Tarek Kamal Hassan Mohamed
Professor at Structural Engineering
Career Information
Academic Information
Brief
Dr. Hassan obtained his M.Sc. and Ph.D. form the University of Manitoba, Canada in 1999 and 2002, respectively. His research interests include: Finite element analysis of concrete structures and use of advanced composite materials in construction.
Awards
BEST PAPER AWARD PRECAST PRESTRESSED CONCRETE INSTITUTE, USA CERTIFICATE 2007
NSERC POST DOCTORAL FELLOWSHIP NATIONAL AWARD, CANADA, JAN. 2003 – DEC. 2004
EDWARD TOPORECK GRADUATE SCHOLARSHIP, UNIVERSITY OF MANITOBA, CANADA, NOV. 2001
NSERC POST GRADUATE SCHOLARSHIP - B, NATIONAL AWARD
MAY 2000- APRIL 2002
GORDON P. OSLER GRADUATE SCHOLARSHIP, UNIVERSITY OF MANITOBA, CANADA, JUNE 1999
Articles
1. Salem, S., Hilal, K., Hassan, T., and Essawy, A. (2013) “Experimental Behavior of Partially Prestressed High Strength Concrete Beams”, Open Journal of Civil Engineering, Vol. 3, pp. 26-32.
2. El-Kateb, M., Abdel Rahman, A., and Hassan, T., (2013) “Torsional Strengthening of Reinforced Concrete Beams Using CFRP Sheets”, Civil Engineering Research Magazine, CERM, Al-Azhar University, Vol. 35, No. 2, April 2013, pp. 384-397.
3. Hassan, T., Mantawy, A., Soliman, J., Sherif, A., and Rizkalla, S., (2012), “Bond Characteristics and Shear Behavior of Concrete Beams Reinforced with High-Strength Steel Reinforcement”, Advances in Structural Engineering, Vol. 15, No. 2, pp. 303-318.(Impact factor=0.603)
4. Frankl, B., Lucier, G., Hassan, T. and Rizkalla, S., (2011), “Behavior of Insulated Precast Prestressed Concrete Sandwich Wall Panels Reinforced with CFRP Grid”, Accepted for Publication, PCI Journal, Spring 2011, pp. 42-54. (Impact factor=0.569)
5. Hassan, T., Lucier, G., and Rizkalla, S., (2011), “Splice Strength of Large Diameter, High Strength Steel Reinforcing Bars”, Construction and Building Materials, Vol. 26, pp. 216-225. (Impact factor=2.818)
6. Hassan, T. and Rizkalla, S. (2010), “Analysis and Design Guidelines of Precast/Prestressed Composite Load-Bearing Sandwich Wall Panels”, PCI Journal, Spring 2010, Vol. 55, No. 2, pp.147-162. (Impact factor=0.569)
7. Rizkalla, S., Hassan, T. and Lucier, G., (2009), “FRP Shear Transfer Mechanism for Precast, Prestressed Concrete Sandwich Load Bearing Panels,” ACI Special Publication SP-265-28, October 2009, pp. 603-626.
8. Shahawy, M., and Hassan, T., (2009), “Effect of Strand Debonding on Prestressed Girder Shear Performance”, ACI Special Publication SP-265-25, October 2009, pp. 533-552.
9. Hassan, T., Selim, H., Rizkalla, S., and Zia, P. (2008), “Shear Behavior of Large-Size Concrete Beams Reinforced with High- and Conventional- Strength Steel”, ACI Structural Journal, Vol. 105, No. 2, pp.173-179. (Impact factor=0.964)
10. Hassan, T., Vickery, J. D., and Rizkalla, S., (2007), “Properties of Adhesives and CPVC Materials Proposed for Steel Tank Lining”, Journal of Adhesion and Adhesives, El-Sevier Publications, Vol. 28, No. 1, pp. 77-90. (impact factor=2.216)
11. Hassan, T., (2007), “Finite Element Study of Shear Behavior of Spandrel Ledges and Comparison with PCI Shear Design Provisions”, Advances in Structural Engineering Journal, Vol. 10, No. 5, pp 475-485. .(Impact factor=0.603)
12. Hassan, T., Lucier, G., Rizkalla, S. and Zia, P. (2007), “Modeling of L-Shaped, Precast, Prestressed Concrete Spandrels”, Precast/Prestressed Concrete Institute (PCI) Journal, Vol. 52, No. 2, pp. 78-92. (Impact factor=0.569).
13. Rosenboom, O., Hassan, T., and Rizkalla, S., (2007), “Flexural Behavior of Aged Prestressed Concrete Girders Strengthened with Various FRP Systems,” Construction and Building Materials, Vol. 21, No. 4, April 2007, pp. 764-776. (Impact factor=2.818).
14. Hassan, T., (2006), “Behavior of Concrete Deep Beams Reinforced with High Strength Steel”, Ain Shams Scientific Bulletin, Vol.41 , No.3 , pp. 109-127.
15. Hassan, T. and Zia, P., (2005), “Effect of Moisture Content on the Air Permeability of Concrete”, American Concrete Institute, ACI Special Publication, SP 228-90, Vol. 228, June 2005.
16. Mufti, A., and Hassan, T., (2005), "Analytical Study of Punching Shear Strength of Restrained Concrete Slabs" Canadian Journal for Civil Engineering, Vol. 32, No. 2, pp. 449-453. (Impact factor=0.407)
17. Hassan T. and Rizkalla, S. (2004), “Bond Mechanism of Near Surface Mounted FRP Bars for Flexural Strengthening of Concrete Structures”, ACI Structural Journal, Vol. 101, No., 6, pp.830-839. (Impact factor=0.964)
18. Rizkalla, S., Hassan, T. and Hassan, N. (2003), "Design Recommendations for the Use of FRP for Reinforcement and Strengthening of Concrete Structures", Progress in Structural Engineering and Materials, Vol. 5, No. 1, pp.16-28. (Impact factor=0.67)
19. Hassan T. and Rizkalla, S. (2003), “Investigation of Bond in Concrete Structures Strengthened with Near Surface Mounted CFRP Strips” ASCE, Journal of Composites for Construction, Vol. 7, No. 3, pp.248-257. (Impact factor=1.817)
20. Rizkalla, S. and Hassan T. (2002), “Effectiveness of FRP Techniques for Strengthening Concrete Bridges” Journal of the International Association for Bridge and Structural Engineering, IABSE, SEI, Vol. 12, No. 2, pp. 89-95. (Impact factor=0.414)
21. Hassan T. and Rizkalla, S. (2002), “Flexural Strengthening of Post-Tensioned Bridge Slabs with FRP Systems”, PCI Journal, Vol. 47, No. 1, pp.76-93 (Impact factor=0.569)
22. Hassan, T., Mohamedien, M., Hassan, N. and Rizkalla, S. (2001), “Bond Performance of Different FRP Strengthening Systems”, P.S. Engineering Research Journal, Vol. 5, No. 2, pp. 15-23.
23. Hassan, T., Abdelrahman, A., Tadros, G., and Rizkalla, S. (2000), “FRP Reinforcing Bars for Bridge Decks” Canadian Journal for Civil Engineering, Vol. 27, No. 5, pp. 839-849. (Impact factor=0.407)
24. Hassan, T., Parmantier, D., Rehal, S., and Rizkalla, S. (2000), “Segmental Precast Concrete Piles: Solution For Underpinning” ACI Concrete International, Vol. 22, No. 8, pp.41-46.
Publications
26. Eltahawy, R, Hassan, T., and Abdelrahman, A., (2015), “Investigation of Debonding Failure in Fiber Reinforced Polymer Strengthened Beams”, 14th International Conference on Structural and Geotechnical Engineering, ICSGE 14, Cairo, 2015.
27. Eltahawy, R, Hassan, T., and Abdelrahman, A., (2015), “Modeling of Debonding in Fiber Reinforced Polymer Strengthened Beams”, 14th International Conference on Structural and Geotechnical Engineering, ICSGE 14, Cairo, 2015.
28. Hassan, T. and Malek, Charles, (2015), “Effect of Twisting Moment on the Punching Shear Capacity of Non-Prismatic Post-Tensioned Cantilever Beams”, 14th International Conference on Structural and Geotechnical Engineering, ICSGE 14, Cairo, 2015.
29. El-Sawy, M., Hassan, T., and Abdelrahman, A., (2012), “Bond Characteristics of Self-Consolidating Concrete Beams”, Proceeding of the International Conference of Bond in Concrete, Brescia, Italy, June 2012.
30. Hassan, T., (2012), “Influence of Shear Reinforcement Detailing on the Behavior of Concrete Column Heads”, IABSE Conference, Sharm El-Sheikh, Egypt, May 2012.
31. Eyada, M., Hassan, T., and Abdelrahman, A., (2012), “Effectiveness of Strengthening Low-Grade Eccentrically-Loaded Concrete Columns Using FRP Sheets”, IABSE Conference, Sharm El-Sheikh, Egypt, May 2012.
32. Soliman, J., Hassan, T., and Abdelrahman, A., Hamdy, O., and Rizkalla, S., (2012), “Special Cementitious Bonding Material For FRP Strengthening Systems”, IABSE Conference, Sharm El-Sheikh, Egypt, May 2012.
33. Soliman, J., Hassan, T., and Abdelrahman, A., Hamdy, O., and Rizkalla, S., (2012), “Prediction of Plate End Debonding and Flexural Failures for Fiber-Reinforced Grancrete Systems”, IABSE Conference, Sharm El-Sheikh, Egypt, May 2012.
34. Fathy, M., Khalil, M., Hassan, T., and Abdelrahman, A., (2011), “Shear Behavior of Concrete-Filled FRP Tubes,” First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Structures, SMAR 2011, Dubai, UAE.
35. Sarwat, S., Hassan, T., and Sherif, A., (2010), “Applicability and limitations of Seismic Analysis Techniques for R.C. Buildings with Different Configurations”, 7th International Conference in Structural and Geotechnical Engineering, Alexandria, Egypt, Dec. 2010.
36. Frankl, B., Lucier, G., Hassan, T. and Rizkalla, S., (2010), “Thermally Efficient Precast Prestressed Concrete Sandwich Load Bearing Wall Panels Reinforce with CFRP,” The 3rd Congress of the International Federation for Structural Concrete (fib), Washington, DC, May 29-June 2, 2010.
37. El-Agroudy, H., Hassan, T., Ghalab, A., Abdelwahed, O. and El-Fayad, A., (2009), "Ductility and Moment Redictribution in Continuous T-Section High-Strength Concrete Beams," Proceedings of the 13th International Conference on Structural and Geotechnical Engineering, Cairo Egypt, December 27-29, 2009.
38. Mantawy, A., Hassan, T., El-Fayad, A. and Rizkalla, S., (2009), "Behavior of High Strength Steel as Shear Reinforcement for Concrete Beams," Proceedings of the 13th International Conference on Structural and Geotechnical Engineering, Cairo Egypt, December 27-29, 2009.
39. Eltahawy, R., Hassan, T., El-Wahed, O. and Rizkalla, S., (2009), "Flexural Behavior of Concrete Beams Reinforced with High Strength Steel Reinforcing Bars," Proceedings of the 13 th International Conference on Structural and Geotechnical Engineering, Cairo Egypt, December 27-29, 2009.
40. Hassan, T., Rizkalla, S., (2009), “Analysis and Design Guidelines of Precast/Prestressed Composite Bond-Bearing Sandwich Wall Panels,” Proceeding of the Advanced Composites in Construction Conference, Edinburgh University, United Kingdom, September 1-3, 2009.
41. Soliman, J., Hassan, T., Sherif, A, and Rizkalla, S., (2008), “Bond Characteristics of Micro-Composite Multi Structural Formale Steel Reinforcement”, Proceedings of the 5th International Conference on Advanced Composite Materials for Bridges and Structures,” Winnipeg, Manitoba, Canada, Sep. 2008.
42. Saber, N., Hassan, T., Sherif, A., and Gith, H., (2008), “Flexural Behavior of Concrete Beams Strengthened with Steel Reinforced Polymers”, Proceedings of the Fourth International Conference on FRP Composites in Civil Engineering, CICE 2008, Zurich, Switzerland, July 2008.
43. Hassan, T., (2007), “Effect of Confinement on the Splice Strength of CFRP Bars”, Canadian Society of Civil Engineering, Proceedings of the CSCE Annual Conference, Yellowknife, Canada, June 2007.
44. Hassan, T., (2007), “Punching Shear Behavior of Spandrel Ledges”, Canadian Society of Civil Engineering, Proceedings of the CSCE Annual Conference, Yellowknife, Canada, June 2007.
45. Elsaid, A., Hassan, T., Abdel Faiad, A., and Gheith, H., (2007), “Splice Strength of Reinforcing Bars in Self-Consolidating Concrete,” Proceedings of the Sixth Alexandria International Conference on Structural and Geotechnical Engineering, Alexandria, Egypt. April 14-16, 2007.(CD ROM)
46. Smith, G., Hassan, T. and Rizkalla, S., (2005), "Bond Characteristics and Qualifications of Adhesives for Marine Applications and Steel Pipe Repair", Proceedings of the the Third International Conference on Construction Materials: Performance, Innovations and Structural Implications (ConMAT'05), Vancouver, Canada, August 22-24, 2005.
47. Nelson, L., Hassan, T. and Rizkalla, S., (2005), "Overall Behavior and Material Characterization of Pultruded GFRP Bridge Decks", Proceedings of the Fourth Middle East Symposium on Structural Composites for Infrastructure Applications (MESC4), Alexandria, Egypt, May 20-23 2005.
48. Norton, T., Hassan, T., Mohamed, M., and Rizkalla, S., (2004), "Behavior of 3-D Woven Glass Fiber Reinforced Polymeric Bridge Deck Slabs", Proceedings of the International Conference Future Vision and Challenges for Urban Development, Cairo, Egypt, December 20-22, 2004.
49. Rosenboom, O., Hassan, T., Mirmiran, A., and Rizkalla, S., (2004), "Static and Fatigue Performance of 40 year-old Prestressed Concrete Girders Strengthened with Various CFRP Systems", Proceedings of the International Conference Future Vision and Challenges for Urban Development, Cairo, Egypt, December 20-22, 2004.
50. Dawood, M., Seliem, H., Hassan, T., and Rizkalla, S., (2004), "Design Guidelines for Concrete Beams Reinforced with MMFX Composite Reinforcing Bars", Proceedings of the International Conference on Future Vision and Challenges for Urban Development, Cairo, Egypt, December 20-22, 2004.
51. Rosenboom, O., Hassan, T., Mirmiran, A., and Rizkalla, S., (2004), "Static and Fatigue Behavior of FRP Strengthened 40 Year Old Prestressed Concrete Bridge Girders", Second International Conference on FRP Composites in Civil Engineering, Adelaide, Australia, Dec. 2004.
52. Hassan, T., Rochelle, R., and Rizkalla, S., (2004), "Design Considerations for Concrete Bridge Decks Reinforced with FRP", Proceedings of the fourth International Conference on Advanced Composite Materials in Bridges and Structures - ACMBS-IV, Calgary, Alberta, Canada, July 2004.
53. Reis, E., Hassan, T., Dickinson, L., and Rizkalla, S., (2004), "Behavior of FRP Sandwich Panels for Transportation Infrastructure", Proceedings of the fourth International Conference on Advanced Composite Materials in Bridges and Structures - ACMBS-IV, Calgary, Alberta, Canada, July 2004.
54. Hassan, T., Reis, E., and Rizkalla, S. (2003), "Innovative 3-D FRP Sandwich Panels for Bridge Decks", Fifth Alexandria International Conference on Structural and Geotechnical Engineering, Egypt, Dec. 2003 (CD-ROM).
55. Rizkalla, S. and Hassan, T., (2003), “Bond characteristics of Various FRP Strengthening Techniques” 6th International Symposium on Fibre Reinforced Polymer (FRP) Reinforcement for Concrete Structures, FRPRCS-6, July 2003, Singapore.
56. Hassan, T. and Rizkalla, S. (2002), “Analytical Investigation of Bond Between FRP and Concrete”, 3rd Middle East Symposium on Structural Composites for Infrastructure Applications, Cairo, Egypt. Dec. 2002, CD-ROM.
57. Hassan, T. and Rizkalla, S. (2002), “Bond Mechanisms of Near Surface Mounted FRP Bars and Strips for Flexural Strengthening of Concrete.Structures”, 1st International Conference on Structural Health Monitoring of Innovative Civil Engineering Structures, Winnipeg, MB, Canada, September, 2002, CD-ROM.
58. Rizkalla, S. and Hassan, T. (2002), “Rehabilitation of Concrete Structures with FRP”, Accepted for publication in the 3rd International Conference on the Behavior of Damaged Structures, Rio de Janeiro, Brazil, July 2002.
59. Rizkalla, S. and Hassan, T. (2001), “Various FRP Strengthening Techniques for Retrofitting Concrete Structures”, CICE 2001 Conference proceedings, Hong Kong, December 2001, Vol. 2, pp. 1033-1040.
60. Hassan, T., Mohamedien, M., Hassan, N. and Rizkalla, S. (2001), “Bond Performance of Different FRP Strengthening Systems”, 3rd Canadian International Composites Conference, CANCOM 2001, Montreal, Quebec, Canada, August 2001, CD-ROM
61. Hassan, T. and Rizkalla, S. (2001), “Strengthening of Bridge Slabs with FRP Systems” Structural Faults and Repair Conference Proceedings, London, United Kingdom, July 2001. CD-ROM
62. Mufti, A., Hassan, T., Memon, A., and Tadros, G. (2001), “Analytical Study of Punching Shear Strength of Restrained Concrete Slabs” Canadian Society of Civil Engineering (CSCE) Annual Conference Proceedings, Victoria, British Colombia, May 2001. CD-ROM.
63. Rizkalla, S. and Hassan, T. (2000), “Design of Concrete Decks with FRP”, Proceedings of the 6th International Conference on Deterioration and Repair of Reinforced Concrete in the Arabian Gulf, Bahrain, October 2000, CD-ROM.
64. Hassan, T., Horeczy, G., Svecova, D., and Rizkalla, S. (2000), “Flexural Strengthening of Post-Tensioned Bridge Slab Using FRP” Proceedings of the third International Conference on Advanced Composite Materials for Bridges and Structures (ACMBS-III), Ottawa, Ontario, July, 2000.
65. Hassan, T., Abdelrahman, A., Tadros, G., and Rizkalla, S. (1999), “Design Guidelines for Bridge Deck slabs Reinforced by CFRP and GFRP” Proceedings of the Bridge Engineering Conference, Sharm El-Sheikh, Egypt, March, 2000, pp. 259-270.
66. Hassan, T., Louka, H., Abdelrahman, A., and Rizkalla, S. (1999), “Behavior of Bridge Decks Reinforced by FRP” International Conference on Composite Materials, Paris, France, July, 1999.CD-ROM.
67. Abdelrahman, A., Hassan, T., Tadros, G., and Rizkalla, S. (1998), “Behavior of Concrete Bridge Deck Model Reinforced By Carbon FRP.” Canadian Society of Civil Engineering (CSCE) Annual Conference Proceedings, Halifax, 1998.
Research Projects
Refer to CV