Full Name:
Mostafa Ibrahim Mohamed Marei
Academic Rank:
Professor
ASU Email:
mostafa_ibrahim@eng.asu.edu.eg
Departmment:
Electrical Power and Machines Engineering
Graduation Year:
1997

* My research interests include power electronics,
distributed and renewable generation, microgrids, power quality,
custom power, electrical drives, and artificial intelligent
applications in power systems.

* Senior Member; Institute of Electrical and Electronics Engineers (IEEE).

* Member in the editorial board of the "Electric Power Components and Systems" Journal.

* Reviewer for the following international journals:
-IEEE transaction on Sustainable Energy.
-IEEE transaction on Smart Grid.
-IEEE transaction on Energy Conversion.
-IEEE Transactions on Power Delivery.
-IEEE Transactions on Power System.
-IEEE Transactions on Industrial Electronics.
-IET Generation, Transmission, and Distribution.
-IET Renewable Power Generation.
-IET Power Electronics.
-The international Journal of electric power and energy systems (Elsevier).
-Electric Power System Research (Elsevier).
-Renewable energy (Elsevier).
-The international Journal of Electric Power Components and Systems (Taylor and Francis).
-Journal of Electrical Systems and Information Technology (Elsevier)
-Ain Shams Engineering Journal (Elsevier)
-Journal of Circuits, Systems and Computers.
-Frontiers of Information Technology & Electronic Engineering (Springer)
-International Research Journal of Engineering Science, Technology and Innovation
-Scientific Research and Essays.


Degrees:
* Ph.D., Electrical and Computer Engineering Department, University of Waterloo, Canada, 2004.

* M.Sc. Electrical Power and Machines Department, Ain Shams University, Cairo, Egypt, 2000.

* B.Sc. Electrical Power and Machines Department, Ain Shams University, Cairo, Egypt, 1997.


Awards:
1) Encouraging State Prize (State Incentive Award) - Academy of Scientific Research and Technology - Egypt, 2013.

2) Symbol of Faculty of engineering - Ain Shams University for the standing youth researcher from the stuff of the electrical power and machines department, June 2013.

3) My biography is listed in the 2013 Edition of Marquis Who's Who in the World, August 2012.

4) International publications award from Ain Shams University (6 times), 2008 to 2011.

5) My biography is listed in the 2009 Edition of Marquis Who's Who in the World, August 2008.

6) Natural Sciences and Engineering Research of Canada (NSERC) Post Doctoral Fellowship (from the Canadian Government), May 2004 – April 2006.

7) Ontario Graduate Scholarship, May 2003 – April 2004.

8) University of Waterloo, Canada, E&CE Graduate Scholarship, May 2001 – April 2003.

9) Faculty of Engineering Scholarship (FOE), by University of Waterloo (5 times), Sept. 2001 – Sept. 2003.


Books:
Reviewer of the book titled “Programmable logic control” for third-year industrial-secondary schools, Ministry of Education, Cairo, Egypt, 2011-2013.
Published Research:
1) M. I. Marei, E.F. El-Saadany, and M.M.A. Salama, “A Novel Control Algorithm for the DG Interface to Mitigate Power Quality Problems,” IEEE Transaction on Power Delivery, Vol. 19, No. 3, July 2004, pp. 1384 - 1392.

2) M. I. Marei, E. F. El-Saadany, and M. M. A. Salama, “A Processing Unit for Symmetrical Components and Harmonics Estimation Based on a New Adaptive Linear Combiner Structure,” IEEE Transaction on Power Delivery, Vol. 19, No. 3, July 2004, pp. 1245 - 1252.

3) M. I. Marei, E.F. El-Saadany, and M.M.A. Salama, “Envelope Tracking Techniques for Flicker Mitigation and Voltage Regulation,” IEEE Transaction on Power Delivery, Vol. 19, No.4, Oct. 2004, pp. 1854-1861.

4) M. I. Marei, E.F. El-Saadany, and M.M.A. Salama, “Estimation Techniques for Voltage Flicker Envelope Tracking,” Electric Power System Research Journal (Elsevier), Vol. 70, 2004, pp. 30-37.

5) M. I. Marei, E. F. El-Saadany, and M. M. A. Salama, “A Novel Current Regulated PWM Technique for ADALINE based Active Power Line Conditioner,” International Journal of Engineering Intelligent systems for Electrical Engineering & Communication (IJEIS), UK, Vol. 12, No. 2, 2004, pp. 127- 134.

6) M. I. Marei, T. K. Abdel-Galil, E. F. El-Saadany, and M. M. A. Salama, “Hilbert Transform Based Control Algorithm of the DG Interface for Voltage Flicker Mitigation,” IEEE Transaction on Power Delivery, Vol. 20, No. 2, April 2005, pp. 1129-1133.

7) M. I. Marei, E. F. El-Saadany, and M. M. A. Salama, “A New Approach to Control DVR based on Symmetrical Components Estimation,” IEEE Transaction on Power Delivery, Vol. 22, No. 4, Oct. 2007, pp. 2017-2024.

8) M. I. Marei and R. El-Shatshat, “Fast Envelope Estimation Technique for Monitoring Voltage fluctuations,” Journal of Electrical Engineering & Technology (JEET), Vol. 2, No. 4, 2007, pp. 445- 451.

9) A. M. Ibrahim, M. I. Marei, M.M. Mansour, and S. F. Mekhamer, “ANN-Based Approach Using TLS-ESPRIT for Protection of Series Compensated (TCSC) Transmission Lines,” The Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 42, No. 2, June 2007, pp. 767-783.

10) I. El-samahy, M. I. Marei, and E. F. El-Saadany, “On Modeling of a Four-Quadrant Switched Reluctance Motor Drive on EMTDC/PSCAD,” Journal of Electrical Engineering & Technology (JEET), Vol. 3, No. 1, 2008, pp. 68- 78.

11) Y. Montasser, M. I. Marei, and S. H. Jayaram, “Low-Power High-Voltage Power Modulator for Motor Insulation Testing,” IEEE Transaction on Industry Applications, Vol. 44, No. 4, July/Aug 2008, pp. 1059- 1066.

12) A. A. El-Sattar, M. I. Marei, and E. A. Mahmoud, “A new sensorless control scheme for medium voltage drive based on induction motor,” Ain Shams Journal of Electrical Engineering (ASJEE), Vol. 2, Dec. 2008, pp. 109-118.

13) M. I. Marei, A. A. El-Sattar, and E. A. Mahmoud, “A comparison between reduced order kalman filters and a recursive least square algorithm for sensorless induction motor drive,” Ain Shams Journal of Electrical Engineering (ASJEE), Vol. 1, June 2009, pp. 215-226.

14) M. I. Marei, M. F. Shaaban, and A. A. El-Sattar, “A speed estimation unit for induction motors based on adaptive linear combiner,” Energy Conversion and Management (Elsevier), Vol. 50, No. 7, July 2009, pp. 1664 – 1670.

15) M. H. Soliman, M. I. Marei, M. M. Mansour, and A. M. A. Mahmoud, “Stability improvement of distribution networks using inverter-based distributed generators at different modes of operation,” Ain Shams Journal of Electrical Engineering (ASJEE), Vol. 2, Dec. 2009, pp. 349-360.

16) M. I. Marei, E. F. El-Saadany, and M. M. A. Salama, “Experimental evaluation of envelope tracking techniques for voltage disturbances,” Electric Power System Research (Elsevier), Vol. 80, No. 3, March 2010, pp. 339 – 344.

17) M. I. Marei, A. A. El-Sattar, and E. A. Mahmoud, “Reduced order models for speed estimation of sensorless induction motor drives based on kalman filter and rls algorithm,” International Journal of Engineering Intelligent systems for Electrical Engineering & Communication (IJEIS), Vol. 18, No. 1, March 2010, pp. 25-33.

18) M. I. Marei, “A unified interface system for high-speed generators based on a current controlled matrix converter,” Ain Shams Journal of Electrical Engineering (ASJEE), Vol. 2, Dec. 2010, pp. 45-56.

19) A. M. Ibrahim, M. I. Marei, M.M. Mansour, and S. F. Mekhamer, “An artificial neural network based protection approach using total least square estimation of signal parameters via the rotational invariance technique for flexible AC transmission system compensated transmission lines,” Electric Power Components and Systems, Vol. 39, Issue 1, 2011, pp. 64-79.

20) M. I. Marei, I. Abdallah, and H. Ashour, “Transformerless uninterruptible power supply with reduced power device count,” Electric Power Components and Systems, Vol. 39, Issue 11, 2011, pp. 1097-1116.

21) M. I. Marei, Ayman B. Eltantawy, and A. A. El-Sattar, “An energy optimized control scheme for a transformerless DVR,” Electric Power System Research (Elsevier). Vol. 83, No. 1, Feb. 2012, pp. 110 – 118.

22) M. I. Marei, E. F. El-Saadany, and M. M. A. Salama, “A flexible DG interface based on a new RLS algorithm for power quality improvement,” IEEE Systems Journal, Vol. 6, Issue 1, Mar. 2012, pp. 68-75.

23) M. I. Marei, “A unified control strategy based on phase angle estimation for matrix converter interface system,” IEEE Systems Journal, Vol. 6, No. 2, June 2012, pp. 278-286.

24) M. I. Marei and M. H. Soliman “A coordinated voltage and frequency control of inverter based distributed generation and distributed energy storage system for autonomous microgrids,” Electric Power Components and Systems, Vol. 41, Issue 4, 2013, pp. 383-400.

25) O. El-Nakeeb, M. I. Marei, and A. A. El-Sattar “A high frequency modular resonant converter for the induction heating,” International Journal of Emerging Technology and Advanced Engineering, Vol. 3, Issue 2, 2013, pp. 432-438.

26) M. I. Marei, M. M. Abdelmageed, and A. M. Asaad, “A simple adaptive control technique for shunt active power filter based on clamped-type multilevel inverters,” Consumer Electronics Times, Vol. 2, Issue 2, 2013, pp. 85-95.

27) M. I. Marei, M. A. Allam, and A. A. El-Sattar “A Simple Control Scheme for the High Performance Z-Source Inverter,” Electric Power Components and Systems, Vol. 42, Issue 14, 2014, pp. 1623-1631.

28) M. I. Marei, Nour El-Sayad, and A. A. El-Sattar “PV interface system with LVRT capability based on a current controlled HFAC link converter,” Sustainable Energy Technologies and Assessments (Elsevier),Vol. 9, Mar. 2015, pp. 55-62.

29) M. I. Marei, Mohamed Mokhtar, and A. A. El-Sattar “MPPT Strategy based on Speed Control for AWS-based Wave Energy Conversion System,” Renewable Energy (Elsevier),Vol. 83C, Nov. 2015, pp. 305-317.

30) M. I. Marei, Ahmed Mohy, and A. A. El-Sattar “An Integrated Control System for Sparse Matrix Converter Interfacing PMSG with the Grid,” International Journal of Electrical Power & Energy Systems (Elsevier), Vol. 73, Dec. 2015, pp. 340-349.

31) H. Y. Diab, M. I. Marei, and S. A. Tennakoon, “Operation and control of an insulated gate bipolar transistor-based current controlling device for power flow applications in multi-terminal high-voltage direct current grids,” IET Power Electronics, Vol. 9, No. 2, February 2016, pp. 305 –315.

32) M. Abdelsalam, M. I. Marei, S. A. Tennakoon, Alison Griffiths, “Capacitor Voltage Balancing Strategy Based on Sub-module Capacitor Voltage Estimation for Modular Multilevel Converters,” IEEE-CSEE Journal of Power and Energy Systems, Vol. 2, No.1, March 2016, pp. 65-73.

33) M. I. Marei, H. S. K. El-Goharey, R.M. Toukhy “Fault ride-through enhancement of fixed speed wind turbine using bridge-type fault current limiter,” Journal of Electrical Systems and Information Technology (Elsevier), Vol. 3, No. 1, May 2016, pp. 119-126..

34) H.M. El-Helw, M. Al-Hasheem, and M. I. Marei, “Control strategies for the DAB based PV interface system,” PLoS ONE, Vol. 11, No. 8, August 2016, pp. 1-19.

35) H. Y. Diab, M. I. Marei, and S. A. Tennakoon, “A Reduced Switches Count Topology of Current Flow Control Apparatus for MTDC Grids,” Journal of Power Electronics (JPE), Vol. 16, No. 5, September 2016.

36) M. Abdelsalam, M.I. Marei, S. Tennakoon, “An Integrated Control Strategy with Fault Detection and Tolerant Control Capability Based on Capacitor Voltage Estimation for Modular Multi-level Converters,” IEEE Industry Applications, 2016.

37) S. Mansour, M.I. Marei, A. A. El-Sattar, “Droop based Control Strategy for a Microgrid,” Global Journal of Researches in Engineering :F, Vol. 16, Issue 7, 2016. DOI: 10.17406/GJRE.
Published Research in Confernces:
1) A. Zakaria, M. I. Marei, and A. A. El-Sattar, “A fault-tolerant strategy for current controlled PWM rectifier,” IEEE 18th International Middle East Power System Conference MEPCON, 27-29 Dec., 2016, Helwan University, Cairo, Egypt.

2) Hatem Diab, S. Tennakoon, C. Gould, and M.I. Marei, “An IGBT based current flow controller for use in meshed HVDC grids,” IET International Conference on Renewable Power Generation (RPG), 21-23 September 2016, London, UK.

3) M. Abdelsalam, S. Tennakoon, A.L. Griffiths, and M.I. Marei, “A smart fault detection and localization strategy of modular multi-level converters for HVDC networks,” IET International Conference on Renewable Power Generation (RPG), 21-23 September 2016, London, UK.

4) Hatem Diab, M.I. Marei, M. Abdelsalam, S. Tennakoon, C. Gould, “Real Time Simulation of a Current Flow Controller for HVDC Grid Applications,” 51th International Universities Power Engineering Conference (UPEC), 6-9 September 2016, Coimbra, Portugal.

5) M. Abdelsalam, M.I. Marei, Hatem Diab, S. Tennakoon, Alison Griffiths, “Detection and diagnosis of sub-module faults for modular multilevel converters,” 51th International Universities Power Engineering Conference (UPEC), 6-9 September 2016, Coimbra, Portugal.

6) H. Diab, S. Tennakoon, M. Abdelsalam, M. I. Marei, “A current flow control apparatus for meshed multi-terminal DC grids,” 19th International Symposium on Electrical Apparatus and Technologies (SIELA), 29 May – 1 June 1 2016, Bourgas, Bulgaria.

7) M. Abdelsalam, S. Tennakoon, H. Diab, M. I. Marei, “An ADALINE based capacitor voltage estimation algorithm for modular multilevel converters,” 19th International Symposium on Electrical Apparatus and Technologies (SIELA), 29 May – 1 June 1 2016, Bourgas, Bulgaria.

8) Hatem Diab, M.I. Marei, M. Abdelsalam, S.A. Tennakoon, Chris Gould, “Real Time Simulation of a Current Flow Controller for HVDC Grid Applications,” 51th International Universities Power Engineering Conference (UPEC), 6-9 September 2016, Coimbra, Portugal.

9) M. Abdelsalam, M.I. Marei, Hatem Diab, S.A. Tennakoon, Alison Griffiths, “Detection and diagnosis of sub-module faults for modular multilevel converters,” 51th International Universities Power Engineering Conference (UPEC), 6-9 September 2016, Coimbra, Portugal.

10) H. H. Eldeeb, W. A. Omran, and M. I. Marei, “Sizing and control of large PV system inverters connected to MV grid,” 1st Future University International Conference on New Energy & Environmental Engineering (ICNEEE), 11-14 April 2016, Cairo, Egypt.

11) K. El-Khalafawy, Noha H. El-Amary, and M. I. Marei, “Modeling and Design of a Three-Degree of Freedom Electromagnetic Spherical Motor,” Proceeding of the 17th International Middle East Power System Conference (MEPCON), 15-17 Dec., 2015, Mansoura University, Cairo, Egypt.

12) P. Magdy, M. I. Marei, and A.A. El-Sattar, “A Fault Tolerant Control for Current Regulated AC-DC Converters,” Proceeding of the 17th International Middle East Power System Conference MEPCON, 15-17 Dec., 2015, Mansoura University, Cairo, Egypt.

13) H. Diab, C. Gould, M. I. Marei, and S. Tennakoon, “An Investigation of Power Flow Control Methods in Multi Terminal High Voltage DC Grids,” 50th International Universities Power Engineering Conference (UPEC), Sept. 1-4, 2015, Staffordshire University, UK.

14) M. Abdelsalam, M. I. Marei, and S. Tennakoon, “Investigation of Sub-Module Fault Types of Modular Multi-level Converters in HVDC Networks,” International Universities Power Engineering Conference (UPEC), Sept. 1-4, 2015, Staffordshire University, UK.

15) M. I. Marei, H. El-Helw, and M. Al-Hasheem, “A Grid-Connected PV Interface System Based On The DAB-Converter,” IEEE International Conference on Environment and Electrical Engineering (EEEIC), June 10-13, 2015, Rome, Italy, pp. 161-165.

16) Nour El-Sayad, M. I. Marei, and A. A. El-Sattar “A Current Controlled High-Frequency AC Link Converter for PV Interfacing System,” International Middle East Power System Conference (MEPCON), Dec. 23-25, 2014, Cairo, Egypt.

17) Ahmed Mohy, M. I. Marei, and A. A. El-Sattar “A Simple Control System for Sparse Matrix Converter to Interface PMSG with the Grid,” International Middle East Power System Conference (MEPCON), Dec. 23-25, 2014, Cairo, Egypt.

18) M. I. Marei, Mohamed Mokhtar, and A. A. El-Sattar “A Speed-Sensorless Optimal Control Approach for LPMSG Based WECS,” International Middle East Power System Conference (MEPCON), Dec. 23-25, 2014, Cairo, Egypt.

19) H. S. K. El-Goharey, M. I. Marei, and M. G. S. Zaghloul, “Modelling and Analysis of Wind Turbine Based DFIG,” International Middle East Power System Conference (MEPCON), Dec. 23-25, 2014, Cairo, Egypt.

20) M. R. Hamouda, M. I. Marei, and M. A. Badr, “A Microturbine Interface System with LVRT Capability,” The Australasian Universities Power Engineering Conference (AUPEC), 28 September - 1 October 2014, Curtin University, Perth WA, Australia.

21) H.A. Soliman, H. Wang, F. Blaabjerg, and Dao Zhou, M. I. Marie, “Sizing of the Series Dynamic Breaking Resistor in a Doubly Fed Induction Generator Wind Turbine,” IEEE Energy Conversion Congress and Exposition (ECCE), Sept. 14-18, 2014, Pittsburgh, PA, USA.

22) R. M. Hossam, G. M. Hashem, and M. I. Marei, “Optimized Harmonic Elimination for Cascaded Multilevel Inverter,” Universities Power Engineering Conference (UPEC), Sept. 2-5, 2013, Dublin (Ireland).

23) M. I. Marei and H. S. K. El-Goharey, “Dynamic performance analysis of a wind farm equipped with STATCOM,” IEEE International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), May 13-17, 2013, Istanbul (Turkey).

24) M. A. Allam, M. I. Marei, and A. A. El-Sattar, “Three-phase uninterruptable power supply based on high performance Z-source inverter,” IEEE International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), May 13-17, 2013, Istanbul (Turkey).

25) H. Soliman, M. I. Marei, R. M. El-Sharkawy, and K. El-Bahrawy, “Analysis of the Dynamic Behavior of a DFIG during Grid Disturbances using Active Crowbar Protection,” IEEE International Conference on Environment and Electrical Engineering (EEEIC), pp. 160-163, May 5-8, 2013, Wroclaw (Poland).

26) H. S. El-Goharey, M. I. Marei, and M. G. S. Zaghloul, “Low Voltage Ride Through Characterization of Wind Energy Conversion Systems,” International Conference on Renewable Energies and Power Quality (ICREPQ), March 20-22, 2013, Bilbao (Spain). Republished in Renewable Energy and Power Quality Journal (RE&PQJ), No. 11, Mar 2013.

27) S. A. M. Shehata, H. S. El-Goharey, M. I. Marei, A. K. Ibrahim, “Detection of Induction Motors Rotor/Stator Faults Using Electrical Signatures Analysis,” International Conference on Renewable Energies and Power Quality (ICREPQ), March 20-22, 2013, Bilbao (Spain). Republished in Renewable Energy and Power Quality Journal (RE&PQJ), No. 11, Mar 2013.

28) S. M. Badawi, M. I. Marei, and A. A. El-Sattar, “A Simple Adaptive Voltage Sag Ride-Through System for
Adjustable Speed Drives,” International Middle East Power System Conference (MEPCON), Dec. 23-25, 2012, Alexandria, Egypt.

29) M. G. S. Zaghloul, M. I. Marei, W. El-Khattam, M. A. L. Badr, and H. S. K. El-Goharey, “Modeling of Asynchronous machines for stability analysis,” International Conference on Electrical Engineering (ICEENG), May 29-31, 2012, Military Technical College, Cairo, Egypt.

30) M. I. Marei and H. S. K. El-Goharey, “Modeling and Dynamic Analysis of Gearless Variable-Speed Permanent Magnet Synchronous Generator Based Wind Energy Conversion System,” International Conference on Renewable Energies and Power Quality (ICREPQ), March 28-30, 2012, Santiago de Compostela (Spain). Republished in Renewable Energy and Power Quality Journal (RE&PQJ), No. 10, April 25th 2012.

31) M. A. Badr, M. I. Marei and A. M. Abdin, “Direct Power Control of DFIG based on a 3-Level Flying Capacitor Multi-Level Inverter,” IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), December 6-8, 2011, Amman, Jordan.

32) A. K. Ibrahim, M. I. Marei, H. S. El-Gohary, and S. A. Mohamed, “Modeling of Induction motor Based on Winding Function Theory to Study Motor under Stator/Rotor Internal Faults,” The International Middle East Power System Conference (MEPCON), Dec. 19-22, 2010, Cairo, Egypt.

33) A. A. El-Sattar, M.I. Marei, and A.O. Badr, “Back-to-Back Converters with Doubly Fed Induction Generators for Wind Energy Scheme,” The IEEE International Conference on Computer Engineering & Systems (ICCES’2010), November 30- December 1, 2010, Cairo, Egypt, pp114 – 119.

34) M. I. Marei, Ayman R. Sadek, A. A. El-Sattar, “A Fuel Cell Interface System Based on a High Frequency Link,” The International Middle East Power System Conference (MEPCON), 20-23 Dec. 2009, Asuit, Egypt.

35) I. Abdallah, M. I. Marei, and H. Ashour, “A Transformer-less Uninterruptible Power Supply,” The International Middle East Power System Conference (MEPCON), 20-23 Dec. 2009, Asuit, Egypt.

36) H. Ashour, I. Abdallah, and M. I. Marei, “A Novel Space Vector Modulation Based 3-ph High Performance Transformer-Less UPS,” The International Conference on Computer Theory and Applications (ICCTA), 17-19 October 2009, Alexandria, Egypt.

37) M. Ezzat, M. I. Marei, M. Abdel-Rahman, and M. Mansour, “A Hybrid Strategy for Distributed Generators Islanding Detection,” IEEE International Conference on Power Engineering (Powerafrica), 16-20 July. 2007, Johannesburg, South Africa.

38) M. I. Marei and M.M.A. Salama, “Advanced Techniques for Voltage Flicker Mitigation,” IEEE International Power Electronics Congress (CIEP), 16-18 Oct. 2006, Cholula, Pue. México.

39) M. I. Marei, S. J. Samborsky, S. Lambert, and M.M.A. Salama, “On the Characterization of Ultracapacitor Banks Used for HEVs,” IEEE Vehicle Power and Propulsion (VPPC) Conference, 6-8 September 2006 Windsor, UK.

40) M. I. Marei, and A. H. El-Hag, “Design Considerations of Pulse Power Supply for Food Pasteurization Application,” ESA/IEJ/IEEE-IAS/SFE Joint Conference on Electrostatics, 6-9 June 2006, University of California, Berkeley, USA.

41) Y. Montasser, M.I. Marei, and S.H. Jayaram, “Low Power – High Voltage Pulse Generator for Testing Motor Insulation Systems,” ESA/IEJ/IEEE-IAS/SFE Joint Conference on Electrostatics, 6-9 June 2006, University of California, Berkeley, USA.

42) M. I. Marei, S. Lambert, R. J. Pick, and M.M.A. Salama, “DC/DC Converters for Fuel Cell Powered Hybrid Electric Vehicle,” IEEE Vehicle Power and Propulsion (VPPC) Conference, 6-10 September 2005 Chicago, Illinois, USA.

43) M. Wei, M. I. Marei, M.M.A. Salama, and S. Lambert, “Designing Energy Storage Systems for Hybrid Electric Vehicles,” Canadian Design Engineering Network International Conference CDEN, 18-20 July 2005, Kananaskis, Alberta, Canada.

44) I. El-Samahy, M. I. Marei, and E.F. El-Saadany, “Dynamic Simulation of a Switched Reluctance Motor Drive on EMTDC/PSCAD Software,” IEEE Proceeding of General Meeting 2005, 12-16 June, San Francisco, CA, USA.

45) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “A Novel Control Scheme for STATCOM Using Space Vector Modulation Based Hysteresis Current Controller,” 11th International Conference on Harmonics and Quality of Power ICHQP 2004, 12-15 Sept., 2004, New York, USA.

46) H. Zeineldin, M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “Safe Controlled Islanding of Inverter Based Distributed Generation,” 35th IEEE Power Electronics Specialists Conference PESC’04. 20-26 June, 2004, Aachen, Germany.

47) M. A. El-Dery, T. K. Abdel-Galil, M. I. Marei, E. F. El-Saadany, and M. M. A. Salama, “A Virtual Instrument for Voltage Flicker Tracking,” IEEE Proceeding of General Meeting 2004, 6-10 June, Denver, Colorado USA.

48) M. T. Kires, M. I. Marei, S. Lambert, R. J. Pick, “Design and Prototype of Electric Drivetrain utilizing Electrochemical Capacitors,” Canadian Design Engineering Network Conference CDEN, 29-30 May, 2004, Montreal, Canada.

49) I. El-Samahy, M. I. Marei, and E.F. El-Saadany, “A Study of the Dynamic Behavior of Switched Reluctance Motor Drive,” IEEE Midwest Conference, 27-29 Dec., 2003, Cairo, Egypt.

50) M. I. Marei, T. El-Fouly, E. F. El-Saadany and M. M. A. Salama, “A Flexible Wind Energy Scheme for Voltage Compensation and flicker Mitigation,” IEEE Proceeding of General Meeting 2003, 13-18 July, 2003, Toronto, Canada.

51) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “An Efficient Control of the Series Compensator for Sag Mitigation and Voltage Regulation,” 34th IEEE Power Electronics Specialists Conference PESC’03, 15-19 June, 2003, Acapulco, MÉXICO

52) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “Dynamic Performance of an Enhanced STATCOM Current Control Scheme for Reactive Power Compensation,” Proceeding of 2003 IEEE Canadian Conference of Electrical and Computer Engineering CCECE, 4-7 May, 2003, Montreal, Canada.

53) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “An Intelligent Control for the DG Interface to Mitigate Voltage Flicker,” 18th IEEE Applied Power Electronics Conference APEC’03, 9-13 February 2003, Florida, USA.

54) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “A New Contribution into Performance of Active Power Filter Utilizing SVM based HCC Technique,” IEEE Proceeding, Summer Meeting 2002, 19-23 July 2002, Chicago, USA.

55) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “Flexible Distributed Generation: (FDG),” IEEE Proceeding, Summer Meeting 2002, 19-23 July 2002, Chicago, USA.

56) M. I. Marei, E. F. El-Saadany and M. M. A. Salama, “A Novel Current Regulated PWM Technique for Multi-Converter Active Power Line Conditioner,” IEEE Proceeding Winter Meeting 2002, 19-23 January 2002, New York, USA.

57) H.M. Mashaly, A.A. El-Sattar and M. I. Marei, “Extensive Digital Simulation of A Combined IFOC and SVM Based HCC for Induction Motor Drive: Part I,” Proceeding of the 7th International Middle East Power System Conference MEPCON, 28-30 Mar., 2000, Ain Shams University, Cairo, Egypt.

58) H.M. Mashaly, A.A. El-Sattar and M. I. Marei, “A Dynamic Simulation of FLC for IFOC Induction Motor Drive Based SVM-HCC: Part II,” Proceeding of the 7th International Middle East Power System Conference MEPCON, 28-30 Mar., 2000, Ain Shams University, Cairo, Egypt.

Educational and Research Projects:
1) “Connection of Power From Wind Energy to National Grid”. This is a two years research project, funded by Science and Technology Development Fund (STDF) – Egypt. Starting date: Oct. 2010 - 2013.

2) Team leader of a students group participated in the ROBOCON contest 2007, Cairo.

3) “Development of an Energy management unit for Hybrid Electric Vehicles using Ultracapaciors for regenerative braking” For NSERC, Canada – 2004 to 2006.

4) “Design of a medium voltage (MV) inverter for the insulation testing of electric motor drives” For the high voltage research group at university of Waterloo, 2005.

5) Designer of an electric vehicle prototype under cooperation with the Mechanical Engineering Dept., University of Waterloo (started from April 2003). The project is funded from AUTO21/ NSERC, Canada.
Designer of a Digital Signal Processor (DSP) board, University of Waterloo (Aug 2003).


Consulting and Engineering Projects:
Reviewer of the electrical wiring for the project of developing a data center for the National Authority for Remote Sensing, Engineering consulting center, Faculty of engineering, Ain Shams University (2011 to 2013)

Supervised Thesis:
1) Amr Mohamed Ibrahim, “Protection for Flexible Alternating-Current Transmission Systems,” Ph.D., Ain Shams University, (April 2008)

2) Mostafa Farouk Shaaban, “Sensorless AC drive,” M.Sc., Ain Shams University, (June 2008)

3) Ayman Rabie Ahmed Sadek, “Fuel Cell Interface System Based High Frequency Link Converter,” M.Sc., Ain Shams University, (May 2009)

4) Morad Mohamed Abdelmageed Abdelaziz, “A Study of an Active Filter for Harmonic Compensation,” M.Sc., Ain Shams University, (July 2009)

5) Ibrahim Abdallah, “A Transformer-less Uninterruptible Power Supply,” M.Sc., Arab Academy for Science, Technology & Maritime Transport, (Oct. 2009)

6) Elhussien Abbass Mahmoud, “A Medium Voltage Drive for Active Heave Compensation,” Ph.D., Ain Shams University, (Nov. 2009)

7) Ayman Bahgat Abdel-Azim Ibrahim, “Transformerless Dynamic Voltage Restorer for Medium Voltage Distribution Networks,” M.Sc., Ain Shams University, (Dec. 2009)

8) Ahmed Othman Badr, “Doubly Fed Induction Generator using Back-to-back Converters for Wind Energy Generation,” M.Sc., Ain Shams University, (May 2010)

9) Hany Nabil Osman El-Gendy, “A Microturbine Interface for a Distributed Generation System,” M.Sc., Ain Shams University, (May 2010)

10) Soha Mansour Badawi, “A New technique to Voltage Sag Ride-Through for Adjustable Speed Drives,” M.Sc., Ain Shams University, (July 2010)

11) Mohammed Hassan Soliman, “Improvement of Quality Control Centers In Flexible, Reliable and Intelligent
Electrical Energy Distribution Systems,” Ph.D., Ain Shams University, (April 2011)

12) Ahmed Khalid Ibrahim, “Motor Current Signature Analysis,” M.Sc., Ain Shams University, (May 2011)

13) Mahmoud Osama Al-Wadie, “An islanding detection Scheme based on fast angle estimation technique for inverter based distributed generation,” M.Sc., Arab Academy for Science, Technology & Maritime Transport, (June 2011)

14) Usama Omar Mohamed Klf Radwan, “Multifunction Fuel Cell interface Based Distributed Generation System” M.Sc., Ain Shams University, (Oct. 2011)

15) Khalid Abel-Rahman, “On the Performance Study of Wind Farms,” M.Sc., Ain Shams University, (March 2012)

16) Amr Magdey, “Modeling and Control of Wind Energy Conversion Systems based on Multi-level Inverters,” Ph.D., Ain Shams University, (April 2012)

17) Hammam Soliman, “Analysis of the Dynamic Behavior of a DFIG during Grid Disturbances using Active Crowbar Protection,” M.Sc., Arab Academy for Science, Technology & Maritime Transport, (May 2013)

18) Mahmoud Allam, “On the Study of Z-source Converters,” M.Sc., Ain Shams University, (August 2013)

19) Nour Eldin Mohamed Anwar Elsayad, “A Study of a Current Controlled High Frequency AC Link with Low Voltage Ride-Through Capability,” M.Sc., Ain Shams University, (Dec. 2013)

20) Mohamed Mokhtar, “A Direct Drive Based Wave Energy Conversion System,” M.Sc., Ain Shams University, (Feb. 2014)

21) Ahmed Mohy Eldeen, “Sparse Matrix Converters for Interfacing Variable Speed Generators with the Grid,” M.Sc., Ain Shams University, (Mar. 2014)

22) Mohammed Adel Shaltout, “A Permanent magnet synchronous motor drive based on a current controlled cascaded multilevel inverter,” M.Sc., Cairo University, (June 2014)

23) Ramy Mohmaed Hossam, “Enhancement of Multilevel Inverters Characteristics by Using PWM Techniques,” M.Sc., Ain Shams University, (Aug. 2014)

24) Omar Ramzy Elnakeeb, “A High Frequency modular Resonant Converter for the Induction Heating,” M.Sc., Ain Shams University, (Aug. 2014)

25) Mohamed Rizk Hamouda, “An interface system for microturbine generators,” M.Sc., Ain Shams University, (May. 2015)

26) Mohamed Adel Al-Hasheem, “A grid connected photovoltaic interface system based on dual active bridge converter,” M.Sc., Arab Academy for Science, Technology & Maritime Transport, (Aug. 2015)

27) Hassan Hossam Eldeeb, “Performance analysis of a hybrid PV system,” M.Sc., Ain Shams University, (May 2016)

28) Randa Mohamed Toukhy, “On the Study of Equivalent Wind Farm with Reactive Power Compensation,” M.Sc., Ain Shams University, (August 2016)

29) Peter Magdy Fawzy Elia, “A Fault Tolerant Control Strategy For Electronic Converters,” M.Sc., Ain Shams University, (August 2016)

30) Hatem Yassin Mohamed Elhady Diab, “A modular IGBT based current flow controller for multi-terminal HVDC grids,” Ph.D., Staffordshire University, UK, (Septemper 2016)

31) Mahmoud Osama Abdelsalam, “Fault detection, diagnosis and tolerant control of modular multi-level converters,” Ph.D., Staffordshire University, UK, (Septemper 2016)

32) Kareem M. El-Khalafawy, “Design, Modeling and Control of Electromagnetic Spherical Actuator,” M.Sc., Arab Academy for Science, Technology & Maritime Transport, (Dec. 2016)

Other:
1) Member of the Technical Program Committee of the 4th International Conference on Electric Power and Energy Conversion Systems (EPECS'15)

2) Member of the Technical Program Committee of the 16th International Middle East Power System Conference (MEPCON 2014)
Reviewer of the book titled “Programmable logic control” for third-year industrial-secondary schools, Ministry of Education, Cairo, Egypt, 2011-2013.

3) Head of the editing and publishing committee of the Second Ain Shams University International Conference on Environmental Engineering, Cairo, Egypt, 2009. Also, I was participating in the technical and general management committees.

4) Responsible for preparing a new undergraduate study program at Faculty of engineering, Ain Shams university entitled “Energy and Renewable Energy” in cooperation with the Technical University of Clausthal, Germany. The program is started at 2009 and I was the first director for it.

5) Member in a team for preparing a proposal for a joint graduate program with Cologne University for Applied Sciences (CUAS), Cologne, Germany, 2007-2008.

6) Referee for the Egyptian Engineering Day (EED), Cairo, Egypt, 1-3 August 2009.

7) Head of the editing and publishing committee of the Second Ain Shams University International Conference on Environmental Engineering, Cairo, Egypt, 2007. Also, I was participating in the technical and general management committees.
Secretary of the departmental meeting (EPM dept., Faculty of Engineering) during the academic year 2006/2007.