Full Name:
Adel Mohamed Moneeb Elsabbagh
Academic Rank:
Professor
ASU Email:
aelsabbagh@eng.asu.edu.eg
Departmment:
Design and Production Engineering
Graduation Year:
1998

بكالوريوس الهندسة الميكانيكية 1998
ماجستير الهندسة الميكانيكية 2001
دكتوراه الهندسة الميكانيكية 2005
أستاذ مساعد 2012
مدير مركز تنمية الصناعات الصغيرة 2007 - 2011
جائزة الدولة التشجيعية 2014
شاركت في العديد من الاستشارات الهندسية في مجال الصوتيات والاهتزازات
شاركت في أكثر من 35 ورقة بحثية
نشرت كتابين
شاركت في العديد من المشروعات البحثية والأكاديمية الممولة


Degrees:
University of Maryland, College Park, MD, USA
 Ph.D., Mechanical Engineering, December 2005
o Dissertation Topic: Gas-Filled Axisymmetric Acoustic Resonators
o Advisor: Prof. Amr Baz
 M.Sc., Mechanical Engineering, June 2004
o Non-thesis Master.
Ain Shams University, Abbasia, Cairo, Egypt
Department of Design and Production Engineering
 M.Sc., Mechanical Engineering, May 2001
o Thesis Topic: Application of Petri Nets in Production Scheduling
o Advisor: Prof. Amin El-Kharboutly
 B.Sc., Mechanical Engineering, June 1998
Awards:
جائزة الدولة التشجيعية 2014

Books:
 Adel Elsabbagh, Gas-Filled Axisymmetric Acoustic Resonators: Acoustic Compressor, VDM Verlag, 2008, ISBN: 3639093046.
 Mahran Mohamed, Negm Hani, Elsabbagh Adel, Aero-elastic Analysis of Plate Wings Using the Finite Element Method, Lambert Academic Publishing, ISBN: 3659679690.
 Adel Elsabbagh, Introduction to Finite Element Modeling for Engineers, registration number 2016-16360, Egyptian National Library and Archives.
Published Research:
1. M. Yangui, S. Bouaziz, M. Taktak, M. Haddar, and A. El-Sabbagh, Nonlinear Analysis of Twisted Wind Turbine Blade, Journal of Mechanics, Published online: 12 December 2016.
2. A. Allam, A. Elsabbagh, W. Akl, Modeling and design of two-dimensional membrane-type active 2 acoustic metamaterials with tunable anisotropic density, Journal of the Acoustical Society of America, accepted for publication 18 Oct 2016.
3. A. Elsabbagh, Nonlinear Finite Element Model for the Analysis of Axisymmetric Inflatable Beams, Thin-Walled Structures, 96, 2015, 307 – 313.
4. A. Abdulaziz, A. Elsabbagh, and T. Elnady, Using Acoustics Emission In Validating a New Design and Manufacturing Concepts of a Horizontal Axis Wind Turbine Blade, ICSV22, 22nd International Conference on Sound and Vibration, Florence, July 2015.
5. A. Zein, T. Elnady, and A. Elsabbagh, e-Laboratories for Sound and Vibration Education, ICSV22, 22nd International Conference on Sound and Vibration, Florence, July 2015.
6. M. Mahran, H. Negm, A. El-Sabbagh, and K. Maalawi, Aero-elastic analysis of composite plate swept wings using the finite element method, ICCS18, 18th International Conference on Composite Structures, Lisbone, June 2015.
7. A. Abdulaziz, A. Elsabbagh, W. Akl, Dynamic and Static Characterization of Horizontal Axis Wind Turbine Blades Using Dimensionless Analysis of Scaled-Down Models, International Journal of Renewable Energy Research-IJRER, 5, 2015.
8. M. Mahran, H. Negm, and A. El-Sabbagh, Aero-elastic characteristics of tapered plate wings, Finite Elements in Analysis and Design, 94, 2015, 24–32.
9. M. Hedaya, A. Elsabbagh, and A. Hussein, Weight minimization of truss structures subjected to dynamic loading, EngOpt2014 - 4th International Conference on Engineering Optimization, Lisbone, Sept 2014.
10. M. Hedaya, A. Elsabbagh, and A. Hussein, Safety factor maximization for trusses subjected to fatigue stresses, Engineering Optimization, 47(8), 2015, 1107-1124.
11. A. El-Sabbagh, and A. Baz, Topology optimization of unconstrained damping treatments for plates, Engineering Optimization, 2013, 1-16, DOI 10.1080/0305215X.2013.832235.
12. A. El-Sabbagh, Size optimization of stiffeners in bending plates, Mechanics of Advanced Materials and Structures, 20, 2013, 764-773.
13. W. Akl, A. Elsabbagh, A. Baz, Acoustic metamaterials with circular sector cavities and programmable densities, Journal of the Acoustical Society of America, 132 (4), 2012, 2857-2865.
14. A. El-Sabbagh, I. Taha, and R. Taha, Prediction of the modulus of elasticity of short fiber reinforced polymer composites by finite element modelling, Polymers and Polymer Composites, 19 (9), 2011, 733-742.
15. A. El-Sabbagh, and A. Baz, Maximization of the harvested power from piezoelectric bimorphs with multiple electrodes under dynamic excitation, Finite Elements in Analysis and Design, 47, 2011, 1232-1241.
16. Z. Ling, X. Ronglu, W. Yi, and A. El-Sabbagh, Topology optimization of constrained layer damping on plates using Method of Moving Assymptote (MMA) approach, Shock and Vibration, 18, 2011, 221-244.
17. M. Ramadan, W. Akl, T. Elnady, and A. Elsabbagh, Finite-element modeling of an acoustic cloak for three-dimensional flexible shells with structural excitation, Applied Physics A, Materials Science & Processing, 103, 2011, 641-644.
18. Z. Ling, W. Yi, Z. Dongdong, L. Yinong, and A. Elsabbagh, Vibration and damping characteristics of cylindrical shells with active constrained layer damping treatments under parametric variations, 17th International Congress for Sound & Vibration (ICSV17), Cairo, Egypt, 18-22 July, 2010.
19. Z. Ling, X. Ronglu, H. Zhimin, A. Elsabbagh, and A. Baz, Topology optimization of damping material layout to enhance energy eissipation of cylindrical shells, 17th International Congress for Sound & Vibration (ICSV17), Cairo, Egypt, 18-22 July, 2010.
20. A. Elsabbagh, T. Elnady, and W. Akl, Using virtual reality environment in the teaching of acoustics, 17th International Congress for Sound & Vibration (ICSV17), Cairo, Egypt, 18-22 July, 2010.
21. W. Akl, T. Elnady, A. Elsabbagh, and M. Ramadan, Improving acoustic cloak bandwidth using nonlinear coordinate transformation, 17th International Congress for Sound & Vibration (ICSV17), Cairo, Egypt, 18-22 July, 2010.
22. X. Ronglu, H. Zhimin, Z. Ling, and A. El-Sabbagh, Topology optimization of damping material layout to enhance energy dissipation of plates, The Third International Conference on Dynamics, Vibration and Control (ICDVC 2010), Hangzhou, China, 12 – 14 May 2010.
23. M. Ramadan, W. Akl, T. Elnady, A. El-Sabbagh, Finite element modeling of an acoustic cloak for three dimensional flexible shells with structural excitation, META'10, 2nd International Conference on Metamaterials, Photonic crystals and Plasmonics, Cairo, Egypt, 22 – 25 Feb 2010.
24. T. Elnady, A. Elsabbagh, W. Akl, O. Mohamady, V. Garcia-Chocano, D. Torrent, F. Cervera, and J. Sánchez-Dehesa, Quenching of acoustic bandgaps by flow noise, Applied Physics Letters, 94, 2009.
25. W. Akl, A. El-Sabbagh, K. Al-Mitani, and A. Baz, Topology Optimization of a Plate Coupled with Acoustic Cavity, International Journal of Solids and Structures, 46, 2009.
26. A. El-Sabbagh, W. Akl, and A. Baz, Topology Optimization of Periodic Mindlin Plates, Journal of Finite Elements in Analysis and Design, 44, 2008, p 439-449.
27. W. Akl, A. El-Sabbagh, and A. Baz, Optimization of the Static and Dynamic Characteristics of Plates with Isogrid Stiffeners, Journal of Finite Elements in Analysis and Design, 44, 2008, p 513-523.
28. W. Akl, A. El-Sabbagh, K. Al-Mitani, and A. Baz, Topology optimization of a plate coupled with acoustic cavity, Proceedings of SPIE, 6928, Active and Passive Smart Structures and Integrated Systems, 2008.
29. W. Akl, A. El-Sabbagh, and A. Baz, Finite Element Modeling of Plates with Arbitrary Oriented Isogrid Stiffeners, Mechanics of Advanced Materials and Structures, 15, 2007, p 130-141.
30. A. El-Sabbagh, and A. Baz, Nonlinear Oscillations of Acoustic Resonators, Proceedings of Smart Structures and Materials, China, 2007.
31. L. Zheng, Y. Li, A. Baz, and A. El-Sabbagh, The Application of Nonlinear Energy Sinks Controller in a Full Car Semi-Active Suspension System with MR Dampers, Proceedings of Smart Structures and Materials, China, 2007.
32. A. El-Sabbagh, and A. Baz, A coupled nonlinear model for axisymmetric acoustic resonators driven by piezoelectric bimorphs, Mechanics of Advanced Materials and Structures, 13, 2006, p 205-217.
33. A. El-Sabbagh, and A. Baz, Finite element modeling of the nonlinear oscillations in axisymmetric acoustic resonators, Journal of Finite Elements in Analysis and Design, 42, 2006, p 1281-1290.
34. A. El-Sabbagh, and A. Baz, Vibration control of beams using constrained layer damping with functionally graded viscoelastic cores: Theory and experiments, Proceedings of SPIE, 6169, Smart Structures and Materials 2006: Damping and Isolation, 2006.
35. A. El-Sabbagh, and A. Baz, Effect of static, dynamic, thermal and humidity loading on fatigue Life of fiber optic cables, Mechanics of Advanced Materials and Structures, Proceedings of SPIE, 5391, Smart Structures and Materials 2004: Sensors and Smart Structures Technologies, p 274-285, 2004.
36. A. El-Sabbagh, and A. El-Kharboutly, Applications of Petri nets in production scheduling, PEDD6, 2002.

Published Research in Confernces:

Educational and Research Projects:
Not Available
Consulting and Engineering Projects:
 Environmental Impact Assessment (EIA) of the construction work in the new runway at Cairo airport.
 Noise control of centrifugal pumps at Rod Elfarag pumping plant for potable water.
 Environmental Impact Assessment (EIA) of Abu Dhabab Mine project.
 Noise control of air conditioning units in Safeer Hotel.
 Design of skids for oil pumps in Tanzania for Mantrac, Egypt.
 Noise study for Khafji Joint Operations, Saudi Arabia.
 Analysis of vibration levels predicted due to the installation of presses at Olympic Factory.
 Design of Vibration Isolation for a 350 ton presses at Olympic factories.
 Design and vibration analysis of power generation skids for Mantrac Petro-Shahd.
 Vibration Analysis for Electrolux, 2016.
 Type testing of water flow meters for the Water Holding Co.
 Conceptual design of a 1.5 MW wind turbine.
 Design of Hydrostatic Testing Machine of Concrete Pipes, NPC Co.
 Analysis of the causes of excessive vibrations and design modifications for industrial fans at Royal Cement Co.
 Failure analysis of semi-trailers for Arab Contractors Co.
 Analysis of the causes of excessive vibrations in Camilla washing machines produced by GMC.
 Failure analysis for Gearboxes at P&G.
 Failure analysis of piping systems in Sheikh Zayed City.
 Failure of asphalt crushers.
Supervised Thesis:
 Mohamed Hedaya, Optimization of Skeleton Structure Design under Dynamic Loading, Ph.D., 2009 – 2015.
 Shady Sedky, A Novel Method for Fixation of Weber B Distal Fibular Fractures Using Posterolateral Plating A Biomechanical Comparative Study versus Lateral Neutralization Plating, Ph.D., 2009 – 2014.
 Mohamed Kasem, Tailoring of Composite Swept Wings for Enhanced Aero-elastic Characteristics, M.Sc., 2010 – 2014.
 Ahmed Okasha, Source Charactrization of compressors and mitigation measure of vibration induced failures, M.Sc., 2011 – 2014.
 Tharwat Hegazy, Mathematical Modeling and Optimization of Vibro-hammers, Incomplete Ph.D., 2008-2013
 Eman Zidan, Noise Prediction Models of Wind Turbines, M.Sc., 2010 – Present.
 Ahmed Abdulaziz, Testing of Segmented Wind Turbine Blade, M.Sc., 2012 – Present.
 Abdullah Uthman, Design and Manufacturing of Segmented Wind Turbine Blades, M.Sc., 2011 – Present.
 Yehia Zakareya, Remote Sensing of the Dynamics of Rotating Beams, Incomplete M.Sc., 2013 – 2015.
 Ahmed Allam, Wave Propagation Control Using Active Acoustic Metamaterials, M.Sc., 2013 – 2017.
 Julia Fahim, Structural Optimization of Horizontal Axis Wind Turbine Blades, M. Sc., 2014 – Present.
 Sherif Okda, Design and Manufacturing of Inflatable Wind Turbine Blades, M. Sc., 2015 – Present.

Other:
Not Available