Full Name:
Samy Jimmy Samy Ebeid
Academic Rank:
Emeritus Professor
ASU Email:
samy_ebeid@eng.asu.edu.eg
Departmment:
Design and Production Engineering
Graduation Year:
1968

Samy J. Ebeid, Ph.D is an Emeritus Professor at the “Design and Production Engineering” Department of Ain Shams University in Cairo – Egypt. The main research interests lie in the fields of Recent Manufacturing Processes (ECM – EDM – LASER – AM …etc), Machine Design and Stress Analysis. Samy J. Ebeid has around 60 local and international publications covering the mentioned fields. Samy J. Ebeid is also a referee for international journals in addition was a member of the Egyptian scientific committee for the promotion of professors and a member of the Egyptian national committee for welding technology.


Degrees:
B.Sc. Mechanical Engineering, 1968
M.Sc. Mechanical Engineering, 1972
Ph.D. Mechanical Engineering, 1975
Awards:
Not Available
Books:
1. Mechanical and Electrical Drawing, Fac. of Eng., Ain Shams Univ.
2. Machine Design Notes.
3. رسم فني للصف الثاني بالمدارس الفنية الصناعية المتقدمة
نظام السنوات الخمس
تخصص: آلات ومعدات كهربية - نقل وتوزيع الطاقة الكهربية

Published Research:
1 Prediction Of ECM Shapes By Complex Functions, The Bulletin of the Fac. of Engg., Ain Shams Univ., No. 8, 1978.
2 The Effect of Electro-Spark Hardening on the Wear Resistance of High Speed Steel, WEAR, 71, 1981.
3 Beneficial Effect of Air-Electrolyte Mixtures in Stationary ECM, Precision Engineering, 0141-6359/81/040, 1981.
4 High Speed Electrochemical Boring, Precision Engineering, Vol. 10. No. 2, 1988.
5 Flexible Feed Control System for Producing Predefined Shapes by ECM, The Bulletin of the Fac. of Engg., Ain Shams Univ., Vol.30, No. 4, Dec., 1995.
6 The State-of-the-Art of Micro-Wire Electrical Discharge Machining, Proc. of MDP-8, Cairo University on Mechanical Design and Production, Egypt, 4-6 Jan. 2004.
7 Towards higher accuracy for ECM hybridized with low-frequency vibrations using the response surface methodology, Journal of Materials Processing Technology, Volume 149, Issues 1-3 , pp 432-438, June, 2004,.
8 Mathematical Modeling for Wire Electrical Discharge Machining of Aluminum-Silicon Carbide Composites, Proc. of the 34th Int. MATADOR Conference, Manchester, UK., 7-9 July, 2004.
9 Surface Improvement through Hybridization of Electrochemical Turning and Roller Burnishing based on the Taguchi Technique, Proc., IMechE Vol. 219 Part B: J. Engineering Manufacture, 2005.
10 Modeling the Performance of ECM Assisted by Low Frequency Vibrations, 7th International Conference on Production Engineering for Design and Development PEDD 7, Cairo, Egypt, 7-9 February, 2006. Also accepted for publication in the Journal of Materials Processing Technology 2007, (PROTECH 10649 1-7).
11 Mathematical Modeling for Sculpture Shaping by ECM using a Simple Spherical Tool, The Bulletin of the Faculty of Engineering, Ain Shams University, Vol. 42, No. 3, pp 1053-1067, Sep. 2007
12 A New Approach towards ECM Sculpture Shaping using the Taguchi Technique, The Bulletin of the Faculty of Engineering, Ain Shams University, 2007
13 Analysis of the Draping Behaviour of Multi-Layer Textiles using Digital Image Processing, Polymers and Polymer Composites, Vol. 20 (9), pp. 837-844., 2012.
14 Comparison of Picture Frame and Normalized Tensile Tests for the Determination of the Shear Lock Angle in Natural Fiber Woven Fabrics, (under publication)
15 Description of Draping Behaviour of Woven Fabrics Over Single Curvatures by Image Processing and Simulation Techniques", Composites Part B: Engineering, 2012. http://dx.doi.org/10.1016/j.compositesb.2012.06.004.
16 Prediction of Draping Behaviour of Woven Fabrics over Double-Curvature Moulds using Finite Element Techniques", Vol.1 No.2 of the International Journal of Material and Mechanical Engineering (IJMME), 1 25-31, 2012.
17 Comparison of picture frame and bias-extension tests for the characterization of shear behaviour in natural fibre woven fabrics, Fibers and Polymers, 14 (2013) 338-344, 2013.
18 Prediction of Abrasive Water Jet Plain Milling Process Parameters Using Artificial Neural Networks, Journal of Machinery Manufacturing and Automation, Sept. 2014, Vol. 3 Iss. 3, PP. 56-73.
19 Finite Element Analysis of Non Parallel Face Flanges under Thermal and Mechanical Combined Loading, IJISET - International Journal of Innovative Science, Engineering & Technology, Vol. 1 Issue 9, November 2014.
20 Shakedown and limit load of pipe bends with local wall thinning under combined internal pressure and cyclic in-plane bending moment, IJISET - International Journal of Innovative Science, Engineering & Technology, Vol. 1 Issue 10, December 2014.
21 Improved energy efficiency in troughed belt conveyors: Selected factors and effects, International Journal of Engineering and Technical Research (IJETR) ISSN: 2321-0869, Volume-3, Issue-6, June 2015.
22 Strain Sensing Behaviour of 3D Printed Carbon Black Filled ABS, (under publication).
23 Mechanical Design Aspects of Single Screw Extruders using Finite Element Analysis, IJETR/03/2622, 2015.
24 Effect of Geometry and Rotational Speed on the Axial Pressure Profile of a Single Screw Extrusion, IJISET - International Journal of Innovative Science, Engineering & Technology, vol. 2, pp. 82-88, 2015.
25 Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques, Journal of Manufacturing Processes, M. Dawoud et al. / Journal of Manufacturing Processes 21 (2016) 39–45و Michael Dawoud∗, Iman Taha, Samy J. Ebeid
26 Effect of processing parameters and graphite content
on the tribological behaviour of 3D printed acrylonitrile
butadiene styrene Einfluss von Prozessparametern und Graphitgehalt auf das tribologische Verhalten von 3D-Druck Acrylnitril-Butadien-Styrol
Bauteilen
M. Dawoud, I. Taha, S. J. Ebeid, Mat.-wiss. u. Werkstofftech. 2015, 46, No. 12
27 Control of natural fibre-thermoplastic composite performance by adequate selection of processing parameters. Menna A. Saleh, Iman Taha, Samy J. Ebeid (submitted for publication)
Published Research in Confernces:
1 Ultrasonic Assisted Laser Machining, 18th International MTDR Conf., London, England, UK., 1977.
2 Further Effects of Process Parameters on The Incidence of Sparking in ECM, 19th International MTDR Conf., Manchester, England, UK., 1978.
3 ECM Accuracy Assessed by Gap Inlet Parameters, 2nd Joint Polytechnic Symposium on Manufacturing Engg., Coventry, England, UK., 1979.
4 Side Gap Estimation in Electrochemical Drilling, 1st Cairo Univ. Conf. MDP., 1979.
5 Surface Finish Factor For Spark Erosion Machining, 1st Cairo Univ. Conf. MDP., 1979.
6 Electrochemical Broaching, ISEM 6, Cracow, Poland, 1980.
7 Dimensional Tolerances of Non-Conventionally Produced Components, 1st Int. Conf. PEDAC, Alexandria, 1980.
8 Spike Formation in ECM, 1st Int. Conf. on Production Engg., Cairo and Leicester, 1981.
9 Characteristics Of Relatively High Feed Rate ECM Processes, 1st Int. Conf. on Production Engg., Cairo and Leicester, 1981.
10 Technological Research for Promoting Productivity in Non Conventional Machining, 2nd Int. Conf. on Technology for Development, Cairo, Egypt, 1982.
11 An Investigation into EDM Fine Hole Drilling, 10th North American Manufacturing Research Conf., NAMRC, Hamilton, Canada, 1982.
12 Non-conventional Drilling Processes, 2nd MDP Conf., Cairo, Egypt, 1982.
13 Tool Design and Progressive Shape Formations During EC Broaching, 24th International MTDR Conf., Manchester, England, UK., 1983.
14 Electrochemical Wire Cutting, 24th International MTDR Conf., Manchester, England, UK., 1983.
15 Improved Performance in Modern Machining Processes, 1st AME Conf., Cairo, Egypt, 1984.
16 Beneficial Effects of Orbital Motion in EDM, 1st Int. PEDD Conf., Cairo, Egypt, 1984.
17 EC Broaching and Stationary Cutting - A Comparative Study, 3rd MDP Conf., Cairo, Egypt, 1985.
18 Computerized Machinability Data Base Systems as Applied to ECM and EDM, 2nd AME Conf., Cairo, Egypt, 1986.
19 On the Prediction and Control of ECM Surfaces, 5th Polytechnic Symposium on Manufacturing Engg., Brighton, England, UK., 1986.
20 Mathematical Modeling For EC Turning, PEDAC Conf., Alexandria, Egypt, 1992.
21 Effect of Variable Feed Rate on ECM Shaping, 6th AMME Conf., Cairo, Egypt, 1994.
22 ECM Performance Using Super-Conductive Electrolytes, 5th Int. PEDD Conf., Cairo, Egypt, 1998.
23 Towards Better ECM Accuracy through Orbital Motion, 5th Int. PEDD Conf., Cairo, Egypt, 1998.
24 ECM Performance Under Orbital Motion, Int. APE 98 Conf., Warsaw, Poland, 1998.
25 Ultrasonic Precision Cutting, 18th Int. CAPE Conf., Edinburgh, UK., 18-19 March 2003 .
26 An Operating and Diagnostic Knowledge-Based System for Wire EDM, 7th Int. Conf. KES, Oxford, UK, 3-5 Sept., 2003.
27 ECM Assisted by Low Frequency Vibrations, 20th International Manufacturing Conference, Cork, Ireland, 3-5 Sept. 2003
28 Improvement of Roundness of Cylindrical Parts using Hybrid Electrochemical Smoothing and Roller Burnishing Process, 35th International MATADOR Conference, 18-20 July, National Taiwan University, Taipei, Taiwan, 2007.
29 Factors Affecting the Performance of Magneto-Rheological Clutches, 8th International Conference on Production Engineering for Design and Development PEDD 8, Cairo, Egypt, 9-10 March, 2010
30 Characterization of Shear Deformation of Woven Fabric Reinforcements for Polymer Composites Applications, Smartex Conf. Kafr-El-Sheikh, Jul, 2011.
31 Effect of process parameters on abrasive water jet plain milling, Al-Azhar Engineering 13th Int. Conference, 23-25 Dec 2014.
Educational and Research Projects:
Not Available
Consulting and Engineering Projects:
Participation in the Design and Erection of Frozen Vegetable Factories. Design of the software programs for operation and control, in addition to training the engineers on their utilization.
Supervised Thesis:
1 M.Sc. 13 Theses
2 Ph.D. 8 Theses

Other:
- Ex Member of the scientific committee for the promotion of professors.
- Ex Member of the Egyptian national committee for welding technology.