Full Name:
Hala A. Abdel Hady Hassan
Academic Rank:
Professor
ASU Email:
hala_hassan@eng.asu.edu.eg
Departmment:
Design and Production Engineering
Graduation Year:
1992


Degrees:
5/29/2011
Awards:
2008 فى مجال العلوم التكنولوجية المتقدمة- جائزة الدولة التشجعية
أفضل باجث قسم الهندسة الميكانيكية- هندسة عين شمس 2013
Books:
“Properties of Discontinuously Reinforced Metal Matrix: Composites and Laminates”, Reference Module in Materials Science and Materials Engineering (Comprehensive Composite Materials), Elsevier Ltd, Kidlington, UK, 2015


Published Research:
1. Hala A. Hassan et. al, “Effects of Composition Changes on Strength, Bend Ductility, Toughness, and Flex-Bending Fatigue of Iron-Based Metallic Glass Ribbons”, Met. & Matr. Trans. A, 43 (8), pp. 2697-2705, 2012

2. Hala A. Hassan, Adel B. El-Shabasy, John J. Lewandowski, “The effects of changes in test temperature and loading conditions on fracture toughness of a toughened Zr-based bulk metallic glass composite”, Mater. Sci. Eng. A, 540, pp. 97-101, 2012

3. Hala A. Hassan et. al, “Effects of load ratio, R, and test temperature on high cycle fatigue behavior of nano-structured Al–4Y–4Ni-X alloy composites”, Mater. Sci. Eng. A 558 (12), pp. 211-216, 2012

4. Hala A. Hassan et. al, “The effect of mixed mode I/II on the
fracture toughness and fracture behavior of nano-structured metal matrix composites”, Mater. Sci. Eng. A, 559, pp. 897-901, 2013.
5. Hala A. Hassan et. al “Effects of Mixed Mode Loading on the Fracture Toughness of Bulk Metallic Glass/W Composites” Materials Science and Engineering A, 586, pp. 413-417, 2013.
6. Hala A. Hassan et. al., “Effects of Particulate Volume Fraction on Cyclic Stress Response and Fatigue Life of AZ91D Magnesium Alloy Metal Matrix Composites”, Mater. Sci. Eng. A,, 600, pp. 188–194, l 2014,.
 A.B. El-Shabasy, H.A. Hassan, and J.J. Lewandowski, “Effects of load ratio, R, and test Temperature on High Cycle Fatigue Behavior of Nano-structured Al–4Y–4Ni–X alloy Composites”, Materials Science & Engineering A, 558, 2012, pp. 211-216.
 A.B. El-Shabasy, H.A. Hassan, and J.J. Lewandowski, “Effects of Composition Changes on Strength, Bend Ductility, Toughness, and Flex Bending Fatigue of Iron Based Metallic Glass Ribbons”, Metallurgical and Materials Transactions A, 43 (8), 2012, pp. 2697-2705.
 Hala A. Hassan, Adel B. El-Shabasy, and John J. Lewandowski “The Effects of Changes in Test Temperature and Loading Conditions on Fracture Toughness of a β Toughened Zr-based Bulk Metallic Glass Composite”, Materials Science and Engineering A, 540, 2012, pp. 97-101
 H. A. Hassan, “Effect of mixed mode I/II on fracture behavior of laminated metal matrix composites”, Materials Science and Technology, 27 (7), 2011, pp.1170-1176.

 Hala A. Hassan, Adel B. El-Shabasy, and John J. Lewandowski "Putting the heat on nano-composite aluminum alloys" Metal Powder Report, 64 (5), 2009, pp. 28-34.

 Hala A. Hassan and John J. Lewandowski, “Laminated Nanostructure Composite with Improved Bend Ductility and Toughness”, Scripta Mater., 61(11), 2009, pp. 1072-1074.

 Adel El-Shabasy, Hala Hassan, Yi Liu, Dingqiang Li and J. J. Lewandowski, "High Cycle Fatigue Behavior of a Nano-Structured Composite Produced via Extrusion of Amorphous Al89Gd7Ni3Fe Alloy Powders", Materials Science and Engineering A , 513-514, 2009, pp. 202-207.
 Hala Hassan, Adel B. El-Shabasy, M.H. Abd El-latif, “Utilization of the Agricultural Residues in Natural Fiber Polymer Composites (NFPCs)”, Third Ain Shams University International Conference on Environmental Engineering, April 14-16, 2009, Cairo Egypt.
 Hala A. Hassan and John J. Lewandowski, "Effects of Changes in Notch Radius and Test Temperature on the Toughness of a Nano-crystalline Aluminum Alloy Composites Produced via Extrusion of Amorphous Aluminum Alloy Powders., Materials Science and Engineering A, 497, December 2008, pp. 212-215.


 Hala A. Hassan, Laszlo Kecskes, and John J. Lewandowski, “Effects of Changes in Test Temperature and Loading conditions on Fracture Toughness of a Zr-based Bulk Metallic Glass, Metallurgical and Materials Transactions A, 39, Sept. 2008, pp. 2077-2085.

 Todd M. Osman, Hala A. Hassan, and John J. Lewandowski, “Interface Effects on the Quasi-Static and Impact Toughness of Discontinuously Reinforced Aluminum Laminates”, Metallurgical and Materials Transactions A, 39, August 2008, pp. 1993-2006.

 H. A. Hassan and J.J. Lewandowski, "Effect of High Temperature and Thermal Exposure on Fatigue Crack Propagation of Laminated Metal Composites LMCs", Mater. Sci. and Technology, 23(12), pp. 1505-1512, 2007.

 Hala A. Hassan, J.J. Lewandowski, M.H. Abd El-latif, “Effects of Change in Temperature on Fatigue Crack Growth of Adhesively Bonded A1 2080/SiC/20p-2080 A1 Laminated Composites”, Journal of Materials Science, 39, 2004, pp3063-3067.

 Hala A. Hassan, J.J. Lewandowski, M.H. Abd El-latif “Effects of Changes in Test Temperature on Fatigue Crack Propagation of “Al 6090/SiCp-Al 6013” Laminated Metal Composites”, Metallurgical and Materials Transactions A, 35A, 2004, pp2293-2305.

 Hala A. Hassan, J.J. Lewandowski, M.H. Abd El-latif, “Effects of Lamination and Changes in Layer Thickness on Fatigue Crack Propagation of Light Weight Laminated Metal Composites (LMCs)”, Metallurgical and Materials Transactions A, 35A, 2004, pp 45-52.


Published Research in Confernces:
Hala A. Hassan, and J.J. Lewandowski, “Summary of Interface Effects on Fracture and Fatigue of Laminated Aluminum Composites”, TMS 2008 Annual Meeting & Exhibition, March 9-13, New Orleans, Louisiana, pp. 463-470.
Alan Vormelker, Hala A. Hassan, Laszlo Kecskes, and John J. Lewandowski, “Effects of Changes in Test Temperature on Fracture Toughness of Bulk Metallic Glass/W Composites”, The Seventh International Conference on Tungsten and Hardmaterials, 8-12, 2008, Washington, DC, USA, pp.10/1-10.
Hala A. Hassan, A. B. El-Shabasy, and J.J. Lewandowski, “Fracture and Fatigue Crack Growth of Nano-Composite Aluminum Alloys”, 2008 World Congress on Powder Metallurgy and Particulate Materials, June 8-12, 2008, Washington, DC, USA, pp. 9/186-196.
Educational and Research Projects:
Not Available
Consulting and Engineering Projects:

Supervised Thesis:

Other:
Not Available