Full Name:
Tamer Mohamed Elnady
Academic Rank:
Professor
ASU Email:
tamer.elnady@eng.asu.edu.eg
Departmment:
Design and Production Engineering
Graduation Year:
1997

- Member of the Council of Advisors for the President in Education and Scientific Research
- A member of the EU ERASMUS+ National Higher Education Reform Expert team (the HERE – Egypt team).
- Founder and President of the Acoustical Society of Egypt.
- One of the developers of SIDLAB Software, a 1D simulation code for the propagation of sound waves inside ducts.
- Chair of the local organizing committee of the 17th International Congress of Sound and Vibration (ICSV), 18-22 July 2010.
- Member of the technical committee at the Egyptian Ministry for Environmental Affairs, whose job is to revise the noise regulations in the Egyptian Law for Environment.
- Member of the technical committee at the Housing and Building Research Center (HBRC), whose job is to develop a new code for acoustics and vibrations in buildings.
- Regional Focal Point coordinator for X-Noise, Aircraft External Noise Network in the Arab-Mediterranean Countries.
- Member of the Board of Directors for the International Institute for Acoustics and Vibrations (IIAV).
- Member of the Editorial Board of “Advances of Acoustics and Vibration” Journal.
- Chair of the organizing committee of the 1st COMSOL Users Conference in the Arab Countries, Dhahran, 12-13 January, 2009.
- Member of the MEMEC EXPO International Advisory Committee, held regularly in Bahrain, 1st one held in 2007 and second one to be held in 2009.
- Member of the scientific committee International Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), organized by the British University in Cairo, 4-6 Jan 2009.
- Reviewer at several international and national journals: The International Journal of Acoustics and Vibrations (IJAV), AIAA Journal, Applied Acoustics, Journal of Environmental Sciences.


Degrees:
6/27/2011
Awards:
Egyptian State Incentive Award in Engineering Sciences for 2010
Books:
1. T. Elnady 2009. Modeling and Characterization of Perforates in Lined Ducts and Mufflers. VDM-Publishing, Germany. ISBN: 978-3-639-15699-7
2. T. Elnady and H. Bodén 2007, Sound and Vibration. Edited a translated version of the Swedish Course Book “Liud och Vibrationer”.

Published Research:
1. C. Othmani, T. Hentati, M. Taktak, T. Elnady, T. Fakhfakh and M. Haddar, 2014. Effect of Liner Characteristics on the Acoustic Performance of Duct Systems, accepted for publication at Archives of Acoustics
2. T. Elnady, M. Åbom and Y. Yang, 2014. Systematic Optimization of an Exhaust System to Meet Noise Radiation Criteria at Idle, SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 7(3). doi:10.4271/2014-01-0006.
3. D. Herrin, X. Hua, Y. Zhang and T. Elnady, 2014. The Proper Use of Plane Wave Models for Muffler Design," SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 7(3). doi:10.4271/2014-01-0016.
4. X. Hua, D.W. Herrin, T.W. Wu, and T. Elnady, 2013. Simulation of diesel particulate filters in large exhaust systems, Applied Acoustics, Vol. 74(12), pp 1326–1332.
5. T. Elnady, S. Elsaadany, and D. W. Herrin, 2011. Investigation of the Acoustic Performance of After Treatment Devices, SAE International Journal of Passenger Cars– Mechanical Systems, Vol. 4(2).
6. T. Elnady, S. Elsaadany, and M. Åbom, 2011. Flow and Pressure Drop Calculation using Two-ports, ASME Journal of Vibration and Acoustics, Vol. 133(4), pp 041016/1-8.
7. M. Ramadan, W. Akl, T. Elnady, and A. Elsabbagh, 2011. Finite Element Modeling of an Acoustic Cloak for Three Dimensional Flexible Shells with Structural Excitation. Journal of Applied Physics A: Materials Science and Processing, DOI 10.1007/s00339-011-6247-x.
8. T. Elnady, M. Åbom, and S. Allam, 2010. Modeling Perforated Tubes in Mufflers using Two-ports, ASME Journal of Vibration and Acoustics, Vol. 132(6).
9. T. Elnady, H. Bodén, and B. Elhadidi, 2009. Validation of an Inverse Semi-Analytical Technique to Educe Liner Impedance, AIAA Journal, Vol. 47(12).
10. T. Elnady, A. Elsabbagh, W Akl, V. Garcia-Chocano, D. Torrent, F. Cervera and J. Sanchez-Dehesa 2009. Quenching of acoustic bandgaps by flow noise, Applied Physics Letters, 94, 134104, April 2009.

Published Research in Confernces:
1. A. Abosrea, T. Elnady and W. Elsallamy, 2015. Flow generated noise inside mufflers, Inter-Noise 2015, San Francisco, USA, August 9-12.
2. M. Wagih and T. elnady, 2015. Modeling industrial mufflers using two-ports, Inter-Noise 2015, San Francisco, USA, August 9-12.
3. A. Zein, T. Elnady, A. Elsabbagh and Hans Bodén, 2015. E-Laboratories for Sound and Vibration Education, 22nd International Congress on Sound and Vibration (ICSV), Florence, Italy, July 12-16.
4. A. Abdulaziz, A. Elsabbagh and T. Elnady, 2015. Using Acoustic Emission in validating a new design and manufacturing concepts of a horizontal axis wind turbine blade, 22nd International Congress on Sound and Vibration (ICSV), Florence, Italy, July 12-16.
5. M. Farooqui, T. Elnady, R. Glav and T. Karlsson, 2015. Modeling and Characterization of a Novel Porous Metallic Foam Inside Ducts, SAE 2015 Noise and Vibration Conference and Exhibition, Grand Rapids, USA, 23-25 June.
6. W. Elsahar and T. Elnady, 2015. Measurement and Simulation of Two-Inlet Single-Outlet Mufflers, SAE 2015 Noise and Vibration Conference and Exhibition, Grand Rapids, USA, 23-25 June.
7. M. Farooqui, T. Elnady and W. Akl, 2015. Low Frequency noise attenuation inside ducts using locally resonant periodic flush mounted steel patches, EuroNoise 2015, 31 May - 3 June, Maastricht
8. E. Zidan, T. Elnady and A. Elsabbagh, 2014. Comparison of Sound Power Prediction Models of Wind Turbines, Proceedings of the International Conference on Advances in Agricultural, Biological & Environmental Sciences (AABES-2014), Dubai, UAE, Oct 15-16, pp. 67-73.
9. M. Wagih, T. Elnady, and M. Åbom, 2014. Analysis of Flow and Sound Propagation in HVAC Ducts Using Two-Ports, ASHRAE Summer Conference, Seattle, USA, June 28 – July 2.
10. L. Zhou, H. Bodén, C. Lahiri, F. Bake, L. Enghardt, S. Busse-Gerstengarbe and T. Elnady, 2014. Comparison of impedance eduction results using different methods and test rigs, AIAA Aviation and Aeronautics Forum and Exposition 2014, Atlanta, USA, June 16-20.
11. R. Kabral, L. Zhou, H. Bodén and T. Elnady, 2014. Determination of liner impedance under high temperature and grazing flow conditions, AIAA Aviation and Aeronautics Forum and Exposition 2014, Atlanta, USA, June 16-20.
12. T. Elnady, M. Åbom, and Y. Yang, 2014. Systematic Optimization of an Exhaust System to Meet Noise Radiation Criteria At Idle, SAE 2014 World Congress and Exhibition, Detroit, USA, April 8-10.
13. D.W. Herrin, X. Hua, Y. Zhang, and T. Elnady, 2014. The Proper Use of Plane Wave Models for Muffler Design, SAE 2014 World Congress and Exhibition, Detroit, USA, April 8-10.
14. W. Elsahar, T. Elnady, and M. Åbom, 2013. Validation of two-port temperature models for heat dissipation in exhaust systems, 166th Meeting of the Acoustical Society of America, San Francisco, December 2-6.
15. M. Farouqui, W. Akl, and T. Elnady, 2013. Sound attenuation in ducts using locally resonant periodic flush mounted flexible silicon aerogel patches, 166th Meeting of the Acoustical Society of America, San Francisco, December 2-6.
16. M. Wagih, T. Elnady, and M. Åbom, 2013. Analysis of duct networks at high frequencies using two-ports, Inter-Noise 2013, Innsbruck, Austria, September 16-18.
17. A. Okasha, T. Elnady, and M. Åbom, 2013. Acoustic response analysis of pipeline networks using two-ports, Inter-Noise 2013, Innsbruck, Austria, September 16-18.
18. T. Elnady, W. Elsahar, and M. Åbom, 2012. Estimation of temperature drop in exhaust systems, Inter-Noise 2012, New York, USA, August 19-22.
19. W. Elsahar, T. Elnady, and D. Herrin, 2012. Modeling DPF units beyond the plane wave range, Inter-Noise 2012, New York, USA, August 19-22.
20. X. Hua, D. Herrin, T. Wu, and T. Elnady, 2012. Simulation of diesel particulate filters in large exhaust systems, Inter-Noise 2012, New York, USA, August 19-22.
21. S. Elsaadany, T. Elnady, M. Åbom, and S. Boij, 2011. Optimization of Exhaust Systems to Meet the Acoustic Regulations and the Engine Specifications, 18th International Congress on Sound and Vibration, Rio de Janeiro, Brazil, July 10-14.
22. T. Elnady, S. Elsaadany, and D. W. Herrin, 2011. Investigation of the Acoustic Performance of After Treatment Devices, SAE 2011 Noise and Vibration Conference and Exhibition, Grand Rapid, USA, May 2011.
23. X. Hua, J. Liu, D. W. Herrin, and T. Elnady, 2011. Numerical Simulation of Diesel Particulate Filters in Exhaust Systems, SAE 2011 Noise and Vibration Conference and Exhibition, Grand Rapid, USA, May 2011.
24. W. Akl, T. Elnady, A. Elsabbagh, and M. Ramadan, 2010. Improving acoustic cloak bandwidth using nonlinear coordinate transformations, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
25. A. Elsaabagh, T. Elnady, and W. Akl, 2010. Using Virtual Reality Environment in the Teaching of Acoustics, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
26. T. Elnady, M. Åbom, and S. Elsaadany, 2010. Acoustic Response Analysis of Oil & Gas Pipeline Networks to Prevent their Fatigue and Failure, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
27. S. Elsaadany, T. Elnady, M. Åbom, and S. Boij, 2010. Insight into Exhaust Systems Optimization Techniques, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
28. O. Mohammady, G. El-Bayoumi, M. Bayoumi, B. Elhadidi, and T. Elnady, 2010. Analysis, Design, and Implementation of a Sound Tracking System to Track a Moving Object, 17th International Congress on Sound and Vibration, Cairo, Egypt, July 18-22.
29. T. Elnady, W. Akl, A. Elsabbagh, O. Mohammady, and Hans Bodén, 2010. Flat Sensors for Acoustic Pressure Measurements. 16th AIAA/CEAs Aeroacoustics Conference, Stockholm, Sweden, June 7-9.
30. M. Ramadan, W. Akl, T. Elnady, and A. Elsabbagh, 2010. Finite Element Modeling of an Acoustic Cloak for Three Dimensional Flexible Shells with Structural Excitation. International Conference on Metamaterials, Photonic crystals and Plasmonics, Cairo, Egypt, February 22-25.
31. T. Elnady, S. Elsaadany, and M. Åbom, 2009. Investigation into Modeling of Multi-Perforated Mufflers, 16th International Congress on Sound and Vibration, Krakow, Poland, July 6-9.
32. T. Elnady, 2009. Operational Modal Analysis of Ramses II Statue, International Operational Modal Analysis Conference IOMAC, Ancona, Italy, May 2-4.
33. A. Kamal, T. Elnady, and A.Yones, 2009. Parametric Study of Sound Attenuators for Industrial Fans, BUE Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, January 4-6.
34. W. El-Sallamy, T. Elnady, W. Akl, and T. Osman, 2009. Investigation of Active Noise Control in Ducts, BUE Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, January 4-6.
35. W. El-Sallamy, T. Elnady, T. Osman, and A. Khattab, 2009. Active Noise Control in Flow Ducts, BUE Conference on Advanced Materials for Application in Acoustics and Vibration (AMAAV), Cairo, Egypt, January 4-6.
36. T. Elnady, S. Elsaadany, and M. Åbom, 2008. Flow and Pressure Drop Calculation using two-ports, 15th International Congress on Sound and Vibration, Daejeon, Korea, July 6-10.
37. T. Elnady, 2007. A Platform to Measure Transmission Loss of Mufflers with Flow, Inter-Noise 2007, Istanbul, Turkey, August 28-31.
38. T. Elnady, 2007. Vibration Measurements during the Relocation of Ramses II Statue, Inter-Noise 2007, Istanbul, Turkey, August 28-31.
39. T. Elnady and H. Bodén, 2007. A Tempus experience: New Curriculum in Sound and Vibration Control in Egypt. 14th International Congress on Sound and Vibration, Cairns, Australia, July 9-12.
40. T. Elnady and M. Åbom, 2006. SIDLAB: new 1D sound propagation simulation software for complex duct networks, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
41. Y. Elnemr and T. Elnady, 2006. Design, construction, and validation of a reverberation room, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
42. R. Fairbrother, M. Åbom, T. Elnady, F. Ollivier, 2006. Linear acoustic simulation and experimental characterization of a modular automotive muffler, 13th International Congress on Sound and Vibration, Vienna, Austria, July 2-6.
43. T. Elnady, M. Musharrof, H. Bodén, B. Elhadidi, 2006. Validation of an Inverse Analytical Technique to Educe Liner Impedance with Grazing Flow, 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May 8-10, 2006-2639.
44. S. Tawfik, and T. Elnady, 2006. Arabic computer-based remediation program, a new development: Acoustic Manipulation, Central Auditory Processing Disorder “From Theory to Clinical Practice”, Marriott Hotel, Cairo, March 25-26.
45. T. Elnady and M. Åbom, 2005. Modeling perforates in mufflers using two-ports, 12th International Congress on Sound and Vibration, Lisbon, Portugal, July. 11-14.
46. T. Elnady and H. Bodén, 2004. Direct Calculation of Liner Impedance from its Indirect Measurement, 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May 23-25.
47. T. Elnady, 2005. Investigation of Mode Scattering by Hard Strips in Lined Ducts Using Collocation, Eleventh International Conference on Aerospace Sciences and Aviation Technology, Military Technical College, Cairo, May 17-19.
48. T. Elnady, 2005. Acoustic Network Models for Perforated Tube Mufflers, First Ain Shams International Conference on Environmental Engineering, Cairo, April 9-11.
49. T. Elnady and H. Bodén, 2004. An Inverse Analytical Method for Extracting Liner Impedance from Pressure Measurements. 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, May 10-12, 2004-2836.
50. T. Elnady, H. Bodén and T. Kontio, 2004. Impedance of SDOF liners at high temperatures, 10th AIAA/CEAS Aeroacoustics Conference, Manchester, UK, May 10-12, 2004-2842.
51. T. Elnady and H. Bodén, 2003. Mode Scattering by Hard Strips in Lined ducts. 10th International Congress on Sound and Vibration, Stockholm, Sweden, July. 7-10.
52. T. Elnady and H. Bodén, 2003. On semi-empirical liner impedance modeling with grazing flow. 9th AIAA/CEAS Aeroacoustic Conference, Hilton Head, SC, USA, May 12-14, 2003-3304.
53. T. Elnady and H. Bodén, 2002. Hard strips in lined ducts, 8th AIAA/CEAS Aeroacoustic Conference, Breckenridge, CO, USA, Jul. 17-19, 2002-2444.
54. T. Elnady, 2002. Impedance modeling of acoustic liners, Sixth International Conference on Production Engineering and Design for Development (PEDD-6), Cairo, Egypt, Feb. 12-14.
55. T. Elnady and H. Bodén, 2001. Application of the point matching method to model circumferentially segmented non-locally reacting liners, 7th AIAA/CEAS Aeroacoustic Conference, Maastricht, The Netherlands, May. 28-30, 2001-2202.
56. T. Elnady, 2000. Noise Assessment in Egyptian Airports, Year 2000 International Airport Noise Symposium, San Diego, CA, USA, Feb. 14-16.

Educational and Research Projects:
2015 Egyptian Academy for Scientific Research 1 year project titled: Control of sound recording inside studios
2015 STDF-British Council (Newton-Mosharafa, Institutional Links) Presence in the Past: Preservation of Egyptian maritime archaeological sites through 3D digital modelling and Virtual Reality presentation in the laboratory for modern day exploration of lost heritage
2014 EU-Egypt Innovation Fund (RDI) 1.5 years project titled: e-Laboratories for Chemistry Education
2013 European Commission Tempus-AIP: 3 year project on Academic-Industry Partnership towards Development of Trainers and Educators for Technicians in Egypt.
2012 Science and Technology Development Fund Capacity Building Grant: 1 year project to establish a Research Center for Acoustics, Vibration and Smart Structures.
2012 European Commission Tempus-VirCult: 3 year project on Using Virtual Reality in Cultural Heritage Education.
2012 Egyptian Academy for Scientific Research 2 years cooperation project with National Engineering School of Sfax, Tunisia. Acoustical characterization of acoustic liner materials from agriculture wastes.
2011 European Commission (FP7) FlowAirS: 4 year Marie Curie Initial Training Network (ITN) on Silent Air Flows in transport, buildings, and power generation.
2011 European Commission Tempus-eLab: 3 year project on the development of e-Laboratories for Physics and Engineering Education.
2011 European Commission Tempus-CERES: 3 year project on Clean Energy and Research in Environmental Studies
2010 Information Technology Industry Development Agency (ITIDA) 18 months project titled: Prototyping Metamaterial Antennas
2010 European Commission Tempus-AES: 3 year project on the development of new curricula for Advanced Engineering Systems, and Bridging the Gap between Academia and Industry
2010 European Commission (FP7) 4 years project titled: X-Noise EV. This is a continuation of the FP6 project X3-Noise which is a Network of Excellence.
2010 Science and Technology Development Fund 3 years project titled: Innovative Techniques for Design and Manufacturing of Wind Turbine Blades. The study covers a new technique to manufacture wind turbine blades and its effect on flutter and acoustics.
2009 EU-Egypt Innovation Fund (RDI) 1.5 years project with KTH and others titled: Acoustic Response Analysis of Oil & Gas Pipeline Networks to Prevent their Fatigue and Failure
2009 US-Egypt Joint Research Grants 2 year project with the University of Kentucky. Simulation of Diesel Particulate Filters in Exhaust Systems
2009 Spanish Agency for Intl. Cooperation 1 year project with the University of Madrid. Modeling and Optimization of Thermo Acoustic Heat Engine.
2009 Swedish Research Council Swedish Research Links: 3 year Project. Simulation of High Frequency Sound in Ducts
2009 European Commission Tempus-MSV: 3 year project. Development of a Masters of Engineering Program in Sound and Vibration
2009 European Commission (FP7) 4 years project titled: Optimization for low Environmental Noise impact AIRcraft (OPENAIR). A large project with 47 partners from all over Europe. Ain Shams University role is to develop and characterize a new paint sensor.
2008 Spanish Agency for Intl. Cooperation 1 year project with the University of Valencia. Acoustic Control using Phononic Crystals
2007 European Commission Tempus-VRLab: 3 year project. Using Virtual Reality in Engineering Education. Establishment of the first Virtual Reality Lab in Egypt.
2006 European Commission (FP6) X3-Noise: 4 year project. Aircraft External Noise Research Network and Coordination. The ASU Sound & Vibration Lab is the Regional Focal Point for this network in the Arab-Mediterranean Countries.
2006 Swedish Research Council Swedish Research Links: 3 year Project. Reduction of noise using microperforates.
2004 European Commission Tempus-SvibCon: 3 year project. The coordinator. Development of new curricula for sound and vibration control at Ain Shams University with cooperation with the Royal Institute of Technology in Stockholm and the Institute of Sound and Vibration Research in Southampton. Establishment of the first Acoustics Lab. in an Egyptian University.
2003 Swedish Research Council Swedish Research Links: 3 year Project. Reduction of Aircraft Jet Engine Noise Using Liners.
2003 European Commission (FP6) ARTEMIS: 3 year Project. Modeling of inlet/outlet noise from turbo-charged diesel engines. Modeling of a complicated Renault Laguna perforated silencer.
2000 Swedish Defense Material Administration FMV NFFP: 3 year Project. Hot stream acoustic liners.
2000 European Commission (FP5) DUCAT: 3 year Project. Basic research on duct acoustics and radiation. Modeling of non-locally reacting liners and added a model for spliced liners.

Consulting and Engineering Projects:
2015 Orascom Construction Thermal and Acoustics Re-design for some spaces inside the Grand Egyptian Museum.
2014 Umfotec, Germany Commissioning of a test rig for the measurement of muffler acoustic performance.
2014 Mantrac, Egypt Structural Design of an Enclosure Shelter for Diesel Generator
2013 TJFAW, China Design optimization of a passenger car exhaust system.
2013 Khafji Joint Operations, Saudi Arabia KJO Noise Survey Program. Development of an Environmental Noise Division at KJO, noise survey and measurements for the whole site including on and off-shore facilities.
2012 Petrofac, UAE Noise modeling and Noise study report for central processing facilities Phase I for Badra oil field, Iraq.
2012 Barloworld Equipment, Namibia Noise measurements and control for Anixas 22 MW Diesel Power Station, Walves Bay, Namibia
2012 Mantrac, Egypt Structural Design of an engine skid for Oil pump in Tazama, Tanzania.
2011 Dolphin Power, Qatar Validation of a Public Address / General Alarm System in a Tank farm
2010 Environmental Consulting Bureau, Saudi Arabia Noise Impact Assessment for Saudi Aramco Jubail Export Refinery
2010 Qatar Construction Company QCON Troubleshooting an existing Public Address / General Alarm System in a Tank farm
2010 Ozone Intl., UAE Noise Mapping of Alsawah Island, Abu Dhabi
2009 General Electric, France Propose and analyze new noise control solutions for Gas Turbines.
2009 Wärtsilä, Finland Modeling of Selective Catalytic Reducer (SCR) Systems.
2009 Ministry of Foreign Affairs, Saudi Arabia Measurement of Sound Power of Fan Coil Units to be installed in the new building for the Saudi Embassy in Cairo
2009 Japan International Cooperation Agency Noise impact study for underground Line number 4 in Greater Cairo.
2009 Egyptian Airport Co. Selection of Noise monitoring Terminals locations around Hurghada Airport
2009 Saudi Aramco Study of the mechanical stresses for sleeve pipes used to surround corroded parts of oil pipelines.
2009 Materials Laboratory in Dubai Design of Advanced system to measure measure Sound Reduction Index of Building Materials according to ASTM E90.
2009 Qatar Construction Company QCON Design of Public Address / General Alarm System for Common Low Sulphur Condensate Storage & Export Facilities.
2008 Environics Noise Impact Assessment for El-Ezz Steel Plants at Ein Elsokhna.
2008 Environics Noise Impact Assessment for Abu Dabbab Mine at Safaga.
2008 Saudi Aramco Conduct a parametric study using Finite Element Analysis of the variation the electrical impedance between 2 electrodes surrounded by fluids within a range of (Resistivity, fluid velocity, frequency) parameters.
2008 Safeer Hotel Noise Control of Air Conditioning Chillers on top of the building.
2008 Caterpillar Technical Center, USA Manufacturing and validation of muffler test rig elements. Measurements of acoustic properties of selected muffler elements.
2008 Wärtsilä, Finland Research and Development of a new theory for the prediction of the acoustic properties of big resistive mufflers.
2008 Environex Noise Impact Assessment for a Refinery at Ein Elsokhna.
2007 Materials Laboratory in Dubai Design, implementation and personnel training for a system to measure Sound Reduction Index of Building Materials according to ASTM E90.
2007 Wärtsilä, Finland Development of a software for the design of Diesel Engine exhaust systems installed on ships.
2007 Egyptian Company for Potable Water Study on the noise control of the main pumping plant at Rod Elfarag (8 Pumps, each 1750 kW).
2007 Egat Factory Measurement of Sound Power of fan coil units according to ISO 3744
2007 Cairo Airport Authority Environmental Impact Assessment during the construction works of the new runway at Cairo International Airport.
2006 Supreme Council for Antiquities in Egypt Vibration measurements and monitoring during the project of relocation of Ramses II statue (weight = 83 tons, height = 12 m).
2006 Procter & Gamble – Egypt Noise control in the packing area.
2006 Caterpillar Technical Center, USA Muffler Design and Measurement.
2005 Audiology Unit, ASU Acoustic Manipulation within the development of a computer software for Language Learning Impaired Children.
2005 Swenox AB, Sweden Development of a Matlab Toolbox for the design of exhaust systems.
1999 Becktel Co. Environmental Noise Assessment in Sidi Krer Power Generation Plant.
1999 Egyptian Civil Aviation Authority Noise pollution assessment for International Airports in Egypt. (Aswan, Sharm Elsheikh, Elnozha and Taba International Airports)
1998 KasemTex Co. Vibration damping for textile machines located on the second floor of a concrete building.
1998 Ministry of the Environment EGY Evaluation of the environmental consequences and effect on urban life of Sinbad Funfair.
1998 National Gas Company. Evaluation of the environmental consequences and effect on urban life of a natural gas pressure-reduction station while it is being built.
1997 Shlumberger Logelco Inc. Design, manufacture and testing of a vibration-free rack mounted on trucks for the transportation of some electronic tools.

Supervised Thesis:

Other:
Not Available