | 40 | 0 | |||||||||
1 | CEI492s | Civil Engineering Design Graduation Project (1) | 3 | 0 | 0 | 0 | 0 | 60 | 40 | |||||||||||
1 | CEI493 | Civil Engineering Senior Seminar | 2 | 0 | 0 | 0 | 0 | 60 | 0 | 0 | 40 | |||||||||
1 | CEI493s | Civil Engineering Senior Seminar | 2 | 0 | 0 | 0 | 0 | 60 | 40 | |||||||||||
1 | CEI494 | Civil Engineering Design Graduation Project (2) | 3 | 0 | 0 | 0 | 0 | 60 | 0 | 40 | 0 | |||||||||
1 | CEI494s | Civil Engineering Design Graduation Project (2) | 3 | 0 | 0 | 0 | 0 | 60 | 40 | |||||||||||
1. Hydraulics | ||||||||||||||||||||
1 | 1 | CEI111 | Fluid Mechanics | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 15 | 25 | 10 | 40 | ( PHM031 ) | ||||
1 | 1 | CEI111s | Fluid Mechanics | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 20 | 20 | 10 | 50 | ( PHM031s ) | ||||
1 | 1 | CEI112 | Hydraulics (1) | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 15 | 25 | 10 | 40 | ( CEI111 ) | ||||
1 | 1 | CEI112s | Hydraulics (1) | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 20 | 20 | 10 | 50 | ( CEI111s ) | ||||
1 | 1 | CEI113 | Fluid Mechanics for Civil Engineers | 3 | 6 | 150 | 2 | 2 | 2 | 6 | x | 20 | 20 | 15 | 40 | ( PHM112 ) | ||||
1 | 1 | CEI113s | Fluid Mechanics for Civil Engineers | 3 | 6 | 150 | 2 | 2 | 2 | 6 | x | 25 | 20 | 15 | 40 | ( PHM112s ) | ||||
1 | 2 | CEI211 | Hydraulics (2) | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 15 | 25 | 10 | 40 | ( CEI112 ) | ||||
1 | 2 | CEI211s | Hydraulics (2) | 2 | 4 | 100 | 2 | 1 | 1 | 4 | x | 20 | 20 | 10 | 50 | ( CEI112s ) | ||||
1 | 2 | CEI212 | Hydraulics | 3 | 6 | 150 | 2 | 2 | 2 | 6 | x | 20 | 20 | 15 | 40 | ( CEI113 ) | ||||
1 | 2 | CEI212s | Hydraulics | 3 | 6 | 150 | 2 | 2 | 2 | 6 | x | 25 | 20 | 15 | 40 | ( CEI113s ) | ||||
1 | 3 | CEI311 | Infrastructure Planning and Landscape Irrigation | 2 | 3 | 75 | 1 | 2 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( PHM022 ) AND ( PHM032 ) | ||||
1 | 3 | CEI311s | Infrastructure Planning and Landscape Irrigation | 2 | 3 | 75 | 1 | 2 | 0 | 3 | x | 25 | 25 | 0 | 50 | ( PHM022s ) AND ( PHM032s ) | ||||
1 | 4 | CEI411 | Hydraulic Networks | 3 | 5 | 125 | 2 | 1 | 2 | 5 | x | 15 | 25 | 10 | 40 | ( CEI211 ) | ||||
1 | 4 | CEI411s | Hydraulic Networks | 3 | 5 | 125 | 2 | 1 | 2 | 5 | x | 20 | 15 | 15 | 50 | ( CEI211s ) | ||||
1 | 4 | CEI412 | Pump Stations Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI211 OR CEI212 ) | ||||
1 | 4 | CEI412s | Pump Stations Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 50 | 0 | 0 | 50 | ( CEI211s OR CEI212s ) | ||||
1 | 4 | CEI413 | Environmental Hydraulics | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI262 OR CEI361 ) | ||||
1 | 4 | CEI413s | Environmental Hydraulics | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 20 | 0 | 50 | ( CEI262s OR CEI361s ) | ||||
1 | 4 | CEI414 | River Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI351 OR CEI352 ) | ||||
1 | 4 | CEI414s | River Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 50 | 0 | 0 | 50 | ( CEI351s OR CEI352s ) | ||||
1 | 4 | CEI415 | Lab and Field Measurements in Water Resources field | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEI351 ) | ||||
1 | 4 | CEI415s | Lab and Field Measurements in Water Resources field | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 40 | 10 | 0 | 50 | ( CEI351s ) | ||||
1 | 4 | CEI416 | Hydraulic Modeling | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI341 ) AND ( CEI352 ) | ||||
1 | 4 | CEI416s | Hydraulic Modeling | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEI341s ) AND ( CEI352s ) | ||||
1 | 4 | CEI417 | Sustainable Urban Water Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI212 ) AND ( CEI352 ) | ||||
1 | 4 | CEI417s | Sustainable Urban Water Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEI212s ) AND ( CEI352s ) | ||||
2. Irrigation and Drainage | ||||||||||||||||||||
1 | 2 | CEI221 | Irrigation and Drainage Engineering | 4 | 5 | 125 | 3 | 2 | 0 | 5 | x | 15 | 25 | 10 | 40 | ( CEI211 ) | ||||
1 | 2 | CEI221s | Irrigation and Drainage Engineering | 4 | 5 | 125 | 3 | 2 | 0 | 5 | x | 20 | 20 | 0 | 60 | ( CEI211s ) | ||||
1 | 2 | CEI222 | Irrigation and Drainage | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 30 | 25 | 0 | 40 | ( CEI212 ) AND ( CEI262 ) | ||||
1 | 2 | CEI222s | Irrigation and Drainage | 3 | 5 | 125 | 2 | 2 | 0 | 4 | x | 35 | 25 | 0 | 40 | ( CEI212s ) AND ( CEI262s ) | ||||
1 | 3 | CEI321 | Modern Irrigation Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI222 ) | ||||
1 | 3 | CEI321s | Modern Irrigation Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 25 | 0 | 40 | ( CEI222s ) | ||||
1 | 4 | CEI421 | Sustainable Drainage Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEI351 ) | ||||
1 | 4 | CEI421s | Sustainable Drainage Systems | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 35 | 15 | 0 | 50 | ( CEI351s ) | ||||
1 | 4 | CEI422 | Advanced Irrigation Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEI331 ) | ||||
1 | 4 | CEI422s | Advanced Irrigation Engineering | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 40 | 0 | 0 | 60 | ( CEI331s ) | ||||
3. Design of Irrigation Works | ||||||||||||||||||||
1 | 1 | CEI131 | Civil Drawing | 2 | 5 | 125 | 1 | 3 | 0 | 4 | x | 15 | 25 | 10 | 40 | ( CEP011 ) | ||||
1 | 1 | CEI131s | Civil Drawing | 2 | 5 | 125 | 1 | 3 | 0 | 4 | x | 25 | 25 | 0 | 50 | ( CEP011s ) | ||||
1 | 1 | CEI132 | Civil Engineering Drawing | 2 | 4 | 100 | 1 | 3 | 1 | 5 | 20 | 20 | 15 | 40 | ( CEP011 ) | |||||
1 | 1 | CEI132s | Civil Engineering Drawing | 2 | 4 | 100 | 1 | 3 | 1 | 5 | 25 | 20 | 15 | 40 | ( CEP011s ) | |||||
1 | 3 | CEI331 | Design of Irrigation Works | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEI221 ) AND ( CES262 ) | ||||
1 | 3 | CEI331s | Design of Irrigation Works | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 25 | 25 | 0 | 50 | ( CEI211s ) AND ( CES262s ) | ||||
1 | 3 | CEI332 | Hydraulic Structures (1) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 15 | 25 | 10 | 40 | ( CEI131 ) AND ( CEI331 ) | ||||
1 | 3 | CEI332s | Hydraulic Structures (1) | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 25 | 25 | 0 | 50 | ( CEI131s ) AND ( CEI211s ) | ||||
1 | 3 | CEI333 | Design of Irrigation Structures | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 30 | 25 | 0 | 40 | ( CEI131 OR CEI132 ) AND ( CEI221 OR CEI222 ) AND ( CEP211 OR CEP214 ) | ||||
1 | 3 | CEI333s | Design of Irrigation Structures | 2 | 4 | 100 | 2 | 1 | 0 | 3 | x | 25 | 25 | 0 | 50 | ( CEI131s ) AND ( CEI211s ) AND ( CES262s ) |
CEI261 | Engineering Economics and Management | 2 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Part (1): Case of new projects: Introduction, Glossary of terms, Benefits and cost model, Cash flow diagrams, Time value of money, Present and annual worth analysis, Economic based Multi Criteria Analysis (MCA), Feasibility study, Project execution plan: Stage (1) (Pre-project studies, Technical studies and engineering Cost estimate, submittal of the preliminary report), Stage (2) (Project design, submittal of the project TOR), Stage (3) (Bidding for contractors, shop drawings, project construction), Stage (4) (Project handling, preliminary project operation). Part (2): Case of Assets: Glossary of terms, Engineering assets, Asset extent, Asset serviceability, Asset Management Plan (AMP), Definition and origin, Features of AMP, Statistics in AMP, Producing AMP, System definition, Stratified random sampling, Environmental and legal aspects, Performance assessment, Asset survey, Cost model, Application of AMP, Implementation and further consideration, Applied case studies. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI261s | Engineering Economics and Management | 2 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Part (1): Case of new projects: Introduction, Glossary of terms, Benefits and cost model, Cash flow diagrams, Time value of money, Present and annual worth analysis, Economic based Multi Criteria Analysis (MCA), Feasibility study, Project execution plan: Stage (1) (Pre-project studies, Technical studies and engineering Cost estimate, submittal of the preliminary report), Stage (2) (Project design, submittal of the project TOR), Stage (3) (Bidding for contractors, shop drawings, project construction), Stage (4) (Project handling, preliminary project operation). Part (2): Case of Assets: Glossary of terms, Engineering assets, Asset extent, Asset serviceability, Asset Management Plan (AMP), Definition and origin, Features of AMP, Statistics in AMP, Producing AMP, System definition, Stratified random sampling, Environmental and legal aspects, Performance assessment, Asset survey, Cost model, Application of AMP, Implementation and further consideration, Applied case studies. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Structural Engineering |
3 | 5 | |||||||||
Water Engineering and Hydraulic Structures |
3 | 5 | |||||||||
Utilities and Infrastructure |
3 | 5 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI262 | Principles of Water Resources Engineering | 2 CH | |||||||||
Prerequisites | ( CEI113 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water-Resources Engineering provides comprehensive coverage of the principles of hydrology (Precipitation, Infiltration, Runoff, Evaporation), principles of hydraulics (flow in closed conduits, open channel flow, flow in rivers, lakes and estuaries, and groundwater flow), and principles of water-resources planning and management estimation of water demands and quality for different purposes, water supply from different sources, and feasibility of water resources projects)). Presented from first principles relevant to the practice of water resources engineering and reinforced by some design applications. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
0 | 5 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI262s | Principles of Water Resources Engineering | 2 CH | |||||||||
Prerequisites | ( CEI113s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water-Resources Engineering provides comprehensive coverage of the principles of hydrology (Precipitation, Infiltration, Runoff, Evaporation), principles of hydraulics (flow in closed conduits, open channel flow, flow in rivers, lakes and estuaries, and groundwater flow), and principles of water-resources planning and management estimation of water demands and quality for different purposes, water supply from different sources, and feasibility of water resources projects)). Presented from first principles relevant to the practice of water resources engineering and reinforced by some design applications. Laboratory and field work on selected topics. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI341 | Coastal Engineering | 2 CH | |||||||||
Prerequisites | ( CEI211 OR CEI212 ) AND ( CES361 OR CES364 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Coastal Engineering and Shore Protection, Natural phenomenon (winds, waves, tide, sea currents), Wave action and propagation (wave breaking, wave refraction, wave diffraction), Wave Impact on coastal structures, Effect of waves on the shoreline, Sediment transport and Shoreline changes, Shore Protection measures. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
3 | 8 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI341s | Coastal Engineering | 2 CH | |||||||||
Prerequisites | ( CEI211s OR CEI212s ) AND ( CES361s OR CES364s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Coastal Engineering and Shore Protection, Natural phenomenon (winds, waves, tide, sea currents), Wave action and propagation (wave breaking, wave refraction, wave diffraction), Wave Impact on coastal structures, Effect of waves on the shoreline, Sediment transport and Shoreline changes, Shore Protection measures. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
3 | 8 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI351 | Environmental Hydrology | 2 CH | |||||||||
Prerequisites | ( CEI221 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Environmental Hydrology - Hydrometeorology: Temperature, Climate Change and its impact - Humidity and Evaporation – Precipitation: Types and Measurements, Rainfall analysis, intensity-duration-frequency (IDF) Curves - Hydromorphology: Watershed Characteristics and Morphological Analysis – Rainfall Runoff Relationship – Runoff Hydrograph Components – Unit Hydrograph: Theory and Applications – Flash Floods: Estimation of Peak Runoff – Negative and Positive Impacts of flash floods - Methods of Flash Flood Control - Flood Routing – Sediment Transport by Flash Floods: Volume Estimation and Control – Surface Water Pollution: Sources and Control - Eutrophication of Lakes. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI351s | Environmental Hydrology | 2 CH | |||||||||
Prerequisites | ( CEI221s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Environmental Hydrology - Hydrometeorology: Temperature, Climate Change and its impact - Humidity and Evaporation – Precipitation: Types and Measurements, Rainfall analysis, intensity-duration-frequency (IDF) Curves - Hydromorphology: Watershed Characteristics and Morphological Analysis – Rainfall Runoff Relationship – Runoff Hydrograph Components – Unit Hydrograph: Theory and Applications – Flash Floods: Estimation of Peak Runoff – Negative and Positive Impacts of flash floods - Methods of Flash Flood Control - Flood Routing – Sediment Transport by Flash Floods: Volume Estimation and Control – Surface Water Pollution: Sources and Control - Eutrophication of Lakes. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
3 | 7 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI352 | Applied Hydrology | 2 CH | |||||||||
Prerequisites | ( CEI333 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Different Applications of Hydrology in Civil Engineering. Design storm, Rainfall statistical analysis. Hydromorphology: Watershed characteristics, Morphological parameters, Time parameters. Surface runoff: Losses estimates (SCS method) Peak flow estimate (Rational Method), Storm hydrograph, Unit hydrograph, Mass curves. Soil loss estimation and Sediment yield. Protection works against flash floods: Storage and detention works, Roads crossing works, Direction change works, Sediment traps, Storm water drainage systems. Subsurface hydrology: Soil-water relations, Characteristics and types of aquifers, groundwater control systems. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | 8 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI352s | Applied Hydrology | 2 CH | |||||||||
Prerequisites | ( CEI333s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Different Applications of Hydrology in Civil Engineering. Design storm, Rainfall statistical analysis. Hydromorphology: Watershed characteristics, Morphological parameters, Time parameters. Surface runoff: Losses estimates (SCS method) Peak flow estimate (Rational Method), Storm hydrograph, Unit hydrograph, Mass curves. Soil loss estimation and Sediment yield. Protection works against flash floods: Storage and detention works, Roads crossing works, Direction change works, Sediment traps, Storm water drainage systems. Subsurface hydrology: Soil-water relations, Characteristics and types of aquifers, groundwater control systems. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI361 | Water Resources Engineering | 2 CH | |||||||||
Prerequisites | ( CEI351 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water Resources in Egypt, Arab countries and Africa. Conventional and non- conventional water resources (reuse and recycling of domestic, industrial and agriculture wastewater, brackish groundwater, seawater, and water harvesting). Principal elements of water resources. Statistics on Water Availability and Future Needs, Water Requirements for Public Supplies and Other Usages; Factors influencing water availability and supply; hazards associated with water (droughts and flooding and pollution); the role of water in sustaining healthy ecosystems, Water Resources Planning and Management, Water Quality management, Introduction to Economic Feasibility of Water resources Projects, Water Rights, Hydro-politics and Trans-boundary Issues. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI361s | Water Resources Engineering | 2 CH | |||||||||
Prerequisites | ( CEI351s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water Resources in Egypt, Arab countries and Africa. Conventional and non- conventional water resources (reuse and recycling of domestic, industrial and agriculture wastewater, brackish groundwater, seawater, and water harvesting). Principal elements of water resources. Statistics on Water Availability and Future Needs, Water Requirements for Public Supplies and Other Usages; Factors influencing water availability and supply; hazards associated with water (droughts and flooding and pollution); the role of water in sustaining healthy ecosystems, Water Resources Planning and Management, Water Quality management, Introduction to Economic Feasibility of Water resources Projects, Water Rights, Hydro-politics and Trans-boundary Issues. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
3 | 8 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI431 | Hydraulic Structures (2) | 2 CH | |||||||||
Prerequisites | ( CEI332 ) AND ( CES361 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water Control System: Introduction – Main irrigation system – Flow control methods. Types of Hydraulic Structures: Non-regulating structures – Regulating structures. Percolation and Seepage: Piping below the floor – Uplift of the floor. Local Scour: Scouring mechanism – Scour protection. Weirs, Spillways and Escapes: Types and functions – Structural elements – Hydraulic design – Empirical dimensions – Principle design of the main elements – Calculations of hydraulic forces – Structural design of the floor – Design of scour protection – Engineering drawings. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI431s | Hydraulic Structures (2) | 2 CH | |||||||||
Prerequisites | ( CEI211s ) AND ( CES361s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water Control System: Introduction – Main irrigation system – Flow control methods. Types of Hydraulic Structures: Non-regulating structures – Regulating structures. Percolation and Seepage: Piping below the floor – Uplift of the floor. Local Scour: Scouring mechanism – Scour protection. Weirs, Spillways and Escapes: Types and functions – Structural elements – Hydraulic design – Empirical dimensions – Principle design of the main elements – Calculations of hydraulic forces – Structural design of the floor – Design of scour protection – Engineering drawings. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
5 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 15% | 0% | 50% |
CEI432 | Hydraulic Structures (3) | 2 CH | |||||||||
Prerequisites | ( CEI431 ) AND ( CES465 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Regulators and Intakes: Types and Functions – Classes of gates – Regulation by the gates – Hydraulic design – Structural elements – Empirical dimensions – Principle design of the main elements – Calculations of hydraulic forces – Structural design of the floor – Structural design of the gates – Design of Scour protection – Engineering drawings. Navigation Locks: Types and Functions – Filling and Emptying Process – Hydraulics of Locks – Structural elements – Empirical Dimensions – Principle design of the main elements – Calculations of hydraulic forces – Structural design of the thrust wall – Structural design of the floor – Engineering Drawings. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI432s | Hydraulic Structures (3) | 2 CH | |||||||||
Prerequisites | ( CEI431s ) AND ( CES465s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Regulators and Intakes: Types and Functions – Classes of gates – Regulation by the gates – Hydraulic design – Structural elements – Empirical dimensions – Principle design of the main elements – Calculations of hydraulic forces – Structural design of the floor – Structural design of the gates – Design of Scour protection – Engineering drawings. Navigation Locks: Types and Functions – Filling and Emptying Process – Hydraulics of Locks – Structural elements – Empirical Dimensions – Principle design of the main elements – Calculations of hydraulic forces – Structural design of the thrust wall – Structural design of the floor – Engineering Drawings. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
5 | 10 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 15% | 0% | 50% |
CEI433 | Dams Engineering | 2 CH | |||||||||
Prerequisites | ( CEI262 OR CEI361 ) AND ( CES361 OR CES364 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Reservoir planning: Investigation for reservoir planning, Selection of dam site, Zones of storage in Reservoirs, Storage Capacity and Yield, Sedimentation and Sediment Flow, Multipurpose Reservoirs. Dams: Different types of dams, Advantages and disadvantages of dams, Physical factors governing the selection of dams, Selection of site of a dam and its foundation, Gravity dams: Forces acting on gravity dams, Stability requirements, Elementary and practical profile of gravity dam, Height of gravity dam and its limitation, Methods of design, Dam Foundation treatment, Galleries and joints, Control of cracks in dams. Earth dams: Classification, Design considerations, Seepage in earth dams, design of filters, slope stability, critical cases of loading, failure of earth dams. Spillways: Types, Methods of design. Operation and Maintenance of Dams. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | 2 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI433s | Dams Engineering | 2 CH | |||||||||
Prerequisites | ( CEI262s OR CEI361s ) AND ( CES361s OR CES364s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Reservoir planning: Investigation for reservoir planning, Selection of dam site, Zones of storage in Reservoirs, Storage Capacity and Yield, Sedimentation and Sediment Flow, Multipurpose Reservoirs. Dams: Different types of dams, Advantages and disadvantages of dams, Physical factors governing the selection of dams, Selection of site of a dam and its foundation, Gravity dams: Forces acting on gravity dams, Stability requirements, Elementary and practical profile of gravity dam, Height of gravity dam and its limitation, Methods of design, Dam Foundation treatment, Galleries and joints, Control of cracks in dams. Earth dams: Classification, Design considerations, Seepage in earth dams, design of filters, slope stability, critical cases of loading, failure of earth dams. Spillways: Types, Methods of design. Operation and Maintenance of Dams. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
5 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI434 | Advanced Hydraulic Structures | 2 CH | |||||||||
Prerequisites | ( CEI431 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Modern Barrages: Aims and functionality – Main components (embankment dam, gated spillway, river hydropower plant and navigation lock) – Preliminary studies and investigations – Principle design of the main components – Engineering drawings – Physical modelling – Construction procedure. Operation and Maintenance: Operation guidelines – Common problems – Failure and emergency actions – Regular maintenance. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI434s | Advanced Hydraulic Structures | 2 CH | |||||||||
Prerequisites | ( CEI431s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Modern Barrages: Aims and functionality – Main components (embankment dam, gated spillway, river hydropower plant and navigation lock) – Preliminary studies and investigations – Principle design of the main components – Engineering drawings – Physical modelling – Construction procedure. Operation and Maintenance: Operation guidelines – Common problems – Failure and emergency actions – Regular maintenance. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI435 | Hydraulic Structures | 2 CH | |||||||||
Prerequisites | ( CEI333 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Weirs: Weirs function, types of weirs, hydraulic of weirs, stability of gravity weirs, static design of the floor for percolation, uplift and scour. Regulators: Types of regulators and component parts of the regulator, hydraulic design of the waterway, hydraulic and static design of piers under different cases of loading, static design of floor for percolation and scour, static design of vertical gates and winch structure. Radial Gates: Aims, functionality, components, type of radial gates, relations between gate opening and discharge, forces acting on gate and design aspect of gates. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
5 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI435s | Hydraulic Structures | 2 CH | |||||||||
Prerequisites | ( CEI333s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Weirs: Weirs function, types of weirs, hydraulic of weirs, stability of gravity weirs, static design of the floor for percolation, uplift and scour. Regulators: Types of regulators and component parts of the regulator, hydraulic design of the waterway, hydraulic and static design of piers under different cases of loading, static design of floor for percolation and scour, static design of vertical gates and winch structure. Radial Gates: Aims, functionality, components, type of radial gates, relations between gate opening and discharge, forces acting on gate and design aspect of gates. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI436 | Topics in Hydraulic Structures | 2 CH | |||||||||
Prerequisites | ( CEI333 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Spillways: Aims, functionality, classification, location, determination of the crest length and discharge capacity of the spillway, types of stilling basins, hydraulic jump and energy dissipation. Navigation Structures: Types of locks, main elements of locks, dimensioning of lock chamber, methods of emptying and filling the lock chamber, hydraulic design of side culverts, static design of: landing wall, guide pier, thrust wall and floor. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI436s | Topics in Hydraulic Structures | 2 CH | |||||||||
Prerequisites | ( CEI333s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Spillways: Aims, functionality, classification, location, determination of the crest length and discharge capacity of the spillway, types of stilling basins, hydraulic jump and energy dissipation. Navigation Structures: Types of locks, main elements of locks, dimensioning of lock chamber, methods of emptying and filling the lock chamber, hydraulic design of side culverts, static design of: landing wall, guide pier, thrust wall and floor. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI441 | Port Engineering and navigation | 2 CH | |||||||||
Prerequisites | ( CEI341 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Port Engineering, Port master planning, Design of Navigation Channels, Types of breakwaters, Design of breakwaters, Berthing facilities (quay walls types and their design), Vessels Mooring, Fenders, Repair Facilities, sheds, Introduction to Inland (river), Effect of ship movement in ports and navigation channels, Navigation Aids, Dredging, Planning and design of marinas. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI441s | Port Engineering and navigation | 2 CH | |||||||||
Prerequisites | ( CEI341s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Port Engineering, Port master planning, Design of Navigation Channels, Types of breakwaters, Design of breakwaters, Berthing facilities (quay walls types and their design), Vessels Mooring, Fenders, Repair Facilities, sheds, Introduction to Inland (river), Effect of ship movement in ports and navigation channels, Navigation Aids, Dredging, Planning and design of marinas. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
5 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI442 | Coastal Environment Engineering | 2 CH | |||||||||
Prerequisites | ( CEI341 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to coastal environment, problems facing coastal zone, human made shore protection structures and their impacts (bulkheads, seawalls, revetments, jetties, breakwaters, groins and geotextile sand containers), case studies and lessons learnt from Egypt coastal projects, environmental impact assessment of coastal projects, effect of global warming and sea level rise on coastal zones. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI442s | Coastal Environment Engineering | 2 CH | |||||||||
Prerequisites | ( CEI341s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to coastal environment, problems facing coastal zone, human made shore protection structures and their impacts (bulkheads, seawalls, revetments, jetties, breakwaters, groins and geotextile sand containers), case studies and lessons learnt from Egypt coastal projects, environmental impact assessment of coastal projects, effect of global warming and sea level rise on coastal zones. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
5 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI443 | Inland Navigation | 2 CH | |||||||||
Prerequisites | ( CEI441 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Types of navigation waterways, Importance of Inland Navigation, Hydraulic and morphodynamic phenomena in navigation channels, Specifications of vessels, Ship movements, Effect of ship movement on water motion, Design of navigable waterway cross section, Dikes and Revetments, Channel dredging and maintenance, inland ports master plan, berthing facilities, environmental aspects of inland waterways, Inland navigation in Egypt. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI443s | Inland Navigation | 2 CH | |||||||||
Prerequisites | ( CEI441s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Types of navigation waterways, Importance of Inland Navigation, Hydraulic and morphodynamic phenomena in navigation channels, Specifications of vessels, Ship movements, Effect of ship movement on water motion, Design of navigable waterway cross section, Dikes and Revetments, Channel dredging and maintenance, inland ports master plan, berthing facilities, environmental aspects of inland waterways, Inland navigation in Egypt. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI444 | Port Engineering and Shore Protection | 2 CH | |||||||||
Prerequisites | ( CEI211 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Natural phenomenon (winds, waves, tide, sea currents), Wave action and propagation (wave breaking, wave refraction), Wave Impact on Walls, Port master planning, Design of Navigation Channels, Design of breakwaters, Berthing facilities (quay walls types and their design), Vessels Mooring, Sediment transport, Shore Protection measures. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI444s | Port Engineering and Shore Protection | 2 CH | |||||||||
Prerequisites | ( CEI211s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Natural phenomenon (winds, waves, tide, sea currents), Wave action and propagation (wave breaking, wave refraction), Wave Impact on Walls, Port master planning, Design of Navigation Channels, Design of breakwaters, Berthing facilities (quay walls types and their design), Vessels Mooring, Sediment transport, Shore Protection measures. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Utilities and Infrastructure |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI451 | Ground Water Hydrology | 2 CH | |||||||||
Prerequisites | ( CEI111 OR CEI113 ) AND ( CES361 OR CES364 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction: Groundwater and hydrologic cycle, Importance of groundwater, the relation of groundwater to geologic structure, Types and physical properties of aquifers, Aquifer systems in Egypt. Groundwater exploration methods. Groundwater hydraulics: Infiltration, Seepage, Percolation, Darcy’s law, Hydraulic conductivity measurements, Flow governing equations. Well hydraulics: Flow towards wells, Safe yield, Well construction, well development and pumping tests. Well evaluation Introduction to Groundwater quality and pollution: Pollution sources, Mechanisms of pollutant transfer in porous media, saltwater intrusion in coastal aquifers, Pollution control and remedy measures. Introduction to Groundwater modelling: Mathematical, Physical and numerical models, Modelling of flow in porous media, Modelling of pollutant transfer in porous media. Introduction to management of groundwater systems. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
3 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI451s | Ground Water Hydrology | 2 CH | |||||||||
Prerequisites | ( CEI111s OR CEI113s ) AND ( CES361s OR CES364s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction: Groundwater and hydrologic cycle, Importance of groundwater, the relation of groundwater to geologic structure, Types and physical properties of aquifers, Aquifer systems in Egypt. Groundwater exploration methods. Groundwater hydraulics: Infiltration, Seepage, Percolation, Darcy’s law, Hydraulic conductivity measurements, Flow governing equations. Well hydraulics: Flow towards wells, Safe yield, Well construction, well development and pumping tests. Well evaluation Introduction to Groundwater quality and pollution: Pollution sources, Mechanisms of pollutant transfer in porous media, saltwater intrusion in coastal aquifers, Pollution control and remedy measures. Introduction to Groundwater modelling: Mathematical, Physical and numerical models, Modelling of flow in porous media, Modelling of pollutant transfer in porous media. Introduction to management of groundwater systems. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | 10 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI452 | Engineering Hydrology | 2 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI452s | Engineering Hydrology | 2 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI461 | Geographic Information Systems in water Engineering | 2 CH | |||||||||
Prerequisites | ( CEP212 OR CEP312 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 0 Hours | 2 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
The application of GIS technology to create solutions for water and environmental engineering problems is the main goal of this course. The course focuses generally on enhancing the spatial and spatiotemporal thinking of the students and their abilities to analyse and break down the spatial problem into GIS solutions. The contents of the course cover the concepts of GIS, data types, data sources, geo-referencing, coordinate systems and map projections, raster analysis and calculations, modelling in GIS environment, GIS applications in hydrology, GIS applications in infrastructure, GIS applications in irrigation and water resources management, general GIS applications in the planning/design and management of civil and environmental projects. The course tutorials provide students with technical skills and hands-on contact with GIS software via selected exercises and projects (both paper-based and computer based). | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 15% | 10% | 40% |
CEI461s | Geographic Information Systems in water Engineering | 2 CH | |||||||||
Prerequisites | ( CEP212s OR CEP312s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 0 Hours | 2 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
The application of GIS technology to create solutions for water and environmental engineering problems is the main goal of this course. The course focuses generally on enhancing the spatial and spatiotemporal thinking of the students and their abilities to analyse and break down the spatial problem into GIS solutions. The contents of the course cover the concepts of GIS, data types, data sources, geo-referencing, coordinate systems and map projections, raster analysis and calculations, modelling in GIS environment, GIS applications in hydrology, GIS applications in infrastructure, GIS applications in irrigation and water resources management, general GIS applications in the planning/design and management of civil and environmental projects. The course tutorials provide students with technical skills and hands-on contact with GIS software via selected exercises and projects (both paper-based and computer based). | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
5 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
40% | 0% | 10% | 50% |
CEI462 | Water Quality | 2 CH | |||||||||
Prerequisites | ( CEI361 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to water quality issues; Characteristics of surface waters and groundwater; Natural processes affecting water quality; Water use and water quality deterioration; Water and human health ; Basic concepts of surface and ground water quality modelling; Models of pollution transport; concepts of sediment quality in rivers and lakes; Solute transport; Nutrients and eutrophication; Toxic substances and sediments; Catchment water quality management ; Environmental impact of water pollution; design protocol and implementation of monitoring surface and groundwater; sampling and analytical methods; guidance on data analysis and presentation, water quality parameters and standard permissible limits. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI462s | Water Quality | 2 CH | |||||||||
Prerequisites | ( CEI361s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to water quality issues; Characteristics of surface waters and groundwater; Natural processes affecting water quality; Water use and water quality deterioration; Water and human health ; Basic concepts of surface and ground water quality modelling; Models of pollution transport; concepts of sediment quality in rivers and lakes; Solute transport; Nutrients and eutrophication; Toxic substances and sediments; Catchment water quality management ; Environmental impact of water pollution; design protocol and implementation of monitoring surface and groundwater; sampling and analytical methods; guidance on data analysis and presentation, water quality parameters and standard permissible limits. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI463 | Environmental Impact Assessment in water Engineering Projects | 2 CH | |||||||||
Prerequisites | ( CEI262 OR CEI361 ) AND ( CEI341 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction: Availability of natural resources, Natural cycles for some basic elements (carbon, oxygen, nitrogen, sulphur, phosphorous…). Conflicts between developments, Economics and environments. Defining emissions sources, Impacts, Standards and precautions. Water, Air and soil pollution and measurements. Historical development for recognizing the need for environmental impact assessment. Assessing the impacts on health, Social, Cultural and economic activities. Procedures of the environmental impact assessment: Screening, Scoping, Defining impacts, Comparing alternatives, Plans for mitigation and alleviation, Environmental auditing. Public participation. Environmental impact statement and reporting, Contents and forms. Impact assessment methods, check list, simple matrix, stepped matrix, loops and networks. Environmental management plan. Environmental law. Examples for assessing the impacts of water resources projects on the environment and impacts of different activities on the water environment. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI463s | Environmental Impact Assessment in water Engineering Projects | 2 CH | |||||||||
Prerequisites | ( CEI262s OR CEI361s ) AND ( CEI341s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction: Availability of natural resources, Natural cycles for some basic elements (carbon, oxygen, nitrogen, sulphur, phosphorous…). Conflicts between developments, Economics and environments. Defining emissions sources, Impacts, Standards and precautions. Water, Air and soil pollution and measurements. Historical development for recognizing the need for environmental impact assessment. Assessing the impacts on health, Social, Cultural and economic activities. Procedures of the environmental impact assessment: Screening, Scoping, Defining impacts, Comparing alternatives, Plans for mitigation and alleviation, Environmental auditing. Public participation. Environmental impact statement and reporting, Contents and forms. Impact assessment methods, check list, simple matrix, stepped matrix, loops and networks. Environmental management plan. Environmental law. Examples for assessing the impacts of water resources projects on the environment and impacts of different activities on the water environment. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI464 | Climate Change Adaptation in Water Resources field | 2 CH | |||||||||
Prerequisites | ( CEI361 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Hydrology and Water Resources, Introduction to climate change science and impacts in general, the factors responsible for climate change and the possible engineering solutions to avoid more extreme perturbations. Impacts of climate change on the hydrologic variations (floods, droughts, and sea level rise), Impacts of climate change on Water resources management (quantity and quality), Understanding Risk and vulnerability assessment of water resources due to climate changes, Identify and discuss water resources adaptation and strategies, Risk management and Risk reduction, Dealing with uncertainty, Protecting coasts, Adaptation to scarcity and changes in water availability, Examples for adaptation strategies. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI464s | Climate Change Adaptation in Water Resources field | 2 CH | |||||||||
Prerequisites | ( CEI361s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Hydrology and Water Resources, Introduction to climate change science and impacts in general, the factors responsible for climate change and the possible engineering solutions to avoid more extreme perturbations. Impacts of climate change on the hydrologic variations (floods, droughts, and sea level rise), Impacts of climate change on Water resources management (quantity and quality), Understanding Risk and vulnerability assessment of water resources due to climate changes, Identify and discuss water resources adaptation and strategies, Risk management and Risk reduction, Dealing with uncertainty, Protecting coasts, Adaptation to scarcity and changes in water availability, Examples for adaptation strategies. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI465 | Non-Conventional Water Resources | 2 CH | |||||||||
Prerequisites | ( CEI361 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
This course will focus on potential non-conventional water-resource applications such as; re-use and recycling of (urban wastewater and agricultural drainage water) brackish groundwater and seawater desalination (types, reverse osmosis plant configuration, intakes and outfalls, energy requirements, operation and maintenance), cloud seeding, and rain water harvesting (valley tanks, rock catchment, tanks and cisterns), and flood harvesting (sand dams, spate irrigation, and dams). | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI465s | Non-Conventional Water Resources | 2 CH | |||||||||
Prerequisites | ( CEI361s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
This course will focus on potential non-conventional water-resource applications such as; re-use and recycling of (urban wastewater and agricultural drainage water) brackish groundwater and seawater desalination (types, reverse osmosis plant configuration, intakes and outfalls, energy requirements, operation and maintenance), cloud seeding, and rain water harvesting (valley tanks, rock catchment, tanks and cisterns), and flood harvesting (sand dams, spate irrigation, and dams). | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI466 | Water Security and Governance | 2 CH | |||||||||
Prerequisites | ( CEI262 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
The issue of water security, national security, human health, and ecosystem services is currently receiving considerable attention. Water security index can be calculated based on include five main dimensions: households, socio-economy, urban cities, environment, and resilience to natural disasters. Water security usually can be achieved through the concept of Integrated water management, which demands a new framework within which there may be a need for significant changes in existing interactions between politics, laws, regulations, institutions, civil society, and the consumer-voter. The capacity to make these changes depends therefore on changes in governance. The course covers the topics related to water security and governance with applications and case studies from Egypt and other countries. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI466s | Water Security and Governance | 2 CH | |||||||||
Prerequisites | ( CEI262s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
The issue of water security, national security, human health, and ecosystem services is currently receiving considerable attention. Water security index can be calculated based on include five main dimensions: households, socio-economy, urban cities, environment, and resilience to natural disasters. Water security usually can be achieved through the concept of Integrated water management, which demands a new framework within which there may be a need for significant changes in existing interactions between politics, laws, regulations, institutions, civil society, and the consumer-voter. The capacity to make these changes depends therefore on changes in governance. The course covers the topics related to water security and governance with applications and case studies from Egypt and other countries. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI491 | Water Engineering Graduation Project | 6 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 12 Hours | 0 Hours | |||||||||
Required SWL | 300 | Equivalent ECTS | 12 | ||||||||
Course Content | |||||||||||
The student analyses and designs an integrated engineering system using the principles, foundations, and engineering skills that he acquired during the years of study. The project report submitted by the student should include the detailed steps of analysis and design realizing the requirements of the work and including the computer applications used in mathematical simulation for the designed system, and the laboratory tests if necessary. It also includes engineering drawings and maps needed to implement the designed system. The student must demonstrate in the body of his project, and during the project defence, his full understanding of the principles and foundations on which his project is based. He must also demonstrate ability to apply these principles in the field of his future engineering work. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI491s | Water Engineering Graduation Project | 6 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 12 Hours | 0 Hours | |||||||||
Required SWL | 300 | Equivalent ECTS | 12 | ||||||||
Course Content | |||||||||||
The student analyses and designs an integrated engineering system using the principles, foundations, and engineering skills that he acquired during the years of study. The project report submitted by the student should include the detailed steps of analysis and design realizing the requirements of the work and including the computer applications used in mathematical simulation for the designed system, and the laboratory tests if necessary. It also includes engineering drawings and maps needed to implement the designed system. The student must demonstrate in the body of his project, and during the project defence, his full understanding of the principles and foundations on which his project is based. He must also demonstrate ability to apply these principles in the field of his future engineering work. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | 10 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI492 | Civil Engineering Design Graduation Project (1) | 3 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
60% | 0% | 40% | 0% |
CEI492s | Civil Engineering Design Graduation Project (1) | 3 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
60% | % | % | 40% |
CEI493 | Civil Engineering Senior Seminar | 2 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
60% | 0% | 0% | 40% |
CEI493s | Civil Engineering Senior Seminar | 2 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
60% | % | % | 40% |
CEI494 | Civil Engineering Design Graduation Project (2) | 3 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
60% | 0% | 40% | 0% |
CEI494s | Civil Engineering Design Graduation Project (2) | 3 CH | |||||||||
Prerequisites | |||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
0 Hours | 0 Hours | 0 Hours | |||||||||
Required SWL | Equivalent ECTS | ||||||||||
Course Content | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
60% | % | % | 40% |
CEI111 | Fluid Mechanics | 2 CH | |||||||||
Prerequisites | ( PHM031 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Review of fluid properties: Definition, Characteristics of mass and weight, Viscosity, Vapor pressure, Surface tension, Compressibility. Fluid statics: Pressure, Pressure at a point, Pressure variation, Pressure transmission in fluids, Pressure measurements, Forces on plane and curved surfaces, Fluid masses subject to acceleration, Forced vortex, Buoyancy and floatation. Fluid Dynamics: Fundamentals of fluid flow, Classification of fluid flow, Continuity equation, Flow of ideal fluids, Euler's equation, Bernoulli's equation, flow of real fluids, Energy equation, T.E.L. and H.G.L. Applications of Bernoulli's equation. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI111s | Fluid Mechanics | 2 CH | |||||||||
Prerequisites | ( PHM031s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Review of fluid properties: Definition, Characteristics of mass and weight, Viscosity, Vapor pressure, Surface tension, Compressibility. Fluid statics: Pressure, Pressure at a point, Pressure variation, Pressure transmission in fluids, Pressure measurements, Forces on plane and curved surfaces, Fluid masses subject to acceleration, Forced vortex, Buoyancy and floatation. Fluid Dynamics: Fundamentals of fluid flow, Classification of fluid flow, Continuity equation, Flow of ideal fluids, Euler's equation, Bernoulli's equation, flow of real fluids, Energy equation, T.E.L. and H.G.L. Applications of Bernoulli's equation. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
General Civil Engineering |
1 | ||||||||||
Structural Engineering |
3 | ||||||||||
Water Engineering and Hydraulic Structures |
3 | ||||||||||
Utilities and Infrastructure |
3 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 10% | 50% |
CEI112 | Hydraulics (1) | 2 CH | |||||||||
Prerequisites | ( CEI111 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Review of Bernoulli’s equation and Energy equation, Applications of Bernoulli's equation. The Momentum equation: Development of the equation, Applications of the momentum equation. Pipe flow: Laminar and turbulent flow, Reynolds number, Shear stress distribution, Velocity distribution, Main losses, Secondary losses, Single pipe, Pipe connections (series and parallel), Pipe branching, Three tank problems. Pipe networks: Analysis of pipe networks, Hardy Cross method. Water hammer in pipes: Unsteady flow equations, Rigid water hammer theory, Elastic water hammer theory, Wave celerity, Water hammer effects and control. Dimensional analysis and Similitude. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI112s | Hydraulics (1) | 2 CH | |||||||||
Prerequisites | ( CEI111s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Review of Bernoulli’s equation and Energy equation, Applications of Bernoulli's equation. The Momentum equation: Development of the equation, Applications of the momentum equation. Pipe flow: Laminar and turbulent flow, Reynolds number, Shear stress distribution, Velocity distribution, Main losses, Secondary losses, Single pipe, Pipe connections (series and parallel), Pipe branching, Three tank problems. Pipe networks: Analysis of pipe networks, Hardy Cross method. Water hammer in pipes: Unsteady flow equations, Rigid water hammer theory, Elastic water hammer theory, Wave celerity, Water hammer effects and control. Dimensional analysis and Similitude. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
General Civil Engineering |
1 | ||||||||||
Structural Engineering |
4 | ||||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Utilities and Infrastructure |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 10% | 50% |
CEI113 | Fluid Mechanics for Civil Engineers | 3 CH | |||||||||
Prerequisites | ( PHM112 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 2 Hours | 2 Hours | |||||||||
Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
Course Content | |||||||||||
Review of fluid properties and hydrostatics: Manometry, Forces on plane and curved surfaces, Buoyancy, Fluid masses subjected to acceleration (forced vortex). Kinematics of fluid motion: Fluid flow, Types of flow, Classification of flow, Continuity equation. Flow of Incompressible fluid: One-dimensional flow, Euler's Equation in three dimensions, Bernoulli's, Energy equation, Applications of Bernoulli's equation (flow through free and submerged orifices, flow over notches and weirs flow measuring devices, time of filling and emptying tanks under variable and constant heads, free vortex). Pipe flow: Laminar and turbulent flow, Reynolds’ number, Shear stress distribution, Velocity distribution, Main losses, Secondary losses, Single pipe, Pipe connections (parallel and series), Pipe branching, Three tank problems. The Impulse-Momentum principle: Development of the principle, Pipe bends, Enlargements and contractions, Hydraulic structures in open channels. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
1 | 4 | |||||||||
Building Engineering |
2 | 4 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 15% | 40% |
CEI113s | Fluid Mechanics for Civil Engineers | 3 CH | |||||||||
Prerequisites | ( PHM112s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 2 Hours | 2 Hours | |||||||||
Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
Course Content | |||||||||||
Review of fluid properties and hydrostatics: Manometry, Forces on plane and curved surfaces, Buoyancy, Fluid masses subjected to acceleration (forced vortex). Kinematics of fluid motion: Fluid flow, Types of flow, Classification of flow, Continuity equation. Flow of Incompressible fluid: One-dimensional flow, Euler's Equation in three dimensions, Bernoulli's, Energy equation, Applications of Bernoulli's equation (flow through free and submerged orifices, flow over notches and weirs flow measuring devices, time of filling and emptying tanks under variable and constant heads, free vortex). Pipe flow: Laminar and turbulent flow, Reynolds’ number, Shear stress distribution, Velocity distribution, Main losses, Secondary losses, Single pipe, Pipe connections (parallel and series), Pipe branching, Three tank problems. The Impulse-Momentum principle: Development of the principle, Pipe bends, Enlargements and contractions, Hydraulic structures in open channels. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 20% | 15% | 40% |
CEI211 | Hydraulics (2) | 2 CH | |||||||||
Prerequisites | ( CEI112 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Hydraulic machines: Introduction, Types of pumps, System characteristics, Pump characteristics and performance, Operation of pumps, Pump selection, Multiple pump system, Cavitation phenomena. Open channel flow: Introduction, Types of open channel flow, States of open channel flow, Geometric elements of channel sections, Velocity distribution in open channels, Equations for uniform steady flow in open channels, Factors affecting Roughness coefficient, Design of open channels sections, Energy equation in open channels, Specific energy, Specific discharge, Applications of the specific energy, Specific force, Specific force diagram, Rapidly varied flow, Gradually varied flow, Methods of computation for gradually varied flow. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI211s | Hydraulics (2) | 2 CH | |||||||||
Prerequisites | ( CEI112s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Hydraulic machines: Introduction, Types of pumps, System characteristics, Pump characteristics and performance, Operation of pumps, Pump selection, Multiple pump system, Cavitation phenomena. Open channel flow: Introduction, Types of open channel flow, States of open channel flow, Geometric elements of channel sections, Velocity distribution in open channels, Equations for uniform steady flow in open channels, Factors affecting Roughness coefficient, Design of open channels sections, Energy equation in open channels, Specific energy, Specific discharge, Applications of the specific energy, Specific force, Specific force diagram, Rapidly varied flow, Gradually varied flow, Methods of computation for gradually varied flow. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
General Civil Engineering |
1 | ||||||||||
Structural Engineering |
5 | ||||||||||
Water Engineering and Hydraulic Structures |
5 | ||||||||||
Utilities and Infrastructure |
5 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 10% | 50% |
CEI212 | Hydraulics | 3 CH | |||||||||
Prerequisites | ( CEI113 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 2 Hours | 2 Hours | |||||||||
Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
Course Content | |||||||||||
Pipe networks: Analysis, Design and optimal design. Water hammer in pipes: Unsteady flow equations, Rigid water hammer theory, Elastic water hammer theory, Wave celerity, Water hammer effects and control. Dimensional analysis and Similitude. Hydraulic machines: Introduction, Types of pumps, System characteristics, Pump characteristics and performance, Operation of pumps, Pump selection, Multiple pump system, Cavitation phenomena. Open channel flow: Introduction, Types of open channel flow, States of open channel flow, Geometric elements of channel sections, Velocity distribution in open channels, Equations for uniform steady flow in open channels, Factors affecting Roughness coefficient, Design of open channels sections, Energy equation in open channels, Specific energy, Specific discharge, Applications of the specific energy, Specific force, Specific force diagram, Rapidly varied flow, Gradually varied flow, Methods of computation for gradually varied flow. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
2 | 5 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 15% | 40% |
CEI212s | Hydraulics | 3 CH | |||||||||
Prerequisites | ( CEI113s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 2 Hours | 2 Hours | |||||||||
Required SWL | 150 | Equivalent ECTS | 6 | ||||||||
Course Content | |||||||||||
Pipe networks: Analysis, Design and optimal design. Water hammer in pipes: Unsteady flow equations, Rigid water hammer theory, Elastic water hammer theory, Wave celerity, Water hammer effects and control. Dimensional analysis and Similitude. Hydraulic machines: Introduction, Types of pumps, System characteristics, Pump characteristics and performance, Operation of pumps, Pump selection, Multiple pump system, Cavitation phenomena. Open channel flow: Introduction, Types of open channel flow, States of open channel flow, Geometric elements of channel sections, Velocity distribution in open channels, Equations for uniform steady flow in open channels, Factors affecting Roughness coefficient, Design of open channels sections, Energy equation in open channels, Specific energy, Specific discharge, Applications of the specific energy, Specific force, Specific force diagram, Rapidly varied flow, Gradually varied flow, Methods of computation for gradually varied flow. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 20% | 15% | 40% |
CEI311 | Infrastructure Planning and Landscape Irrigation | 2 CH | |||||||||
Prerequisites | ( PHM022 ) AND ( PHM032 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 2 Hours | 0 Hours | |||||||||
Required SWL | 75 | Equivalent ECTS | 3 | ||||||||
Course Content | |||||||||||
Introduction to Urban Water Systems, Water distribution network design and operation, Potable water demand, Wastewater collection networks, Gray Water concept, Storm Water drainage systems, Combined sewerage networks. Soil-plant-water relationships. Irrigation water requirements, irrigation efficiency and calculating periods between irrigations, flow rates and irrigation time. sprinkler and drip irrigation, subsurface irrigation. Geometric Road design, signing and marking, Street and landscape lighting, power supply networks, CCTV, Gas, and telecommunication. Infrastructure planning, Infrastructures Impact on the environment, public health and safety. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Landscape Architecture |
3 | 7 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI311s | Infrastructure Planning and Landscape Irrigation | 2 CH | |||||||||
Prerequisites | ( PHM022s ) AND ( PHM032s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 2 Hours | 0 Hours | |||||||||
Required SWL | 75 | Equivalent ECTS | 3 | ||||||||
Course Content | |||||||||||
Introduction to Urban Water Systems, Water distribution network design and operation, Potable water demand, Wastewater collection networks, Gray Water concept, Storm Water drainage systems, Combined sewerage networks. Soil-plant-water relationships. Irrigation water requirements, irrigation efficiency and calculating periods between irrigations, flow rates and irrigation time. sprinkler and drip irrigation, subsurface irrigation. Geometric Road design, signing and marking, Street and landscape lighting, power supply networks, CCTV, Gas, and telecommunication. Infrastructure planning, Infrastructures Impact on the environment, public health and safety. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI411 | Hydraulic Networks | 3 CH | |||||||||
Prerequisites | ( CEI211 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 2 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Pressurized networks: Graph theory, Branched network, System reliability, Governing equations, Analysis techniques, Unsteady flow boundaries, Extended period simulation, Case Studies. Pumping stations, Transmission lines, Practical consideration (control valves, water hammer protection devices, field testing, and leakage control), Commercial software, Case Studies. Gravity networks; understanding of the basic principles and knowledge for the planning, design of urban drainage and sewerage systems, inputs and outputs and functioning of urban drainage/sewerage systems, hydraulic analysis for the steady and unsteady state. Commercial software. Case Studies. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI411s | Hydraulic Networks | 3 CH | |||||||||
Prerequisites | ( CEI211s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 2 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Pressurized networks: Graph theory, Branched network, System reliability, Governing equations, Analysis techniques, Unsteady flow boundaries, Extended period simulation, Case Studies. Pumping stations, Transmission lines, Practical consideration (control valves, water hammer protection devices, field testing, and leakage control), Commercial software, Case Studies. Gravity networks; understanding of the basic principles and knowledge for the planning, design of urban drainage and sewerage systems, inputs and outputs and functioning of urban drainage/sewerage systems, hydraulic analysis for the steady and unsteady state. Commercial software. Case Studies. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | 9 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 15% | 15% | 50% |
CEI412 | Pump Stations Engineering | 2 CH | |||||||||
Prerequisites | ( CEI211 OR CEI212 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Pump performance curves: Speed effect, Impeller changes effect, Type of pump effect, Viscosity effect, Cavitation effect, Net positive suction head effect, Available suction head effect, and Required suction head effect. Pump definition: General- service pumps, Booster pumps, Non-clogging pumps, Sump pumps, Dredge pumps, Slurry pumps, Deep-well pumps, Water-works irrigation and drainage pumps, Circulating pumps. Pump-pipeline system: pump characteristic curves, system curves, operation point and Total head, Total dynamic head, System friction-head curve, Approximated operating head, Pumps operating in series, Pumps operating in parallel. Pump application: Pumping arrangement, Economic consideration. Pump selection, Pump Installation, Location of pump units, Suction line inlet, Size of suction line, Long-radius elbows, Suction header, Eccentric reducers, Screens, Check valves, Expansion joints, Vent valves, Realigned in field, Pump levelling. Operation: gate valve, Priming, Foot valve, Priming chamber, Ejectors, Dry-vacuum pump, Wet-vacuum pump, Automatically priming pump, Time of priming, Sump-pump design. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI412s | Pump Stations Engineering | 2 CH | |||||||||
Prerequisites | ( CEI211s OR CEI212s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Pump performance curves: Speed effect, Impeller changes effect, Type of pump effect, Viscosity effect, Cavitation effect, Net positive suction head effect, Available suction head effect, and Required suction head effect. Pump definition: General- service pumps, Booster pumps, Non-clogging pumps, Sump pumps, Dredge pumps, Slurry pumps, Deep-well pumps, Water-works irrigation and drainage pumps, Circulating pumps. Pump-pipeline system: pump characteristic curves, system curves, operation point and Total head, Total dynamic head, System friction-head curve, Approximated operating head, Pumps operating in series, Pumps operating in parallel. Pump application: Pumping arrangement, Economic consideration. Pump selection, Pump Installation, Location of pump units, Suction line inlet, Size of suction line, Long-radius elbows, Suction header, Eccentric reducers, Screens, Check valves, Expansion joints, Vent valves, Realigned in field, Pump levelling. Operation: gate valve, Priming, Foot valve, Priming chamber, Ejectors, Dry-vacuum pump, Wet-vacuum pump, Automatically priming pump, Time of priming, Sump-pump design. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI413 | Environmental Hydraulics | 2 CH | |||||||||
Prerequisites | ( CEI262 OR CEI361 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water flow in the environment – phenomena and processes related to such flow. Transport processes and spreading of pollutants. Material Balance equations for water and pollutants in surface water systems with instantaneous mixing. Piston flow and nominal retention time. Basic mechanisms for mixing: diffusion (laminar and turbulent), dispersion, and advection. The general transport (advection-diffusion) equation – formulation and special cases. Mixing in rivers, lakes, and coastal areas. Jets and plumes (free shear flows). Near- and far field mixing. Diffusers and other technical solutions for pollution discharge. Steady and unsteady flow conditions. Case studies concerning pollution discharge and environmental impact. Density-driven flows including stratification and horizontal spreading of pollutants. Temperature and oxygen conditions in natural waters together with governing equations. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI413s | Environmental Hydraulics | 2 CH | |||||||||
Prerequisites | ( CEI262s OR CEI361s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Water flow in the environment – phenomena and processes related to such flow. Transport processes and spreading of pollutants. Material Balance equations for water and pollutants in surface water systems with instantaneous mixing. Piston flow and nominal retention time. Basic mechanisms for mixing: diffusion (laminar and turbulent), dispersion, and advection. The general transport (advection-diffusion) equation – formulation and special cases. Mixing in rivers, lakes, and coastal areas. Jets and plumes (free shear flows). Near- and far field mixing. Diffusers and other technical solutions for pollution discharge. Steady and unsteady flow conditions. Case studies concerning pollution discharge and environmental impact. Density-driven flows including stratification and horizontal spreading of pollutants. Temperature and oxygen conditions in natural waters together with governing equations. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 20% | 0% | 50% |
CEI414 | River Engineering | 2 CH | |||||||||
Prerequisites | ( CEI351 OR CEI352 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Basic properties and principle equations: properties of water and sediments, river flow kinematics, mass conservation, equation of motion. Steady and unsteady flow in rivers, sediment transport in rivers. –River equilibrium: particle stability, channel stability, river bends, river meander. Stage discharge predictors - Sediment discharge formulas – Sediment measurements techniques. River stabilization: river bank protection, river bank riprap revetment; navigation waterways; River training; River restoration principles: Case studies. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
5 | 10 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI414s | River Engineering | 2 CH | |||||||||
Prerequisites | ( CEI351s OR CEI352s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Basic properties and principle equations: properties of water and sediments, river flow kinematics, mass conservation, equation of motion. Steady and unsteady flow in rivers, sediment transport in rivers. –River equilibrium: particle stability, channel stability, river bends, river meander. Stage discharge predictors - Sediment discharge formulas – Sediment measurements techniques. River stabilization: river bank protection, river bank riprap revetment; navigation waterways; River training; River restoration principles: Case studies. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
50% | 0% | 0% | 50% |
CEI415 | Lab and Field Measurements in Water Resources field | 2 CH | |||||||||
Prerequisites | ( CEI351 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Build level of competence with instruments, field techniques, sampling basis, data analysis techniques. Measuring climatic parameters, surface hydrological parameters, ground water parameters, stream flow, channel cross-section, rating curves. Measuring devices for special water structures. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI415s | Lab and Field Measurements in Water Resources field | 2 CH | |||||||||
Prerequisites | ( CEI351s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Build level of competence with instruments, field techniques, sampling basis, data analysis techniques. Measuring climatic parameters, surface hydrological parameters, ground water parameters, stream flow, channel cross-section, rating curves. Measuring devices for special water structures. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
40% | 10% | 0% | 50% |
CEI416 | Hydraulic Modeling | 2 CH | |||||||||
Prerequisites | ( CEI341 ) AND ( CEI352 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Models-reality approximations, Different types of Models (Lumped, distributed models). 1D, 2D, and 3D Models. Limitations and constrains, Boundary conditions, Water Networks modelling, Hydrologic Modelling, Open channel/River flow modelling, groundwater modelling. Case studies. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI416s | Hydraulic Modeling | 2 CH | |||||||||
Prerequisites | ( CEI341s ) AND ( CEI352s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Models-reality approximations, Different types of Models (Lumped, distributed models). 1D, 2D, and 3D Models. Limitations and constrains, Boundary conditions, Water Networks modelling, Hydrologic Modelling, Open channel/River flow modelling, groundwater modelling. Case studies. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI417 | Sustainable Urban Water Systems | 2 CH | |||||||||
Prerequisites | ( CEI212 ) AND ( CEI352 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Urban Water Systems, Water quality and quantity objectives/risks, Water distribution network design and operation, Leakage control, Potable water demand management, Wastewater collection and reuse networks, Gray Water concept, Storm water drainage systems, Combined sewerage networks, Urban Storm management, The qualitative characteristics of a sustainable system (including social, environmental and economic factors),Tackling water shortages through controlling water demand, investments in increasing water distribution efficiency and utilization of reclaimed water and rainwater. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI417s | Sustainable Urban Water Systems | 2 CH | |||||||||
Prerequisites | ( CEI212s ) AND ( CEI352s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Introduction to Urban Water Systems, Water quality and quantity objectives/risks, Water distribution network design and operation, Leakage control, Potable water demand management, Wastewater collection and reuse networks, Gray Water concept, Storm water drainage systems, Combined sewerage networks, Urban Storm management, The qualitative characteristics of a sustainable system (including social, environmental and economic factors),Tackling water shortages through controlling water demand, investments in increasing water distribution efficiency and utilization of reclaimed water and rainwater. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI221 | Irrigation and Drainage Engineering | 4 CH | |||||||||
Prerequisites | ( CEI211 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
3 Hours | 2 Hours | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Getting down to Engineering Hydrology and Water Resources Engineering (Hydrologic cycle. Hydrometrology – Surface runoff – Hydrographs – Storage and demand curves). Getting Down to Irrigation and Drainage Engineering. Soil-Plant-Water relationships. Irrigation water requirements. Irrigation efficiency. Irrigation period. Irrigation interval. Planning, Design, Management and Operation for field Irrigation (Surface irrigation - Sprinkler Irrigation - Local irrigation). Irrigation system in Egypt (Irrigation schedules - Cropping pattern – Turn system - Field and canal water duties). Introduction to groundwater (Sources - Characteristics and movement - Well design and selection of pumps). Drainage Engineering (Types of drainage systems - Factors affecting type selection - Design of open, tile and vertical drains - Disposal of drainage water and drainage water reuse and precautions). Water Strategy with application to the Egyptian case. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI221s | Irrigation and Drainage Engineering | 4 CH | |||||||||
Prerequisites | ( CEI211s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
3 Hours | 2 Hours | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Getting down to Engineering Hydrology and Water Resources Engineering (Hydrologic cycle. Hydrometrology – Surface runoff – Hydrographs – Storage and demand curves). Getting Down to Irrigation and Drainage Engineering. Soil-Plant-Water relationships. Irrigation water requirements. Irrigation efficiency. Irrigation period. Irrigation interval. Planning, Design, Management and Operation for field Irrigation (Surface irrigation - Sprinkler Irrigation - Local irrigation). Irrigation system in Egypt (Irrigation schedules - Cropping pattern – Turn system - Field and canal water duties). Introduction to groundwater (Sources - Characteristics and movement - Well design and selection of pumps). Drainage Engineering (Types of drainage systems - Factors affecting type selection - Design of open, tile and vertical drains - Disposal of drainage water and drainage water reuse and precautions). Water Strategy with application to the Egyptian case. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
General Civil Engineering |
2 | ||||||||||
Structural Engineering |
6 | ||||||||||
Water Engineering and Hydraulic Structures |
6 | ||||||||||
Utilities and Infrastructure |
6 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 0% | 60% |
CEI222 | Irrigation and Drainage | 3 CH | |||||||||
Prerequisites | ( CEI212 ) AND ( CEI262 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 2 Hours | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Soil-plant-water relationships. Determination of plant water consumption. Fundamentals of irrigation and drainage engineering. Planning and design of farm irrigation systems: Surface irrigation system, Pipe irrigation system, Sprinkler irrigation system, Trickle irrigation system. Flow measurements and pump selection and operation. Subsurface flow of free drainage water. Planning and design of drainage systems: Open drainage system, Tile drainage system. Functions of Irrigation and Drainage structures. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
2 | 6 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI222s | Irrigation and Drainage | 3 CH | |||||||||
Prerequisites | ( CEI212s ) AND ( CEI262s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 2 Hours | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Soil-plant-water relationships. Determination of plant water consumption. Fundamentals of irrigation and drainage engineering. Planning and design of farm irrigation systems: Surface irrigation system, Pipe irrigation system, Sprinkler irrigation system, Trickle irrigation system. Flow measurements and pump selection and operation. Subsurface flow of free drainage water. Planning and design of drainage systems: Open drainage system, Tile drainage system. Functions of Irrigation and Drainage structures. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI321 | Modern Irrigation Systems | 2 CH | |||||||||
Prerequisites | ( CEI222 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Revision of on-farm irrigation systems. Planning and design of new trends in on-farm irrigation systems: Surge surface irrigation, Subsurface irrigation, Subsurface trickle irrigation. Irrigation system control: Concentration control (injection and mixing), Hydraulic control (discharge and pressure measurements, use of control valves: close, air, wash, pressure relief, constant pressure, constant discharge, non-return, sustaining pressure). Design and construction of lined irrigation canals. Managements and administrative aspects: Stages of irrigation projects, Economics of irrigation systems and feasibility study. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
3 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI321s | Modern Irrigation Systems | 2 CH | |||||||||
Prerequisites | ( CEI222s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Revision of on-farm irrigation systems. Planning and design of new trends in on-farm irrigation systems: Surge surface irrigation, Subsurface irrigation, Subsurface trickle irrigation. Irrigation system control: Concentration control (injection and mixing), Hydraulic control (discharge and pressure measurements, use of control valves: close, air, wash, pressure relief, constant pressure, constant discharge, non-return, sustaining pressure). Design and construction of lined irrigation canals. Managements and administrative aspects: Stages of irrigation projects, Economics of irrigation systems and feasibility study. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 25% | 0% | 40% |
CEI421 | Sustainable Drainage Systems | 2 CH | |||||||||
Prerequisites | ( CEI351 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Concepts of agriculture drainage systems; drainage as an important means to sustain irrigated agriculture, Water balance, Subsurface flow to drains (steady and unsteady state equations - application - comparison – special drainage situations), drainage and salinity (soil salinity - salt balance in root zone - salinization due to capillary rise - fallow period), Drainage water quality and relation with irrigation water and practices - methods of improving and re-using agriculture drainage water quality, drains’ gravity outlet structures. Urban Storm water drainage; methods of improving urban water quality, Sustainable Urban Drainage Systems (SUDS), the role of drainage in protecting human health, Strategies for achieving sustainability through drainage, re-use of drainage water (constraints and opportunities). | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI421s | Sustainable Drainage Systems | 2 CH | |||||||||
Prerequisites | ( CEI351s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Concepts of agriculture drainage systems; drainage as an important means to sustain irrigated agriculture, Water balance, Subsurface flow to drains (steady and unsteady state equations - application - comparison – special drainage situations), drainage and salinity (soil salinity - salt balance in root zone - salinization due to capillary rise - fallow period), Drainage water quality and relation with irrigation water and practices - methods of improving and re-using agriculture drainage water quality, drains’ gravity outlet structures. Urban Storm water drainage; methods of improving urban water quality, Sustainable Urban Drainage Systems (SUDS), the role of drainage in protecting human health, Strategies for achieving sustainability through drainage, re-use of drainage water (constraints and opportunities). | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
35% | 15% | 0% | 50% |
CEI422 | Advanced Irrigation Engineering | 2 CH | |||||||||
Prerequisites | ( CEI331 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Part (1): On-Farm Advanced Irrigation: Review (surface irrigation - sprinkler irrigation - drip irrigation and evaluation of performance). Planning, design, and management, Operation and Maintenance of modern on-farm irrigation systems (surge irrigation - subsurface irrigation – micro sprinklers - trickle subsurface irrigation …), practical considerations when selecting different irrigation methods. Applications of irrigation systems in landscape of urban zones. Hydraulic control of irrigation systems. Part (2): Delivery Systems: Operation and control concepts in irrigation networks, Review (planning, design, construction, Operation and Maintenance of canals with application under the Egyptian case). Lining of irrigation canals (infiltration - economics – types and materials - practical examples). Maintenance of branch and main canals (objectives - types - responsibilities - planning and scheduling - financial management - practical examples). | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI422s | Advanced Irrigation Engineering | 2 CH | |||||||||
Prerequisites | ( CEI331s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Part (1): On-Farm Advanced Irrigation: Review (surface irrigation - sprinkler irrigation - drip irrigation and evaluation of performance). Planning, design, and management, Operation and Maintenance of modern on-farm irrigation systems (surge irrigation - subsurface irrigation – micro sprinklers - trickle subsurface irrigation …), practical considerations when selecting different irrigation methods. Applications of irrigation systems in landscape of urban zones. Hydraulic control of irrigation systems. Part (2): Delivery Systems: Operation and control concepts in irrigation networks, Review (planning, design, construction, Operation and Maintenance of canals with application under the Egyptian case). Lining of irrigation canals (infiltration - economics – types and materials - practical examples). Maintenance of branch and main canals (objectives - types - responsibilities - planning and scheduling - financial management - practical examples). | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
40% | 0% | 0% | 60% |
CEI131 | Civil Drawing | 2 CH | |||||||||
Prerequisites | ( CEP011 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 3 Hours | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Irrigation Works: Introduction to Irrigation works, Earthworks (Open Channels cross sections and projections/ changes in Bed, Berm, and Bank levels / Rotation and ends of canals), Retaining walls and abutments (types and its relationship with earth), Water structures (Crossing works, Heading up works, Canal ends works) Steel structures: Introduction to steel structures, Steel sections, Bases and columns, Beams and Girders, steel bridge connections | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI131s | Civil Drawing | 2 CH | |||||||||
Prerequisites | ( CEP011s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 3 Hours | 0 Hours | |||||||||
Required SWL | 125 | Equivalent ECTS | 5 | ||||||||
Course Content | |||||||||||
Irrigation Works: Introduction to Irrigation works, Earthworks (Open Channels cross sections and projections/ changes in Bed, Berm, and Bank levels / Rotation and ends of canals), Retaining walls and abutments (types and its relationship with earth), Water structures (Crossing works, Heading up works, Canal ends works) Steel structures: Introduction to steel structures, Steel sections, Bases and columns, Beams and Girders, steel bridge connections | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
General Civil Engineering |
1 | ||||||||||
Structural Engineering |
4 | ||||||||||
Water Engineering and Hydraulic Structures |
4 | ||||||||||
Utilities and Infrastructure |
4 | ||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI132 | Civil Engineering Drawing | 2 CH | |||||||||
Prerequisites | ( CEP011 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 3 Hours | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Fundamentals of technical drawing, orthographic projections, sectional views. Computer-aided drawing; Concrete structures; slabs, beams, and columns, Steel structures; building trusses and bridges. Irrigation Works; introduction to Irrigation works; Earthworks (Open Channels cross sections and projections/ changes in Bed, Berm, and Bank levels / Rotation and ends of canals), Retaining walls and abutments (types and its relationship with earth). Irrigation structures (Crossing works, heading up works, Canal ends works). Introduction to the design process. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
2 | 3 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
20% | 20% | 15% | 40% |
CEI132s | Civil Engineering Drawing | 2 CH | |||||||||
Prerequisites | ( CEP011s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
1 Hour | 3 Hours | 1 Hour | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Fundamentals of technical drawing, orthographic projections, sectional views. Computer-aided drawing; Concrete structures; slabs, beams, and columns, Steel structures; building trusses and bridges. Irrigation Works; introduction to Irrigation works; Earthworks (Open Channels cross sections and projections/ changes in Bed, Berm, and Bank levels / Rotation and ends of canals), Retaining walls and abutments (types and its relationship with earth). Irrigation structures (Crossing works, heading up works, Canal ends works). Introduction to the design process. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 20% | 15% | 40% |
CEI331 | Design of Irrigation Works | 2 CH | |||||||||
Prerequisites | ( CEI221 ) AND ( CES262 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Planning and design of Irrigation projects: Alignment of canals and drains, Synoptic diagrams for canals and drains, Design of cross sections for earth channels, Seepage through earth channels, Calculation of expropriation widths, Longitudinal sections and typical cross sections for canals and drains, Canal lining. Retaining walls: Types, Stability, Cases of loading, Hydraulic and structural design, Drawings. Classification of irrigation structures. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI331s | Design of Irrigation Works | 2 CH | |||||||||
Prerequisites | ( CEI211s ) AND ( CES262s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Planning and design of Irrigation projects: Alignment of canals and drains, Synoptic diagrams for canals and drains, Design of cross sections for earth channels, Seepage through earth channels, Calculation of expropriation widths, Longitudinal sections and typical cross sections for canals and drains, Canal lining. Retaining walls: Types, Stability, Cases of loading, Hydraulic and structural design, Drawings. Classification of irrigation structures. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
4 | 7 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI332 | Hydraulic Structures (1) | 2 CH | |||||||||
Prerequisites | ( CEI131 ) AND ( CEI331 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Classification of crossing structures – Bridges on waterways: types, hydraulic design, heading-up calculations, bridge scour calculations and scour countermeasures, empirical dimensions, drawings. Culverts: types, culvert hydraulics, hydraulic design of culverts, scour calculations, empirical dimensions, drawings, loads calculations for the different cases of loading. Syphons and Aqueducts: hydraulic design, drawings, calculation of loads for the determined cases of loading. | |||||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
15% | 25% | 10% | 40% |
CEI332s | Hydraulic Structures (1) | 2 CH | |||||||||
Prerequisites | ( CEI131s ) AND ( CEI211s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Classification of crossing structures – Bridges on waterways: types, hydraulic design, heading-up calculations, bridge scour calculations and scour countermeasures, empirical dimensions, drawings. Culverts: types, culvert hydraulics, hydraulic design of culverts, scour calculations, empirical dimensions, drawings, loads calculations for the different cases of loading. Syphons and Aqueducts: hydraulic design, drawings, calculation of loads for the determined cases of loading. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Water Engineering and Hydraulic Structures |
3 | 8 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |
CEI333 | Design of Irrigation Structures | 2 CH | |||||||||
Prerequisites | ( CEI131 OR CEI132 ) AND ( CEI221 OR CEI222 ) AND ( CEP211 OR CEP214 ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Planning and design of Irrigation projects: Alignment of canals and drains, Synoptic diagrams, Design of cross sections, Longitudinal sections and typical cross sections - Retaining walls – Crossing Structures: Hydraulic design, Scour calculations and Drawings of Bridges on waterways, Culverts, Syphons and Aqueducts. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Civil Infrastructure Engineering |
4 | 7 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
30% | 25% | 0% | 40% |
CEI333s | Design of Irrigation Structures | 2 CH | |||||||||
Prerequisites | ( CEI131s ) AND ( CEI211s ) AND ( CES262s ) | ||||||||||
Number of weekly Contact Hours | |||||||||||
Lecture | Tutorial | Laboratory | |||||||||
2 Hours | 1 Hour | 0 Hours | |||||||||
Required SWL | 100 | Equivalent ECTS | 4 | ||||||||
Course Content | |||||||||||
Planning and design of Irrigation projects: Alignment of canals and drains, Synoptic diagrams, Design of cross sections, Longitudinal sections and typical cross sections - Retaining walls – Crossing Structures: Hydraulic design, Scour calculations and Drawings of Bridges on waterways, Culverts, Syphons and Aqueducts. | |||||||||||
Used in Program / Level | |||||||||||
Program Name or requirement | Study Level | Semester | |||||||||
Structural Engineering |
3 | 7 | |||||||||
Assessment Criteria | |||||||||||
Student Activities | Mid-Term Exam | Oral/Practical | Final Exam | ||||||||
25% | 25% | 0% | 50% |