كلية الهندسة - جامعة عين شمس, الرئيسية

الرئيسية  >  كلية الهندسة - جامعة عين شمس, الرئيسية

Design of Tools and Production Facilities

What Will Learn?

  • Course Aims
    • Demonstrate knowledge and understanding of jigs, fixtures, cutting tool design. • Represent the different techniques of tool designs. • Recognize and calculate the different types of clamping and cutting forces during machining. • Formulate the stresses and deflection due to the clamping and cutting forces. • construct the jig, fixture, and cutting tool.
  • Course Goals
  • Industry, Innovation and Infrastructure

Requirements

MDP382s

Description

  • English Description

    Design of Tools: Cutting tool material. Structure and sharpening of single point tools, twist drill tools, milling cutter, gear cutting tools. Design, manufacturing and sharpening of special cutting tools such as, form turning tools, form relieved milling cutters, and broaching tools. Production Facilities: Design and manufacturing of workpiece fixture. Principle of location, Types of clamping and calculations of clamping forces. Design of drilling jig, milling fixture, turning fixture, welding fixture, assembly fixture.
  • Arabic Description

    Design of Tools: Cutting tool material. Structure and sharpening of single point tools, twist drill tools, milling cutter, gear cutting tools. Design, manufacturing and sharpening of special cutting tools such as, form turning tools, form relieved milling cutters, and broaching tools. Production Facilities: Design and manufacturing of workpiece fixture. Principle of location, Types of clamping and calculations of clamping forces. Design of drilling jig, milling fixture, turning fixture, welding fixture, assembly fixture.
  • قسم
    التصميم وهندسة الإنتاج
  • الساعات المعتمدة
    2
  • الدرجات
    الإجمالي ( 100 ) = نصف العام (20) + tr.Student Activities (20 = tr.Industry 0% , tr.Project 5% , tr.Self_learning 10% , tr.Seminar 5% ) + درجة الامتحان (60)
  • الساعات
    ساعات المحاضرة: 2, ساعات التعليم: 1, ساعات المعمل: 0
  • Required SWL
    75
  • Equivalent ECTS
    3
  • Lecture notes
  • "An Introduction to Jig and Tool Design", M. H. A. Kempster, ELBS, 1974.
  • "Principles of Jig and Tool Design", M.. H. A. Kempster, The English University Press LTD,1968
  • "Fundamentals of tool design", SME, USA, 2010.
  • " Metal Cutting", Edward M. Trent, Butterworth-Heinemaman, 3rd edition, June 2015 - An Introduction to Jig and Tool Design, M. H. A. Kempster, ELBS, 1974.